On Mon, Feb 25, 2019 at 03:50:48PM -0300, Martin Pieuchot wrote:
> On 25/02/19(Mon) 14:52, Nils Frohberg wrote:
> > Hi,
> >
> > as mentioned previously, I'm looking into axen(4). While searching
> > for the cause of a panic (fixed since, thanks mpi@) I started to
> > rewrite parts of the driver. References were mainly the FreeBSD and
> > Linux drivers.
>
> Please try to isolate parts of your diff that fixes issues and cosmetic
> changes. The simpler it gets the easier it is for us to review it.
Sure, I'll send separate patches.
(I cvs up'ed my src forder in order to test compile the individual
patches and found out that xhci.c,v1.91 breaks my USB devices. I'll
send a mail to bugs@ later.)
> > I didn't get around to much testing/debugging lately, therefore I
> > wanted to share the current state (diff below).
> >
> > The current state works a lot better than previously (for me). I
> > used to have a huge amount of ierrs (aprrox. 1 ierr per ipkt) and
> > often no packets would be transferred at all (or stop being transferred
> > after some time).
>
> Do you know why? What were the problems?
I'm not 100% sure, since I did a lot of back and forth. It finally
got better once I disabled EEE and lowered the watermark levels.
> > This box hosts backups (rsync and TimeMachine), so it gets its fair
> > share of traffic. I could reduce the ierrs to ~2100 with 5d uptime,
> > and the packets keep flowing:
> >
> > $ netstat -niI axen0
> > Name Mtu Network Address Ipkts Ierrs Opkts Oerrs
> > Colls
> > axen0 1500 <Link> 94:c6:91:1f:85:a5 141199356 2099 112289969 0
> > 0
> > $ uptime
> > 7:15PM up 5 days, 9:57, 3 users, load averages: 0.11, 0.13, 0.14
> > $
> >
> > But there a still a few problems:
> >
> > 1) There are still ierrs. These happen when the rx path can't
> > allocate mbufs (cf. diff below for DPRINTF):
> > axen0: could not allocate rx mbuf (2 total, 2 remaining)
> > axen0: could not allocate rx mbuf (3 total, 3 remaining)
> > axen0: could not allocate rx mbuf (2 total, 2 remaining)
> > axen0: could not allocate rx mbuf (1 total, 1 remaining)
>
> Look at the pools when this happen, what do you see? What is the size
> of `pkt_len' when this happen?
I added pkt_len to the DPRINTF so that I can check the relevant
pools once I see this error.
> > 2) If the adapter is plugged into a USB 3 port at boot, it will
> > return 0x42 when aked for AXEN_PHYSICAL_LINK_STATUS, ie.
> > (AXEN_EPHY_1000|AXEN_USB_HS). The adapter most often then simply
> > doesn't receive packets. If I plug in the adapter after boot is
> > complete, 0x44 is returned (AXEN_EPHY_1000|AXEN_USB_SS), as expected.
> > I'm not sure if I'm still missing something in init (probably) or
> > if this results from something higher in the stack (xhci?).
> > (Didn't test USB 2 or lower.)
>
> Do you see any difference in 'usbdevs -vv' output during the two cases?
Yes, high speed vs super speed and power draw:
# Plugged in after boot:
$ usbdevs -vv
Controller /dev/usb0:
addr 01: 8086:0000 Intel, xHCI root hub
super speed, self powered, config 1, rev 1.00
driver: uhub0
port 01: 0001.02a0 power Rx.detect
port 02: 0011.02a0 power Rx.detect
port 03: 0000.0503 connect enabled recovery
port 04: 0000.0503 connect enabled recovery
port 05: 0000.02a0 power Rx.detect
port 06: 0000.02a0 power Rx.detect
port 07: 0000.02a0 power Rx.detect
port 08: 0000.0103 connect enabled recovery
port 09: 0000.02a0 power Rx.detect
port 10: 0000.0203 connect enabled power U0
port 11: 0000.0203 connect enabled power U0
port 12: 0000.0203 connect enabled power U0
port 13: 0000.02a0 power Rx.detect
port 14: 0000.02a0 power Rx.detect
port 15: 0000.02a0 power Rx.detect
addr 04: 0bc2:ab44 Seagate, Backup+ Hub
high speed, self powered, config 1, rev 48.85, iSerial 01CB7236B0N6
driver: uhub2
port 01: 0000.0100 power
port 02: 0000.0100 power
