On Tue, Oct 01, 2019 at 11:34:09AM +1000, Jonathan Gray wrote: > On Tue, Oct 01, 2019 at 12:27:48AM +0200, Jan Klemkow wrote: > > After updating my router to current, the systems hangs during the boot. > > Maybe its caused by the "invalid EDID"?! The System boots up normaly > > and doesn't hang, if I disable inteldrm(4) in UKC. > > > > Is this issue known? Or, witch additional debug information should I > > provide to help fixing this bug?
Hi Jonathan,
> Building a kernel with 'option DRMDEBUG' will give more information.
See the log below:
> Is the machine hooked up to a kvm or monitor?
No KVM and no monitor. Just serial access.
> What Lanner model is this? "gbXSo" doesn't help.
Lanner LEC-7233
Thanks,
Jan
Kernel boot messages with DRMDEBUG enabled:
The last part seems to repeat endlessly?!
[ using 2760504 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2019 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 6.6-beta (GENERIC.MP) #102: Wed Oct 2 09:10:14 CEST 2019
you...@fabien.klemkow.net:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2024398848 (1930MB)
avail mem = 1950064640 (1859MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xeca50 (49 entries)
bios0: vendor American Megatrends Inc. version "5.6.5" date 01/05/2017
bios0: Lanner Electronics gbXSo
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC FPDT LPIT MCFG HPET SSDT SSDT SSDT UEFI
acpi0: wakeup devices EHC1(S4) PXSX(S4) PXSX(S4) PXSX(S4) PXSX(S4) PWRB(S0)
BRCM(S0)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Celeron(R) CPU N2807 @ 1.58GHz, 1583.69 MHz, 06-37-08
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJUST,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu0: 1MB 64b/line 16-way L2 cache
tsc_timecounter_init: TSC skew=0 observed drift=0
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 83MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.0.0.0.3.3, IBE
cpu1 at mainbus0: apid 2 (application processor)
TSC skew=0
cpu1: Intel(R) Celeron(R) CPU N2807 @ 1.58GHz, 1583.34 MHz, 06-37-08
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,RDRAND,NXE,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,TSC_ADJUST,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,MELTDOWN
cpu1: 1MB 64b/line 16-way L2 cache
tsc_timecounter_init: TSC skew=0 observed drift=0
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 87 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (RP02)
acpiprt2 at acpi0: bus 3 (RP03)
acpiprt3 at acpi0: bus 4 (RP04)
acpiprt4 at acpi0: bus 1 (RP01)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C3(10@1500 mwait.1@0x52), C2(10@500 mwait.1@0x51), C1(1000@1
mwait.1), PSS
acpicpu1 at acpi0: C3(10@1500 mwait.1@0x52), C2(10@500 mwait.1@0x51), C1(1000@1
mwait.1), PSS
acpipwrres0 at acpi0: PLPE
acpipwrres1 at acpi0: PLPE
acpipwrres2 at acpi0: USBC, resource for EHC1, OTG1
acpipwrres3 at acpi0: CLK0, resource for CAM1
acpipwrres4 at acpi0: CLK1, resource for CAM0, CAM2
acpipwrres5 at acpi0: FN00, resource for FAN0
acpitz0 at acpi0: critical temperature is 90 degC
"INT3396" at acpi0 not configured
acpicmos0 at acpi0
acpipci0 at acpi0 PCI0: 0x00000004 0x00000011 0x00000001
"DMA0F28" at acpi0 not configured
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
"BCM2E1A" at acpi0 not configured
"BCM4752" at acpi0 not configured
"AUTH2750" at acpi0 not configured
"INTCF0B" at acpi0 not configured
"INTCF1A" at acpi0 not configured
"INTCF1C" at acpi0 not configured
"SMO91D0" at acpi0 not configured
"MSFT0002" at acpi0 not configured
"INT33BD" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround
cpu0: Enhanced SpeedStep 1583 MHz: speeds: 1577, 1494, 1411, 1328, 1245, 1162,
1079, 996, 913, 830, 747, 664, 581, 498 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Bay Trail Host" rev 0x0e
inteldrm0 at pci0 dev 2 function 0 "Intel Bay Trail Video" rev 0x0e
drm0 at inteldrm0
inteldrm0: msi
ahci0 at pci0 dev 19 function 0 "Intel Bay Trail AHCI" rev 0x0e: msi, AHCI 1.3
ahci0: port 0: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, InnoDisk Corp. -, S164> naa.524693f2ca20f959
sd0: 7641MB, 512 bytes/sector, 15649200 sectors, thin
"Intel Bay Trail TXE" rev 0x0e at pci0 dev 26 function 0 not configured
azalia0 at pci0 dev 27 function 0 "Intel Bay Trail HD Audio" rev 0x0e: msi
azalia0: no supported codecs
ppb0 at pci0 dev 28 function 0 "Intel Bay Trail PCIE" rev 0x0e: msi
pci1 at ppb0 bus 1
bwfm0 at pci1 dev 0 function 0 "Broadcom BCM4350" rev 0x08: msi
ppb1 at pci0 dev 28 function 1 "Intel Bay Trail PCIE" rev 0x0e: msi
