Note that the neighbor entry is in state S (stale). Whatever that means... On Thu, Aug 02, 2018 at 04:44:57PM +0100, Stuart Henderson wrote: > On 2018/08/01 23:18, Florian Obser wrote: > > I'm chasing a bug in IPv6 where ndp reports an entry as (incomplete) > > but when you try to reach that target no neighbor solicitation is > > send. > > Not sure if it's related or not but I've seen weird v6 behaviour on > my workstation for a while which I've been trying to figure out in order > to get enough information together to make a useful report. But since you > have problems in a similar area I'll mention it now before figuring any > more out in case it's relevant. > > Trying to connect to any host (directly connected or remote) fails with > EHOSTUNREACH, but the route is there, ndp is there, PF is not in the way > (I see the same with pfctl -d). No difference with the nd6_timer_next diff. > > > $ cat /etc/mygate > 82.68.199.142 > 2a02:8011:7003:1::1 > $ ifconfig vlan2 > vlan2: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > lladdr f8:b1:56:ac:32:76 > index 6 priority 0 llprio 3 > encap: vnetid 2 parent em0 > groups: vlan egress > media: Ethernet autoselect (1000baseT full-duplex,rxpause,txpause) > status: active > inet 82.68.199.130 netmask 0xfffffff0 broadcast 82.68.199.143 > inet6 fe80::78d8:e34b:df38:885e%vlan2 prefixlen 64 scopeid 0x6 > inet6 2a02:8011:7003:1:fab1:56ff:feac:3276 prefixlen 64 > $ ifconfig -A|grep inet6 > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 > inet6 fe80::78d8:e34b:df38:885e%vlan2 prefixlen 64 scopeid 0x6 > inet6 2a02:8011:7003:1:fab1:56ff:feac:3276 prefixlen 64 > $ netstat -rnfinet6 > Routing tables > > Internet6: > Destination Gateway Flags > Refs Use Mtu Prio Iface > default 2a02:8011:7003:1::1 UGS > 1 2560 - 8 vlan2 > ::/96 ::1 UGRS > 0 0 32768 8 lo0 > ::1 ::1 UHhl > 10 22 32768 1 lo0 > ::ffff:0.0.0.0/96 ::1 UGRS > 0 0 32768 8 lo0 > 2002::/24 ::1 UGRS > 0 0 32768 8 lo0 > 2002:7f00::/24 ::1 UGRS > 0 0 32768 8 lo0 > 2002:e000::/20 ::1 UGRS > 0 0 32768 8 lo0 > 2002:ff00::/24 ::1 UGRS > 0 0 32768 8 lo0 > 2a02:8011:7003:1::/64 2a02:8011:7003:1:fab1:56ff:feac:3276 UCn > 2 0 - 4 vlan2 > 2a02:8011:7003:1::1 00:0d:b9:41:7e:48 UHLch > 1 13 - 3 vlan2 > 2a02:8011:7003:1:20d:93ff:fe63:da5a 00:0d:b9:14:30:ec UHLc > 1 12 - 3 vlan2 > 2a02:8011:7003:1:fab1:56ff:feac:3276 f8:b1:56:ac:32:76 UHLl > 1 36 - 1 vlan2 > fe80::/10 ::1 UGRS > 0 1 32768 8 lo0 > fec0::/10 ::1 UGRS > 0 0 32768 8 lo0 > fe80::1%lo0 fe80::1%lo0 UHl > 0 0 32768 1 lo0 > fe80::%vlan2/64 fe80::78d8:e34b:df38:885e%vlan2 UCn > 0 0 - 4 vlan2 > fe80::78d8:e34b:df38:885e%vlan2 f8:b1:56:ac:32:76 UHLl > 0 0 - 1 vlan2 > ff01::/16 ::1 UGRS > 0 1 32768 8 lo0 > ff01::%lo0/32 ::1 Um > 0 1 32768 4 lo0 > ff01::%vlan2/32 fe80::78d8:e34b:df38:885e%vlan2 Um > 0 1 - 4 vlan2 > ff02::/16 ::1 UGRS > 0 1 32768 8 lo0 > ff02::%lo0/32 ::1 Um > 0 1 32768 4 lo0 > ff02::%vlan2/32 fe80::78d8:e34b:df38:885e%vlan2 Um > 0 1 - 4 vlan2 > $ ndp -na > Neighbor Linklayer Address Netif Expire S > Flags > 2a02:8011:7003:1::1 00:0d:b9:41:7e:48 vlan2 23h54m6s S R > 2a02:8011:7003:1:20d:93ff:fe63:da5a 00:0d:b9:14:30:ec vlan2 23h54m9s S > 2a02:8011:7003:1:fab1:56ff:feac:3276 f8:b1:56:ac:32:76 vlan2 permanent R l > fe80::78d8:e34b:df38:885e%vlan2 f8:b1:56:ac:32:76 vlan2 permanent R l > $ ping6 mala > PING mala.spacehopper.org (2a02:8011:7003:1:20d:93ff:fe63:da5a): 56 data bytes > ping6: sendmsg: No route to host > ping: wrote mala.spacehopper.org 64 chars, ret=-1 > ^C > --- mala.spacehopper.org ping statistics --- > 1 packets transmitted, 0 packets received, 100.0% packet loss > $ telnet -6 mala 22 > Trying 2a02:8011:7003:1:20d:93ff:fe63:da5a... > telnet: connect to address 2a02:8011:7003:1:20d:93ff:fe63:da5a: No route to > host > $ route -n get -inet6 mala > route to: 2a02:8011:7003:1:20d:93ff:fe63:da5a > destination: 2a02:8011:7003:1:20d:93ff:fe63:da5a > mask: ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff > interface: vlan2 > if address: 2a02:8011:7003:1:fab1:56ff:feac:3276 > priority: 3 () > flags: <UP,HOST,DONE,LLINFO,CLONED> > use mtu expire > 15 0 86026 > $ ifconfig -A|grep AUTO > $ sysctl -a|grep inet6 > net.inet6.ip6.forwarding=0 > net.inet6.ip6.redirect=1 > net.inet6.ip6.hlim=64 > net.inet6.ip6.mrtproto=0 > net.inet6.ip6.maxfragpackets=200 > net.inet6.ip6.log_interval=5 > net.inet6.ip6.hdrnestlimit=10 > net.inet6.ip6.dad_count=1 > net.inet6.ip6.auto_flowlabel=1 > net.inet6.ip6.defmcasthlim=1 > net.inet6.ip6.use_deprecated=1 > net.inet6.ip6.maxfrags=200 > net.inet6.ip6.mforwarding=0 > net.inet6.ip6.multipath=0 > net.inet6.ip6.multicast_mtudisc=0 > net.inet6.ip6.neighborgcthresh=2048 > net.inet6.ip6.maxdynroutes=4096 > net.inet6.ip6.dad_pending=0 > net.inet6.ip6.mtudisctimeout=600 > net.inet6.ip6.ifq.len=0 > net.inet6.ip6.ifq.maxlen=2048 > net.inet6.ip6.ifq.drops=0 > net.inet6.icmp6.redirtimeout=600 > net.inet6.icmp6.nd6_delay=5 > net.inet6.icmp6.nd6_umaxtries=3 > net.inet6.icmp6.nd6_mmaxtries=3 > net.inet6.icmp6.errppslimit=100 > net.inet6.icmp6.nd6_maxnudhint=0 > net.inet6.icmp6.mtudisc_hiwat=1280 > net.inet6.icmp6.mtudisc_lowat=256 > net.inet6.icmp6.nd6_debug=0 > net.inet6.divert.recvspace=65636 > net.inet6.divert.sendspace=65636 > $ dmesg > OpenBSD 6.3-current (GENERIC.MP) #14: Thu Aug 2 16:20:57 BST 2018 > [email protected]:/sys/arch/amd64/compile/GENERIC.MP > real mem = 17067200512 (16276MB) > avail mem = 16540770304 (15774MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xec400 (92 entries) > bios0: vendor Dell Inc. version "A12" date 05/11/2017 > bios0: Dell Inc. PowerEdge T20 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S4 S5 > acpi0: tables DSDT FACP APIC FPDT SLIC LPIT SSDT SSDT SSDT HPET SSDT MCFG > SSDT ASF! DMAR > acpi0: wakeup devices UAR1(S4) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) > PXSX(S4) RP05(S4) PXSX(S4) PXSX(S4) PXSX(S4) GLAN(S4) EHC1(S3) EHC2(S3) > XHC_(S4) HDEF(S4) [...] > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Xeon(R) CPU E3-1225 v3 @ 3.20GHz, 3392.61 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,MELTDOWN > cpu0: 256KB 64b/line 8-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 99MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4, IBE > cpu1 at mainbus0: apid 2 (application processor) > cpu1: Intel(R) Xeon(R) CPU E3-1225 v3 @ 3.20GHz, 3392.16 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,MELTDOWN > cpu1: 256KB 64b/line 8-way L2 cache > cpu1: smt 0, core 1, package 0 > cpu2 at mainbus0: apid 4 (application processor) > cpu2: Intel(R) Xeon(R) CPU E3-1225 v3 @ 3.20GHz, 3392.16 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,MELTDOWN > cpu2: 256KB 64b/line 8-way L2 cache > cpu2: smt 0, core 2, package 0 > cpu3 at mainbus0: apid 6 (application processor) > cpu3: Intel(R) Xeon(R) CPU E3-1225 v3 @ 3.20GHz, 3392.16 MHz > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,MELTDOWN > cpu3: 256KB 64b/line 8-way L2 cache > cpu3: smt 0, core 3, package 0 > ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins > acpihpet0 at acpi0: 14318179 Hz > acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 1 (RP01) > acpiprt2 at acpi0: bus 2 (RP02) > acpiprt3 at acpi0: bus 4 (RP05) > acpiprt4 at