port 03: 0000.0100 power
addr 05: 05e3:0610 GenesysLogic, USB2.0 Hub
high speed, self powered, config 1, rev 92.16
driver: uhub3
port 01: 0000.0100 power
port 02: 0000.0100 power
port 03: 0000.0100 power
port 04: 0000.0100 power
addr 06: 8087:0aa7 Intel, product 0x0aa7
full speed, self powered, config 1, rev 0.01
driver: ugen0
addr 07: 0bc2:ab45 Seagate, Backup+ Hub
super speed, self powered, config 1, rev 48.85, iSerial 01CB7236B0N6
driver: uhub4
port 01: 0000.0203 connect enabled power U0
port 02: 0000.02a0 power Rx.detect
port 03: 0000.0203 connect enabled power U0
addr 08: 0bc2:ab38 Seagate, Backup+ Hub BK
super speed, self powered, config 1, rev 1.00, iSerial NA8TMK6F
driver: umass0
addr 09: 05e3:0612 GenesysLogic, USB3.0 Hub
super speed, self powered, config 1, rev 92.16
driver: uhub5
port 01: 0000.02a0 power Rx.detect
port 02: 0000.02a0 power Rx.detect
port 03: 0000.02a0 power Rx.detect
port 04: 0000.0203 connect enabled power U0
addr 10: 1058:25a2 Western Digital, Elements 25A2
super speed, power 224 mA, config 1, rev 10.14, iSerial
575854314131373838593538
driver: umass1
addr 11: 0b95:1790 ASIX Elec. Corp., AX88179
super speed, power 124 mA, config 1, rev 1.00, iSerial 0000000000013F
driver: axen0
addr 12: 2109:0701 Intenso, External USB 3.0
super speed, self powered, config 1, rev 3.07, iSerial 20130301005083
driver: umass2
$
# Plugged in before boot:
$ usbdevs -vv
Controller /dev/usb0:
addr 01: 8086:0000 Intel, xHCI root hub
super speed, self powered, config 1, rev 1.00
driver: uhub0
port 01: 0001.02a0 power Rx.detect
port 02: 0000.0503 connect enabled recovery
port 03: 0000.0503 connect enabled recovery
port 04: 0000.0503 connect enabled recovery
port 05: 0000.02a0 power Rx.detect
port 06: 0000.02a0 power Rx.detect
port 07: 0000.02a0 power Rx.detect
port 08: 0000.0103 connect enabled recovery
port 09: 0000.02a0 power Rx.detect
port 10: 0000.02a0 power Rx.detect
port 11: 0000.0203 connect enabled power U0
port 12: 0000.0203 connect enabled power U0
port 13: 0000.02a0 power Rx.detect
port 14: 0000.02a0 power Rx.detect
port 15: 0000.02a0 power Rx.detect
addr 04: 0b95:1790 ASIX Elec. Corp., AX88179
high speed, power 248 mA, config 1, rev 1.00, iSerial 0000000000013F
driver: axen0
addr 05: 0bc2:ab44 Seagate, Backup+ Hub
high speed, self powered, config 1, rev 48.85, iSerial 01CB7236B0N6
driver: uhub2
port 01: 0000.0100 power
port 02: 0000.0100 power
port 03: 0000.0100 power
addr 06: 05e3:0610 GenesysLogic, USB2.0 Hub
high speed, self powered, config 1, rev 92.16
driver: uhub3
port 01: 0000.0100 power
port 02: 0000.0100 power
port 03: 0000.0100 power
port 04: 0000.0100 power
addr 07: 8087:0aa7 Intel, product 0x0aa7
full speed, self powered, config 1, rev 0.01
driver: ugen0
addr 08: 0bc2:ab45 Seagate, Backup+ Hub
super speed, self powered, config 1, rev 48.85, iSerial 01CB7236B0N6
driver: uhub4
port 01: 0000.0203 connect enabled power U0
port 02: 0000.02a0 power Rx.detect
port 03: 0000.02b0 power Rx.detect
addr 09: 0bc2:ab38 Seagate, Backup+ Hub BK
super speed, self powered, config 1, rev 1.00, iSerial NA8TMK6F
driver: umass0
addr 10: 05e3:0612 GenesysLogic, USB3.0 Hub
super speed, self powered, config 1, rev 92.16
driver: uhub5
port 01: 0000.02a0 power Rx.detect
port 02: 0000.02a0 power Rx.detect
port 03: 0000.02a0 power Rx.detect
port 04: 0000.0203 connect enabled power U0
addr 11: 1058:25a2 Western Digital, Elements 25A2
super speed, power 224 mA, config 1, rev 10.14, iSerial
575854314131373838593538
driver: umass1
$
Here's a dmesg:
OpenBSD 6.4-current (AXEN_DEBUG) #58: Tue Feb 26 13:42:44 CET 2019
bu...@build.tako.de:/usr/src/sys/arch/amd64/compile/AXEN_DEBUG
real mem = 8415174656 (8025MB)
avail mem = 8150171648 (7772MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0x79a9a000 (51 entries)
bios0: vendor Intel Corp. version "AYAPLCEL.86A.0056.2018.0926.1100" date