pci2 at ppb1 bus 2
em0 at pci2 dev 0 function 0 "Intel I211" rev 0x03: msi, address
00:90:0b:50:f1:ed
ppb2 at pci0 dev 28 function 2 "Intel Bay Trail PCIE" rev 0x0e: msi
pci3 at ppb2 bus 3
em1 at pci3 dev 0 function 0 "Intel I211" rev 0x03: msi, address
00:90:0b:50:f1:ee
ppb3 at pci0 dev 28 function 3 "Intel Bay Trail PCIE" rev 0x0e: msi
pci4 at ppb3 bus 4
em2 at pci4 dev 0 function 0 "Intel I211" rev 0x03: msi, address
00:90:0b:50:f1:ef
ehci0 at pci0 dev 29 function 0 "Intel Bay Trail EHCI" rev 0x0e: apic 1 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
pcib0 at pci0 dev 31 function 0 "Intel Bay Trail LPC" rev 0x0e
ichiic0 at pci0 dev 31 function 3 "Intel Bay Trail SMBus" rev 0x0e: apic 1 int
18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
com1: probed fifo depth: 15 bytes
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT (using slow L1TF mitigation)
uhub1 at uhub0 port 1 configuration 1 interface 0 "Intel product 0x07e6" rev
2.00/0.14 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (bacfbb280db0e792.a) swap on sd0b dump on sd0b
[drm] WOPCM size: 1024KiB
[drm] enable_guc=0 (submission:no huc:no)
[drm] guc_log_level=0 (enabled:no, verbose:no, verbosity:0)
[drm] Allowed DC state mask 00
[drm] GTFIFODBG = 0x0810
[drm] ppgtt mode: 1
[drm] GGTT size = 2048M
[drm] GMADR size = 256M
[drm] DSM size = 64M
[drm] GEN6_STOLEN_RESERVED = 00000007
[drm] Memory reserved for graphics device: 65536K, usable: 64512K
[drm] graphic opregion physical addr: 0x79a39018
[drm] Public ACPI methods supported
[drm] ASLE supported
[drm] Found valid VBT in ACPI OpRegion (Mailbox #4)
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] Set default to SSC at 100000 kHz
[drm] VBT signature "$VBT VALLEYVIEW ", BDB version 155
[drm] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 0
lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
[drm] crt_ddc_bus_pin: 2
[drm] Failed to get panel details from OpRegion (-19)
[drm] Panel type: 2 (VBT)
[drm] DRRS supported mode is static
[drm] Found panel mode in BIOS VBT tables:
[drm] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
[drm] VBT initial LVDS value 42000300
[drm] VBT backlight PWM modulation frequency 200 Hz, active high, min
brightness 0, level 0, controller 0
[drm] DRRS State Enabled:0
[drm] No PSR BDB found.
[drm] No SDVO device info is found in VBT
[drm] rawclk rate: 200000 kHz
[drm] enabling always-on
[drm] enabling display
[drm] enabling dpio-tx-b-01
[drm] enabling dpio-tx-b-23
[drm] enabling dpio-tx-c-01
[drm] enabling dpio-tx-c-23
[drm] enabling dpio-common
[drm] Sanitized enable_fbc value: 0
[drm] 2 display pipes available.
[drm] CZ clock rate: 333333 kHz
[drm] Current CDCLK 333333 kHz, VCO 2000000 kHz, ref 0 kHz, bypass 0 kHz,
voltage level 2
[drm] Max CD clock rate: 400000 kHz
[drm] Max dotclock rate: 360000 kHz
[drm] crt adpa set to 0x80f40018
[drm] Adding DP connector on port B
[drm] using AUX B for port B (platform default)
[drm] Adding HDMI connector on port B
[drm] Using DDC pin 0x5 for port B (platform default)
[drm] CEC notifier get failed
[drm] Adding DP connector on port C
[drm] using AUX C for port C (platform default)
[drm] Adding HDMI connector on port C
[drm] Using DDC pin 0x4 for port C (platform default)
[drm] CEC notifier get failed
[drm]
[drm] [CRTC:44:pipe ] hw state readout: enabled
[drm] [CRTC:61:pipe ] hw state readout: disabled
[drm] pipe active planes 0x0
[drm] pipe active planes 0x0
[drm] pipe active planes 0x0
[drm] pipe active planes 0x0
[drm] pipe active planes 0x0
[drm] pipe active planes 0x0
[drm] pipe active planes 0x0
[drm] pipe active planes 0x0
[drm] [ENCODER:63:CR] hw state readout: enabled, pipe A
[drm] [ENCODER:64:DP ] hw state readout: disabled, pipe A
[drm] [ENCODER:68:HDMI ] hw state readout: disabled, pipe A
[drm] [ENCODER:72:DP ] hw state readout: disabled, pipe A
[drm] [ENCODER:74:HDMI ] hw state readout: disabled, pipe A
[drm] [CONNECTOR:62:VGA-] hw state readout: enabled
[drm] [CONNECTOR:65:DP-] hw state readout: disabled
[drm] [CONNECTOR:69:HDMI-A-] hw state readout: disabled
[drm] [CONNECTOR:73:DP-] hw state readout: disabled
[drm] [CONNECTOR:75:HDMI-A-] hw state readout: disabled
[drm] [CRTC:44:pipe ][setup_hw_state]
[drm] output_types: ANALOG (0x2)
[drm] cpu_transcoder: A, pipe bpp: 24, dithering: 0
[drm] audio: 0, infoframes: 0
[drm] requested mode:
[drm] Modeline 0:"800x600" 60 40000 720 840 968 1056 400 601 605 628 0x40 0x5
[drm] adjusted mode:
[drm] Modeline 0:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm] crtc timings: 40000 800 840 968 1056 600 601 605 628, type: 0x40 flags:
0x5
[drm] port clock: 40000, pipe src size: 720x400, pixel rate 40000
[drm] gmch pfit: control: 0x80000000, ratios: 0x0aab0e66, lvds border:
0x00000000
[drm] ips: 0, double wide: 0
[drm] dpll_hw_state: dpll: 0xf0002000, dpll_md: 0x3, fp0: 0x0, fp1: 0x0
[drm] planes on this crtc
[drm] [PLANE:28:primary ] disabled, scaler_id = 0
[drm] [PLANE:31:sprite ] disabled, scaler_id = 0
[drm] [PLANE:36:sprite ] disabled, scaler_id = 0
[drm] [PLANE:41:cursor ] disabled, scaler_id = 0
[drm] [CRTC:61:pipe ][setup_hw_state]
[drm] output_types: (0x0)
[drm] cpu_transcoder: B, pipe bpp: 0, dithering: 0
[drm] audio: 0, infoframes: 0
[drm] requested mode:
[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[drm] adjusted mode:
[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[drm] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[drm] port clock: 0, pipe src size: 0x0, pixel rate 0
[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border:
0x00000000
[drm] ips: 0, double wide: 0
[drm] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
[drm] planes on this crtc
[drm] [PLANE:45:primary ] disabled, scaler_id = 0
[drm] [PLANE:48:sprite ] disabled, scaler_id = 0
[drm] [PLANE:53:sprite ] disabled, scaler_id = 0
[drm] [PLANE:58:cursor ] disabled, scaler_id = 0
[drm] Initial watermarks: pipe A, plane=15, cursor=15, sprite0=15, sprite1=15
[drm] Initial watermarks: pipe B, plane=15, cursor=15, sprite0=15, sprite1=15
[drm] Initial watermarks: SR plane=127, SR cursor=0 level=0 cxsr=0
[drm] disabling dpio-tx-c-23
[drm] disabling dpio-tx-c-01
[drm] disabling dpio-tx-b-23
[drm] disabling dpio-tx-b-01
[drm] Calculated GuC WOPCM Region: [16KiB, 1008KiB)
[drm] clearing unused GTT space: [1000, 80000000]
[drm] Number of context specific w/a: 0
[drm] logical context support initialized
[drm] creating preallocated stolen object: stolen_offset=0xffffffff822eec70a,
gtt_offset=0xffffffff822eec78a, size=0xffffffff822eec80a
[drm] PCBR: 0x7eefa001
[drm] GPLL reference freq: 20833 kHz
[drm] DDR speed: 1333 MHz
[drm] max GPU freq: 750 MHz (219)
[drm] RPe GPU freq: 646 MHz (214)
[drm] RP1(Guar Freq) GPU freq: 312 MHz (198)
[drm] min GPU freq: 187 MHz (192)
[drm] GPLL enabled? yes
[drm] GPU status: 0x0000c6d0
[drm] pipe A not active or no fb, skipping
[drm] pipe B not active or no fb, skipping
[drm] no active fbs found, not using BIOS config
[drm]
[drm] [CONNECTOR:62:VGA-]
[drm] [CONNECTOR:62:VGA-] force=1
[drm] trigger hotplug detect cycle: adpa=0x80f40018
[drm] valleyview hotplug adpa=0x80f40018, result 0
[drm] CRT not detected via hotplug
[drm] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[drm] GMBUS [i915 gmbus vga] NAK on first message, retry
[drm] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[drm] drm: skipping non-existent adapter i915 gmbus vga
[drm] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[drm] enabling bit-banging on i915 gmbus vga. force bit now 1
[drm] disabling bit-banging on i915 gmbus vga. force bit now 0
[drm] CRT not detected via DDC:0x50 [no valid EDID found]
[drm] [CONNECTOR:62:VGA-] status updated from unknown to disconnected
[drm] [CONNECTOR:62:VGA-] disconnected
[drm] [CONNECTOR:65:DP-]
[drm] [CONNECTOR:65:DP-]
[drm] enabling dpio-tx-b-01
[drm] enabling dpio-tx-b-23
[drm] enabling dpio-tx-c-01
[drm] enabling dpio-tx-c-23
[drm] disabling dpio-tx-c-23
[drm] disabling dpio-tx-c-01
[drm] disabling dpio-tx-b-23
[drm] disabling dpio-tx-b-01
[drm] [CONNECTOR:65:DP-] status updated from unknown to disconnected
[drm] [CONNECTOR:65:DP-] disconnected
[drm] [CONNECTOR:69:HDMI-A-]
[drm] [CONNECTOR:69:HDMI-A-]
[drm] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[drm] GMBUS [i915 gmbus dpb] NAK on first message, retry
[drm] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[drm] drm: skipping non-existent adapter i915 gmbus dpb
[drm] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[drm] enabling bit-banging on i915 gmbus dpb. force bit now 1
[drm] disabling bit-banging on i915 gmbus dpb. force bit now 0
[drm] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[drm] GMBUS [i915 gmbus dpb] NAK on first message, retry
[drm] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[drm] DP dual mode HDMI ID: 0xffffffff822eea20E (err -6)
[drm] [CONNECTOR:69:HDMI-A-] status updated from unknown to disconnected
[drm] [CONNECTOR:69:HDMI-A-] disconnected
[drm] [CONNECTOR:73:DP-]
[drm] [CONNECTOR:73:DP-]