acpi0: bus -1 (PEG0) > acpiprt5 at acpi0: bus -1 (PEG1) > acpiprt6 at acpi0: bus -1 (PEG2) > acpiec0 at acpi0: not present > acpicpu0 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS > acpicpu1 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS > acpicpu2 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS > acpicpu3 at acpi0: C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS > acpitz0 at acpi0: critical temperature is 105 degC > acpitz1 at acpi0: critical temperature is 105 degC > acpicmos0 at acpi0 > "INT3F0D" at acpi0 not configured > acpibtn0 at acpi0: PWRB > "PNP0C14" at acpi0 not configured > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: DD1F > cpu0: Enhanced SpeedStep 3392 MHz: speeds: 3201, 3200, 3000, 2900, 2700, > 2500, 2300, 2200, 2000, 1800, 1700, 1500, 1300, 1100, 1000, 800 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Xeon E3-1200 v3 Host" rev 0x06 > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics P4600" rev 0x06 > drm0 at inteldrm0 > inteldrm0: msi > inteldrm0: 1920x1200, 32bpp > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > "Intel 8 Series xHCI" rev 0x04 at pci0 dev 20 function 0 not configured > "Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > puc0 at pci0 dev 22 function 3 "Intel 8 Series KT" rev 0x04: ports: 16 com > com4 at puc0 port 0 apic 8 int 19: ns16550a, 16 byte fifo > com4: probed fifo depth: 0 bytes > em0 at pci0 dev 25 function 0 "Intel I217-LM" rev 0x04: msi, address > f8:b1:56:ac:32:76 > ehci0 at pci0 dev 26 function 0 "Intel 8 Series USB" rev 0x04: apic 8 int 16 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 > addr 1 > azalia0 at pci0 dev 27 function 0 "Intel 8 Series HD Audio" rev 0x04: msi > azalia0: codecs: Realtek/0x0280 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xd4 > pci1 at ppb0 bus 1 > ppb1 at pci0 dev 28 function 1 "Intel 8 Series PCIE" rev 0xd4: msi > pci2 at ppb1 bus 2 > ppb2 at pci2 dev 0 function 0 "TI XIO2001 PCIE-PCI" rev 0x00 > pci3 at ppb2 bus 3 > ppb3 at pci0 dev 28 function 4 "Intel 8 Series PCIE" rev 0xd4: msi > pci4 at ppb3 bus 4 > nvme0 at pci4 dev 0 function 0 "Samsung SM961/PM961 NVMe" rev 0x00: msi, NVMe > 1.2 > nvme0: SAMSUNG MZVLW256HEHP-000L7, firmware 4L7QCXB7, serial S35ENX0J765205 > scsibus1 at nvme0: 1 targets > sd0 at scsibus1 targ 0 lun 0: <NVMe, SAMSUNG MZVLW256, 4L7Q> SCSI4 0/direct > fixed > sd0: 244198MB, 512 bytes/sector, 500118192 sectors > ehci1 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 8 int 23 > usb1 at ehci1: USB revision 2.0 > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 > addr 1 > pcib0 at pci0 dev 31 function 0 "Intel C226 LPC" rev 0x04 > ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi, AHCI 1.3 > ahci0: port 0: 6.0Gb/s > scsibus2 at ahci0: 32 targets > sd1 at scsibus2 targ 0 lun 0: <ATA, Samsung SSD 850, EMT0> SCSI3 0/direct > fixed naa.5002538d4086e2f8 > sd1: 476940MB, 512 bytes/sector, 976773168 sectors, thin > ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x04: apic 8 int > 18 > iic0 at ichiic0 > sdtemp0 at iic0 addr 0x18: se97 > sdtemp1 at iic0 addr 0x19: mcp98243 > sdtemp2 at iic0 addr 0x1a: se97 > sdtemp3 at iic0 addr 0x1b: mcp98243 > spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM ECC PC3-12800 with thermal sensor > spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM ECC PC3-12800 with thermal sensor > spdmem2 at iic0 addr 0x52: 4GB DDR3 SDRAM ECC PC3-12800 with thermal sensor > spdmem3 at iic0 addr 0x53: 4GB DDR3 SDRAM ECC PC3-12800 with thermal sensor > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > com0: console > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > vmm0 at mainbus0: VMX/EPT > uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > rev 2.00/0.04 addr 2 > uaudio0 at uhub2 port 3 configuration 1 interface 0 "EDIROL UA-1EX" rev > 1.10/1.00 addr 3 > uaudio0: audio rev 1.00, 0 mixer controls > audio1 at uaudio0 > uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > rev 2.00/0.04 addr 2 > uhub4 at uhub3 port 3 configuration 1 interface 0 "GenesysLogic USB2.0 Hub" > rev 2.00/92.24 addr 3 > uplcom0 at uhub4 port 1 configuration 1 interface 0 "Prolific Technology Inc. > USB-Serial Controller" rev 1.10/3.00 addr 4 > ucom0 at uplcom0 > uhub4: device problem, disabling port 2 > umass0 at uhub4 port 3 configuration 1 interface 0 "Realtek USB3.0 Card > Reader" rev 2.10/1.32 addr 5 > umass0: using SCSI over Bulk-Only > scsibus3 at umass0: 2 targets, initiator 0 > sd2 at scsibus3 targ 1 lun 0: <Generic-, USB3.0 CRW-CF/MD, 1.00> SCSI2 > 0/direct removable > sd3 at scsibus3 targ 1 lun 1: <Generic-, USB3.0 CRW-SM/xD, 1.00> SCSI2 > 0/direct removable > sd4 at scsibus3 targ 1 lun 2: <Generic-, USB3.0 CRW-SD, 1.00> SCSI2 0/direct > removable > sd5 at scsibus3 targ 1 lun 3: <Generic-, USB3.0 CRW-MS, 1.00> SCSI2 0/direct > removable > sd6 at scsibus3 targ 1 lun 4: <Generic-, USB3.0 CRW-SD/MS, 1.00> SCSI2 > 0/direct removable > uhub5 at uhub3 port 4 configuration 1 interface 0 "Texas Instruments product > 0x8142" rev 2.10/1.00 addr 6 > uhub6 at uhub5 port 4 configuration 1 interface 0 "Texas Instruments product > 0x8142" rev 2.10/1.00 addr 7 > uhidev0 at uhub3 port 5 configuration 1 interface 0 "Lite-On Technology Corp. > ThinkPad USB Keyboard with TrackPoint" rev 1.10/1.27 addr 8 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 6 key codes > wskbd1 at ukbd0 mux 1 > wskbd1: connecting to wsdisplay0 > uhidev1 at uhub3 port 5 configuration 1 interface 1 "Lite-On Technology Corp. > ThinkPad USB Keyboard with TrackPoint" rev 1.10/1.27 addr 8 > uhidev1: iclass 3/0, 4 report ids > ums0 at uhidev1 reportid 1: 3 buttons > wsmouse0 at ums0 mux 0 > uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0 > uhid1 at uhidev1 reportid 3: input=3, output=1, feature=0 > uhid2 at uhidev1 reportid 4: input=0, output=0, feature=4 > uhub7 at uhub3 port 6 configuration 1 interface 0 "Genesys Logic USB2.0 Hub" > rev 2.00/77.64 addr 9 > uhub8 at uhub7 port 4 configuration 1 interface 0 "Genesys Logic USB2.0 Hub" > rev 2.00/77.64 addr 10 > vscsi0 at root > scsibus4 at vscsi0: 256 targets > softraid0 at root > scsibus5 at softraid0: 256 targets > root on sd1a (55d00535300500ff.a) swap on sd1b dump on sd1b > wskbd1: disconnecting from wsdisplay0 > wskbd1 detached > ukbd0 detached > uhidev0 detached > wsmouse0 detached > ums0 detached > uhid0 detached > uhid1 detached > uhid2 detached > uhidev1 detached > arp_rtrequest: bad gateway value: vlan5 > uhidev0 at uhub3 port 5 configuration 1 interface 0 "Lite-On Technology Corp. > ThinkPad USB Keyboard with TrackPoint" rev 1.10/1.27 addr 8 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 6 key codes > wskbd1 at ukbd0: console keyboard, using wsdisplay0 > uhidev1 at uhub3 port 5 configuration 1 interface 1 "Lite-On Technology Corp. > ThinkPad USB Keyboard with TrackPoint" rev 1.10/1.27 addr 8 > uhidev1: iclass 3/0, 4 report ids > ums0 at uhidev1 reportid 1: 3 buttons > wsmouse0 at ums0 mux 0 > uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0 > uhid1 at uhidev1 reportid 3: input=3, output=1, feature=0 > uhid2 at uhidev1 reportid 4: input=0, output=0, feature=4 >
-- I'm not entirely sure you are real.
