On 19 July 2018 at 19:36, Stuart Henderson <s...@spacehopper.org> wrote: > > On 2018/07/19 10:00, Bryan Vyhmeister wrote: > > I am wanting to add the WD Black High-performance NVMe SSD PCI > > IDs to pcidevs and I am not sure how to proceed. WD bought Sandisk a > > while back but the vendor ID is 15b7 which is Sandisk Corp. The product > > itself is WD Black High-performance NVMe SSD and is labeled as Western > > Digital. The vendor ID of 15b7 does not exist in our pcidevs at this > > point. Should I create a diff as 15b7 being Sandisk or Western Digital? > > There are only two products listed under 15b7 that I have found (2001 > > and 5001) and this SSD I have is a new (third) one (5002). My intention > > is to add the information for 5001 and 5002 which are the original WD > > Black NVMe SSD and the new WD Black High-performance NVMe SSD. I have > > both 500GB and 1TB versions which share the same product ID as expected. > > Output from dmesg and pcidump is below. > > AFAIK typically we list under the original vendor name though I'm sure > there are exceptions to this. My vote would be for listing as Sandisk. >
But at this point the origin of new devices is WD. I think since it's a new addition it should go by WD to reduce potential confusion in the future.