[drm] enabling dpio-tx-b-01
[drm] enabling dpio-tx-b-23
[drm] enabling dpio-tx-c-01
[drm] enabling dpio-tx-c-23
[drm] disabling dpio-tx-c-23
[drm] disabling dpio-tx-c-01
[drm] disabling dpio-tx-b-23
[drm] disabling dpio-tx-b-01
[drm] [CONNECTOR:73:DP-] status updated from unknown to disconnected
[drm] [CONNECTOR:73:DP-] disconnected
[drm] [CONNECTOR:75:HDMI-A-]
[drm] [CONNECTOR:75:HDMI-A-]
drm:pid0:connector_bad_edid *WARNING* HDMI-A-: EDID is invalid:
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[drm] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[drm] enabling bit-banging on i915 gmbus dpc. force bit now 1
drm:pid0:connector_bad_edid *WARNING* HDMI-A-: EDID is invalid:
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[drm] disabling bit-banging on i915 gmbus dpc. force bit now 0
[drm] DP dual mode HDMI ID: 0xffffffff822eea20E (err 0)
[drm] DP dual mode adaptor ID: 00 (err 0)
[drm] DP dual mode adaptor (type 1 DVI) detected (max TMDS clock: 165000 kHz)
[drm] [CONNECTOR:75:HDMI-A-] status updated from unknown to disconnected
[drm] [CONNECTOR:75:HDMI-A-] disconnected
[drm] No connectors reported connected with modes
[drm] connector 62 enabled? no
[drm] connector 65 enabled? no
[drm] connector 69 enabled? no
[drm] connector 73 enabled? no
[drm] connector 75 enabled? no
[drm] Not using firmware configuration
[drm] picking CRTCs for 8192x8192 config
[drm] Cannot find any crtc or sizes - going 1024x768
[drm] no BIOS fb, allocating a new one
[drm] allocated 1024x768 fb: 0x00080000
i915 device info: pciid=0x0f31 rev=0x0e platform=VALLEYVIEW gen=7
i915 device info: is_mobile: no
i915 device info: is_lp: yes
i915 device info: is_alpha_support: no
i915 device info: has_64bit_reloc: no
i915 device info: has_aliasing_ppgtt: yes
i915 device info: has_csr: no
i915 device info: has_ddi: no
i915 device info: has_dp_mst: no
i915 device info: has_reset_engine: no
i915 device info: has_fbc: no
i915 device info: has_fpga_dbg: no
i915 device info: has_full_ppgtt: yes
i915 device info: has_full_48bit_ppgtt: no
i915 device info: has_gmch_display: yes
i915 device info: has_guc: no
i915 device info: has_guc_ct: no
i915 device info: has_hotplug: yes
i915 device info: has_l3_dpf: no
i915 device info: has_llc: no
i915 device info: has_logical_ring_contexts: no
i915 device info: has_logical_ring_elsq: no
i915 device info: has_logical_ring_preemption: no
i915 device info: has_overlay: no
i915 device info: has_pooled_eu: no
i915 device info: has_psr: no
i915 device info: has_rc6: yes
i915 device info: has_rc6p: no
i915 device info: has_resource_streamer: no
i915 device info: has_runtime_pm: yes
i915 device info: has_snoop: yes
i915 device info: unfenced_needs_alignment: no
i915 device info: cursor_needs_physical: no
i915 device info: hws_needs_physical: no
i915 device info: overlay_needs_physical: no
i915 device info: supports_tv: no
i915 device info: has_ipc: no
i915 device info: slice total: 0, mask=0000
i915 device info: subslice total: 0
i915 device info: EU total: 0
i915 device info: EU per subslice: 0
i915 device info: has slice power gating: no
i915 device info: has subslice power gating: no
i915 device info: has EU power gating: no
i915 device info: CS timestamp frequency: 12500 kHz
inteldrm0: 1024x768, 32bpp
[drm] New cdclk calculated to be logical 200000 kHz, actual 200000 kHz
[drm] New voltage level calculated to be logical 0, actual 0
[drm] disabling pipe A
[drm] disabling pfit, current: 0x80000000
[drm] Changing CDCLK to 200000 kHz, VCO 2000000 kHz, ref 0 kHz, bypass 0 kHz,
voltage level 0
[drm] [ENCODER:63:CR]
[drm] [ENCODER:64:DP ]
[drm] [ENCODER:68:HDMI ]
[drm] [ENCODER:72:DP ]
[drm] [ENCODER:74:HDMI ]
[drm] [CONNECTOR:62:VGA-]
[drm] disabling dpio-common
[drm] disabling display
[drm] [CRTC:44:pipe ]
[drm] disabling always-on
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
bwfm0: config offset 0x0004, value 0x100006
bwfm0: config offset 0x004c, value 0x4008
bwfm0: config offset 0x0058, value 0x896805
bwfm0: config offset 0x005c, value 0xfee00000
bwfm0: config offset 0x0060, value 0x0000
bwfm0: config offset 0x0064, value 0x0072
bwfm0: config offset 0x00dc, value 0x10001
bwfm0: config offset 0x0228, value 0x0222
bwfm0: config offset 0x0248, value 0x0000
bwfm0: config offset 0x04e0, value 0x0017
bwfm0: config offset 0x04f4, value 0x0000
[drm] [CONNECTOR:62:VGA-] force=0
[drm] enabling always-on
[drm] enabling display
[drm] crt adpa set to 0xf40000
[drm] Something enabled VGA plane, disabling it
[drm] enabling dpio-common