09/26/2018
bios0: Intel Corporation NUC6CAYH
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP FPDT FIDT MCFG DBG2 DBGP HPET LPIT APIC NPKT PRAM WSMT
SSDT SSDT SSDT SSDT SSDT SSDT SSDT UEFI BGRT TPM2 DMAR WDAT NHLT
acpi0: wakeup devices SIO1(S3) HDAS(S3) XHC_(S4) XDCI(S4) BRCM(S0) PXSX(S4)
RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4)
RP05(S4) PXSX(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 19200000 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Celeron(R) CPU J3455 @ 1.50GHz, 1496.67 MHz, 06-5c-09
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu0: 1MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 19MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.2.4.2.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Celeron(R) CPU J3455 @ 1.50GHz, 1496.55 MHz, 06-5c-09
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu1: 1MB 64b/line 16-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Celeron(R) CPU J3455 @ 1.50GHz, 1496.55 MHz, 06-5c-09
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu2: 1MB 64b/line 16-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Celeron(R) CPU J3455 @ 1.50GHz, 1496.55 MHz, 06-5c-09
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu3: 1MB 64b/line 16-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 120 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (RP01)
acpiprt2 at acpi0: bus -1 (RP02)
acpiprt3 at acpi0: bus 1 (RP03)
acpiprt4 at acpi0: bus 2 (RP04)
acpiprt5 at acpi0: bus 3 (RP05)
acpiprt6 at acpi0: bus -1 (RP06)
acpiec0 at acpi0
acpicpu0 at acpi0: C1(@1 halt!), PSS
acpicpu1 at acpi0: C1(@1 halt!), PSS
acpicpu2 at acpi0: C1(@1 halt!), PSS
acpicpu3 at acpi0: C1(@1 halt!), PSS
acpipwrres0 at acpi0: FN00, resource for FAN0
acpitz0 at acpi0: critical temperature is 100 degC
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
"INT3452" at acpi0 not configured
"INT3452" at acpi0 not configured
"INT3452" at acpi0 not configured
"INT3452" at acpi0 not configured
"INT33A1" at acpi0 not configured
"MSFT0101" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: Enhanced SpeedStep 1496 MHz: speeds: 1501, 1500, 1400, 1300, 1200, 1100,
1000, 900, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Apollo Lake Host" rev 0x0b
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 500" rev 0x0b
drm0 at inteldrm0
inteldrm0: msi
error: [drm:pid0:i915_firmware_load_error_print] *ERROR* failed to load
firmware i915/bxt_dmc_ver1.bin (-22)
error: [drm:pid0:i915_gem_init_hw] *ERROR* Failed to initialize GuC, error -8
(ignored)
inteldrm0: 1680x1050, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
azalia0 at pci0 dev 14 function 0 "Intel Apollo Lake HD Audio" rev 0x0b: msi
azalia0: codecs: Realtek/0x0283, Intel/0x280a, using Realtek/0x0283
audio0 at azalia0
"Intel Apollo Lake TXE" rev 0x0b at pci0 dev 15 function 0 not configured
ahci0 at pci0 dev 18 function 0 "Intel Apollo Lake AHCI" rev 0x0b: msi, AHCI
1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: PHY offline on port 1
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, KINGSTON SA400S3, SBFK> SCSI3 0/direct
fixed naa.50026b7682433dc5
sd0: 114473MB, 512 bytes/sector, 234441648 sectors, thin
ppb0 at pci0 dev 19 function 0 "Intel Apollo Lake PCIE" rev 0xfb: msi
pci1 at ppb0 bus 1
rtsx0 at pci1 dev 0 function 0 "Realtek RTS5229 Card Reader" rev 0x01: msi
sdmmc0 at rtsx0: 4-bit, dma
ppb1 at pci0 dev 19 function 1 "Intel Apollo Lake PCIE" rev 0xfb: msi
pci2 at ppb1 bus 2
iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless-AC 3168" rev 0x10, msi
ppb2 at pci0 dev 19 function 2 "Intel Apollo Lake PCIE" rev 0xfb: msi
pci3 at ppb2 bus 3
re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x15: RTL8168H/8111H (0x5400),
msi, address 94:c6:91:1f:85:a5
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