[drm] trigger hotplug detect cycle: adpa=0xf40000
[drm] valleyview hotplug adpa=0xf40000, result 0
[drm] CRT not detected via hotplug
[drm] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[drm] GMBUS [i915 gmbus vga] NAK on first message, retry
[drm] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[drm] drm: skipping non-existent adapter i915 gmbus vga
[drm] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[drm] enabling bit-banging on i915 gmbus vga. force bit now 1
[drm] disabling bit-banging on i915 gmbus vga. force bit now 0
[drm] CRT not detected via DDC:0x50 [no valid EDID found]
[drm] disabling dpio-common
[drm] disabling display
[drm] disabling always-on
[drm] [CONNECTOR:62:VGA-] status updated from disconnected to disconnected
[drm] [CONNECTOR:65:DP-]
[drm] enabling always-on
[drm] enabling display
[drm] crt adpa set to 0xf40000
[drm] Something enabled VGA plane, disabling it
[drm] enabling dpio-tx-b-01
[drm] enabling dpio-tx-b-23
[drm] enabling dpio-tx-c-01
[drm] enabling dpio-tx-c-23
[drm] enabling dpio-common
[drm] disabling dpio-common
[drm] disabling dpio-tx-c-23
[drm] disabling dpio-tx-c-01
[drm] disabling dpio-tx-b-23
[drm] disabling dpio-tx-b-01
[drm] disabling display
[drm] disabling always-on
[drm] [CONNECTOR:65:DP-] status updated from disconnected to disconnected
[drm] [CONNECTOR:69:HDMI-A-]
[drm] enabling always-on
[drm] enabling display
[drm] crt adpa set to 0xf40000
[drm] Something enabled VGA plane, disabling it
[drm] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[drm] GMBUS [i915 gmbus dpb] NAK on first message, retry
[drm] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[drm] drm: skipping non-existent adapter i915 gmbus dpb
[drm] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[drm] enabling bit-banging on i915 gmbus dpb. force bit now 1
[drm] disabling bit-banging on i915 gmbus dpb. force bit now 0
[drm] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[drm] GMBUS [i915 gmbus dpb] NAK on first message, retry
[drm] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[drm] DP dual mode HDMI ID: 0xffff8000202b5e30E (err -6)
[drm] disabling display
[drm] disabling always-on
[drm] [CONNECTOR:69:HDMI-A-] status updated from disconnected to disconnected
[drm] [CONNECTOR:73:DP-]
[drm] enabling always-on
[drm] enabling display
[drm] crt adpa set to 0xf40000
[drm] Something enabled VGA plane, disabling it
[drm] enabling dpio-tx-b-01
[drm] enabling dpio-tx-b-23
[drm] enabling dpio-tx-c-01
[drm] enabling dpio-tx-c-23
[drm] enabling dpio-common
[drm] disabling dpio-common
[drm] disabling dpio-tx-c-23
[drm] disabling dpio-tx-c-01
[drm] disabling dpio-tx-b-23
[drm] disabling dpio-tx-b-01
[drm] disabling display
[drm] disabling always-on
[drm] [CONNECTOR:73:DP-] status updated from disconnected to disconnected
[drm] [CONNECTOR:75:HDMI-A-]
[drm] enabling always-on
[drm] enabling display
[drm] crt adpa set to 0xf40000
[drm] Something enabled VGA plane, disabling it
drm:pid40449:connector_bad_edid *WARNING* HDMI-A-: EDID is invalid:
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[drm] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[drm] enabling bit-banging on i915 gmbus dpc. force bit now 1
drm:pid40449:connector_bad_edid *WARNING* HDMI-A-: EDID is invalid:
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[drm] disabling bit-banging on i915 gmbus dpc. force bit now 0
[drm] DP dual mode HDMI ID: 0xffff8000202b5e30E (err 0)
[drm] DP dual mode adaptor ID: 00 (err 0)
[drm] DP dual mode adaptor (type 1 DVI) detected (max TMDS clock: 165000 kHz)
[drm] disabling display
[drm] disabling always-on
[drm] [CONNECTOR:75:HDMI-A-] status updated from disconnected to disconnected
[drm] [CONNECTOR:62:VGA-] force=0
[drm] enabling always-on
[drm] enabling display
[drm] crt adpa set to 0xf40000
[drm] Something enabled VGA plane, disabling it
[drm] enabling dpio-common
[drm] trigger hotplug detect cycle: adpa=0xf40000
[drm] valleyview hotplug adpa=0xf40000, result 0
[drm] CRT not detected via hotplug
[drm] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[drm] GMBUS [i915 gmbus vga] NAK on first message, retry
[drm] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[drm] drm: skipping non-existent adapter i915 gmbus vga
[drm] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[drm] enabling bit-banging on i915 gmbus vga. force bit now 1
[drm] disabling bit-banging on i915 gmbus vga. force bit now 0
[drm] CRT not detected via DDC:0x50 [no valid EDID found]
[drm] disabling dpio-common
[drm] disabling display
[drm] disabling always-on
[drm] [CONNECTOR:62:VGA-] status updated from disconnected to disconnected
[drm] [CONNECTOR:65:DP-]
[drm] enabling always-on
[drm] enabling display
[drm] crt adpa set to 0xf40000
[drm] Something enabled VGA plane, disabling it
[drm] enabling dpio-tx-b-01
[drm] enabling dpio-tx-b-23
[drm] enabling dpio-tx-c-01
[drm] enabling dpio-tx-c-23
[drm] enabling dpio-common
[drm] disabling dpio-common
[drm] disabling dpio-tx-c-23
[drm] disabling dpio-tx-c-01
[drm] disabling dpio-tx-b-23
[drm] disabling dpio-tx-b-01
[drm] disabling display
[drm] disabling always-on
[drm] [CONNECTOR:65:DP-] status updated from disconnected to disconnected
[drm] [CONNECTOR:69:HDMI-A-]
[drm] enabling always-on
[drm] enabling display
[drm] crt adpa set to 0xf40000
[drm] Something enabled VGA plane, disabling it
[drm] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[drm] GMBUS [i915 gmbus dpb] NAK on first message, retry
[drm] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[drm] drm: skipping non-existent adapter i915 gmbus dpb
[drm] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[drm] enabling bit-banging on i915 gmbus dpb. force bit now 1
[drm] disabling bit-banging on i915 gmbus dpb. force bit now 0
[drm] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[drm] GMBUS [i915 gmbus dpb] NAK on first message, retry
[drm] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[drm] DP dual mode HDMI ID: 0xffff8000202b5e30E (err -6)
[drm] disabling display
[drm] disabling always-on
[drm] [CONNECTOR:69:HDMI-A-] status updated from disconnected to disconnected
[drm] [CONNECTOR:73:DP-]
[drm] enabling always-on
[drm] enabling display
[drm] crt adpa set to 0xf40000
[drm] Something enabled VGA plane, disabling it
[drm] enabling dpio-tx-b-01
[drm] enabling dpio-tx-b-23
[drm] enabling dpio-tx-c-01
[drm] enabling dpio-tx-c-23
[drm] enabling dpio-common
[drm] disabling dpio-common
[drm] disabling dpio-tx-c-23
[drm] disabling dpio-tx-c-01
[drm] disabling dpio-tx-b-23
[drm] disabling dpio-tx-b-01
[drm] disabling display
[drm] disabling always-on
[drm] [CONNECTOR:73:DP-] status updated from disconnected to disconnected
[drm] [CONNECTOR:75:HDMI-A-]
[drm] enabling always-on
[drm] enabling display
[drm] crt adpa set to 0xf40000
[drm] Something enabled VGA plane, disabling it
drm:pid40449:connector_bad_edid *WARNING* HDMI-A-: EDID is invalid:
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[drm] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[drm] enabling bit-banging on i915 gmbus dpc. force bit now 1
drm:pid40449:connector_bad_edid *WARNING* HDMI-A-: EDID is invalid:
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[drm] disabling bit-banging on i915 gmbus dpc. force bit now 0
[drm] DP dual mode HDMI ID: 0xffff8000202b5e30E (err 0)
[drm] DP dual mode adaptor ID: 00 (err 0)
[drm] DP dual mode adaptor (type 1 DVI) detected (max TMDS clock: 165000 kHz)
[drm] disabling display
[drm] disabling always-on
[drm] [CONNECTOR:75:HDMI-A-] status updated from disconnected to disconnected
[drm] [CONNECTOR:62:VGA-] force=0
[drm] enabling always-on
[drm] enabling display
[drm] crt adpa set to 0xf40000
[drm] Something enabled VGA plane, disabling it
[drm] enabling dpio-common
[drm] trigger hotplug detect cycle: adpa=0xf40000
[drm] valleyview hotplug adpa=0xf40000, result 0
[drm] CRT not detected via hotplug
[drm] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[drm] GMBUS [i915 gmbus vga] NAK on first message, retry
[drm] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[drm] drm: skipping non-existent adapter i915 gmbus vga
[drm] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[drm] enabling bit-banging on i915 gmbus vga. force bit now 1
[drm] disabling bit-banging on i915 gmbus vga. force bit now 0
[drm] CRT not detected via DDC:0x50 [no valid EDID found]
[drm] disabling dpio-common
[drm] disabling display
[drm] disabling always-on
[drm] [CONNECTOR:62:VGA-] status updated from disconnected to disconnected
[drm] [CONNECTOR:65:DP-]
[drm] enabling always-on
[drm] enabling display
[drm] crt adpa set to 0xf40000
[drm] Something enabled VGA plane, disabling it
[drm] enabling dpio-tx-b-01
[drm] enabling dpio-tx-b-23
[drm] enabling dpio-tx-c-01
[drm] enabling dpio-tx-c-23
[drm] enabling dpio-common
[drm] disabling dpio-common
[drm] disabling dpio-tx-c-23
[drm] disabling dpio-tx-c-01
[drm] disabling dpio-tx-b-23
[drm] disabling dpio-tx-b-01
[drm] disabling display
[drm] disabling always-on