xhci0 at pci0 dev 21 function 0 "Intel Apollo Lake xHCI" rev 0x0b: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
"Intel Apollo Lake I2C" rev 0x0b at pci0 dev 22 function 0 not configured
"Intel Apollo Lake HSUART" rev 0x0b at pci0 dev 24 function 0 not configured
"Intel Apollo Lake SPI" rev 0x0b at pci0 dev 25 function 0 not configured
"Intel Apollo Lake SPI" rev 0x0b at pci0 dev 25 function 1 not configured
"Intel Apollo Lake SPI" rev 0x0b at pci0 dev 25 function 2 not configured
pcib0 at pci0 dev 31 function 0 "Intel Apollo Lake LPC" rev 0x0b
ichiic0 at pci0 dev 31 function 1 "Intel Apollo Lake SMBus" rev 0x0b: polling
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-14200 SO-DIMM
spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-14200 SO-DIMM
isa0 at pcib0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: probed fifo depth: 0 bytes
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
fdc0: drive 0: unknown device type 0xf0
uhub1 at uhub0 port 1 configuration 1 interface 0 "Mitsumi Electric Hub in
Apple Extended USB Keyboard" rev 1.10/4.20 addr 2
uhidev0 at uhub1 port 3 configuration 1 interface 0 "Mitsumi Electric Apple
Extended USB Keyboard" rev 1.10/4.20 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 13
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 3 configuration 1 interface 1 "Mitsumi Electric Apple
Extended USB Keyboard" rev 1.10/4.20 addr 3
uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
fdc0: drive 1: unknown device type 0xd0
axen0 at uhub0 port 2 configuration 1 interface 0 "ASIX Elec. Corp. AX88179"
rev 2.10/1.00 addr 4
axen0: AX88179, address 94:c6:91:1f:85:a5
rgephy1 at axen0 phy 3: RTL8169S/8110S/8211 PHY, rev. 5
uhub2 at uhub0 port 3 configuration 1 interface 0 "Seagate Backup+ Hub" rev
2.10/48.85 addr 5
uhub3 at uhub0 port 4 configuration 1 interface 0 "GenesysLogic USB2.0 Hub" rev
2.10/92.16 addr 6
ugen0 at uhub0 port 8 "Intel product 0x0aa7" rev 2.00/0.01 addr 7
uhub4 at uhub0 port 11 configuration 1 interface 0 "Seagate Backup+ Hub" rev
3.00/48.85 addr 8
umass0 at uhub4 port 1 configuration 1 interface 0 "Seagate Backup+ Hub BK" rev
3.10/1.00 addr 9
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <Seagate, Backup+ Hub BK, D781> SCSI4 0/direct
fixed
sd1: 7630885MB, 512 bytes/sector, 15628053167 sectors
uhub5 at uhub0 port 12 configuration 1 interface 0 "GenesysLogic USB3.0 Hub"
rev 3.00/92.16 addr 10
umass1 at uhub5 port 4 configuration 1 interface 0 "Western Digital Elements
25A2" rev 3.00/10.14 addr 11
umass1: using SCSI over Bulk-Only
scsibus3 at umass1: 2 targets, initiator 0
sd2 at scsibus3 targ 1 lun 0: <WD, Elements 25A2, 1014> SCSI4 0/direct fixed
serial.105825a2373838593538
sd2: 1907697MB, 512 bytes/sector, 3906963456 sectors
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
sd3 at scsibus5 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
sd3: 107519MB, 512 bytes/sector, 220200432 sectors
root on sd3a (b8ec0b353d2db63d.a) swap on sd3b dump on sd3b
iwm0: hw rev 0x220, fw ver 22.361476.0, address 0c:54:15:d0:a3:95
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev0 detached
uhid0 detached
uhid1 detached
uhidev1 detached
uhidev0 at uhub1 port 3 configuration 1 interface 0 "Mitsumi Electric Apple
Extended USB Keyboard" rev 1.10/4.20 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 13
wskbd1 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub1 port 3 configuration 1 interface 1 "Mitsumi Electric Apple
Extended USB Keyboard" rev 1.10/4.20 addr 3
uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
sd4 at scsibus5 targ 2 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
sd4: 1907694MB, 512 bytes/sector, 3906959213 sectors
sd5 at scsibus5 targ 3 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
sd5: 7630885MB, 512 bytes/sector, 15628052512 sectors