[drm] [CONNECTOR:65:DP-] status updated from disconnected to disconnected
[drm] [CONNECTOR:69:HDMI-A-]
[drm] enabling always-on
[drm] enabling display
[drm] crt adpa set to 0xf40000
[drm] Something enabled VGA plane, disabling it
[drm] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[drm] GMBUS [i915 gmbus dpb] NAK on first message, retry
[drm] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[drm] drm: skipping non-existent adapter i915 gmbus dpb
[drm] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[drm] enabling bit-banging on i915 gmbus dpb. force bit now 1
[drm] disabling bit-banging on i915 gmbus dpb. force bit now 0
[drm] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[drm] GMBUS [i915 gmbus dpb] NAK on first message, retry
[drm] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[drm] DP dual mode HDMI ID: 0xffff8000202c8000E (err -6)
[drm] disabling display
[drm] disabling always-on
[drm] [CONNECTOR:69:HDMI-A-] status updated from disconnected to disconnected
[drm] [CONNECTOR:73:DP-]
[drm] enabling always-on
[drm] enabling display
[drm] crt adpa set to 0xf40000
[drm] Something enabled VGA plane, disabling it
[drm] enabling dpio-tx-b-01
[drm] enabling dpio-tx-b-23
[drm] enabling dpio-tx-c-01
[drm] enabling dpio-tx-c-23
[drm] enabling dpio-common
[drm] disabling dpio-common
[drm] disabling dpio-tx-c-23
[drm] disabling dpio-tx-c-01
[drm] disabling dpio-tx-b-23
[drm] disabling dpio-tx-b-01
[drm] disabling display
[drm] disabling always-on
[drm] [CONNECTOR:73:DP-] status updated from disconnected to disconnected
[drm] [CONNECTOR:75:HDMI-A-]
[drm] enabling always-on
[drm] enabling display
[drm] crt adpa set to 0xf40000
[drm] Something enabled VGA plane, disabling it
drm:pid201:connector_bad_edid *WARNING* HDMI-A-: EDID is invalid:
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[drm] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[drm] enabling bit-banging on i915 gmbus dpc. force bit now 1
drm:pid201:connector_bad_edid *WARNING* HDMI-A-: EDID is invalid:
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[drm] disabling bit-banging on i915 gmbus dpc. force bit now 0
[drm] DP dual mode HDMI ID: 0xffff8000202c8000E (err 0)
[drm] DP dual mode adaptor ID: 00 (err 0)
[drm] DP dual mode adaptor (type 1 DVI) detected (max TMDS clock: 165000 kHz)
[drm] disabling display
[drm] disabling always-on
[drm] [CONNECTOR:75:HDMI-A-] status updated from disconnected to disconnected
[drm] [CONNECTOR:62:VGA-] force=0
[drm] enabling always-on
[drm] enabling display
[drm] crt adpa set to 0xf40000
[drm] Something enabled VGA plane, disabling it
[drm] enabling dpio-common
[drm] trigger hotplug detect cycle: adpa=0xf40000
[drm] valleyview hotplug adpa=0xf40000, result 0
[drm] CRT not detected via hotplug
[drm] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[drm] GMBUS [i915 gmbus vga] NAK on first message, retry
[drm] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[drm] drm: skipping non-existent adapter i915 gmbus vga
[drm] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[drm] enabling bit-banging on i915 gmbus vga. force bit now 1
[drm] disabling bit-banging on i915 gmbus vga. force bit now 0
[drm] CRT not detected via DDC:0x50 [no valid EDID found]
[drm] disabling dpio-common
[drm] disabling display
[drm] disabling always-on
[drm] [CONNECTOR:62:VGA-] status updated from disconnected to disconnected
[drm] [CONNECTOR:65:DP-]
[drm] enabling always-on
[drm] enabling display
[drm] crt adpa set to 0xf40000
[drm] Something enabled VGA plane, disabling it
[drm] enabling dpio-tx-b-01
[drm] enabling dpio-tx-b-23
[drm] enabling dpio-tx-c-01
[drm] enabling dpio-tx-c-23
[drm] enabling dpio-common
[drm] disabling dpio-common
[drm] disabling dpio-tx-c-23
[drm] disabling dpio-tx-c-01
[drm] disabling dpio-tx-b-23
[drm] disabling dpio-tx-b-01
[drm] disabling display
[drm] disabling always-on
[drm] [CONNECTOR:65:DP-] status updated from disconnected to disconnected
[drm] [CONNECTOR:69:HDMI-A-]
[drm] enabling always-on
[drm] enabling display
[drm] crt adpa set to 0xf40000
[drm] Something enabled VGA plane, disabling it
[drm] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[drm] GMBUS [i915 gmbus dpb] NAK on first message, retry
[drm] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[drm] drm: skipping non-existent adapter i915 gmbus dpb
[drm] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[drm] enabling bit-banging on i915 gmbus dpb. force bit now 1
[drm] disabling bit-banging on i915 gmbus dpb. force bit now 0
[drm] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[drm] GMBUS [i915 gmbus dpb] NAK on first message, retry
[drm] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[drm] DP dual mode HDMI ID: 0xffff8000202b5e30E (err -6)
[drm] disabling display
[drm] disabling always-on
[drm] [CONNECTOR:69:HDMI-A-] status updated from disconnected to disconnected
[drm] [CONNECTOR:73:DP-]
[drm] enabling always-on
[drm] enabling display
[drm] crt adpa set to 0xf40000
[drm] Something enabled VGA plane, disabling it
[drm] enabling dpio-tx-b-01
[drm] enabling dpio-tx-b-23
[drm] enabling dpio-tx-c-01
[drm] enabling dpio-tx-c-23
[drm] enabling dpio-common
[drm] disabling dpio-common
[drm] disabling dpio-tx-c-23
[drm] disabling dpio-tx-c-01
[drm] disabling dpio-tx-b-23
[drm] disabling dpio-tx-b-01
[drm] disabling display
[drm] disabling always-on
[drm] [CONNECTOR:73:DP-] status updated from disconnected to disconnected
[drm] [CONNECTOR:75:HDMI-A-]
[drm] enabling always-on
[drm] enabling display
[drm] crt adpa set to 0xf40000
[drm] Something enabled VGA plane, disabling it
drm:pid40449:connector_bad_edid *WARNING* HDMI-A-: EDID is invalid:
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[drm] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[drm] enabling bit-banging on i915 gmbus dpc. force bit now 1
drm:pid40449:connector_bad_edid *WARNING* HDMI-A-: EDID is invalid:
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[drm] disabling bit-banging on i915 gmbus dpc. force bit now 0
[drm] DP dual mode HDMI ID: 0xffff8000202b5e30E (err 0)
[drm] DP dual mode adaptor ID: 00 (err 0)
[drm] DP dual mode adaptor (type 1 DVI) detected (max TMDS clock: 165000 kHz)
[drm] disabling display
[drm] disabling always-on
[drm] [CONNECTOR:75:HDMI-A-] status updated from disconnected to disconnected
[drm] [CONNECTOR:62:VGA-] force=0
[drm] enabling always-on
[drm] enabling display
[drm] crt adpa set to 0xf40000
[drm] Something enabled VGA plane, disabling it
[drm] enabling dpio-common
[drm] trigger hotplug detect cycle: adpa=0xf40000
[drm] valleyview hotplug adpa=0xf40000, result 0
[drm] CRT not detected via hotplug
[drm] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[drm] GMBUS [i915 gmbus vga] NAK on first message, retry
[drm] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[drm] drm: skipping non-existent adapter i915 gmbus vga
[drm] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[drm] enabling bit-banging on i915 gmbus vga. force bit now 1
[drm] disabling bit-banging on i915 gmbus vga. force bit now 0
[drm] CRT not detected via DDC:0x50 [no valid EDID found]
[drm] disabling dpio-common
[drm] disabling display
[drm] disabling always-on
[drm] [CONNECTOR:62:VGA-] status updated from disconnected to disconnected
[drm] [CONNECTOR:65:DP-]
[drm] enabling always-on
[drm] enabling display
[drm] crt adpa set to 0xf40000
[drm] Something enabled VGA plane, disabling it
[drm] enabling dpio-tx-b-01
[drm] enabling dpio-tx-b-23
[drm] enabling dpio-tx-c-01
[drm] enabling dpio-tx-c-23
[drm] enabling dpio-common
[drm] disabling dpio-common
[drm] disabling dpio-tx-c-23
[drm] disabling dpio-tx-c-01
[drm] disabling dpio-tx-b-23
[drm] disabling dpio-tx-b-01
[drm] disabling display
[drm] disabling always-on
[drm] [CONNECTOR:65:DP-] status updated from disconnected to disconnected
[drm] [CONNECTOR:69:HDMI-A-]
[drm] enabling always-on
[drm] enabling display
[drm] crt adpa set to 0xf40000
[drm] Something enabled VGA plane, disabling it
[drm] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[drm] GMBUS [i915 gmbus dpb] NAK on first message, retry
[drm] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
[drm] drm: skipping non-existent adapter i915 gmbus dpb
[drm] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[drm] enabling bit-banging on i915 gmbus dpb. force bit now 1
[drm] disabling bit-banging on i915 gmbus dpb. force bit now 0
[drm] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[drm] GMBUS [i915 gmbus dpb] NAK on first message, retry
[drm] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
[drm] DP dual mode HDMI ID: 0xffff8000202c2a90E (err -6)
[drm] disabling display
[drm] disabling always-on
[drm] [CONNECTOR:69:HDMI-A-] status updated from disconnected to disconnected
[drm] [CONNECTOR:73:DP-]
[drm] enabling always-on
[drm] enabling display
[drm] crt adpa set to 0xf40000
[drm] Something enabled VGA plane, disabling it
[drm] enabling dpio-tx-b-01
[drm] enabling dpio-tx-b-23
[drm] enabling dpio-tx-c-01
[drm] enabling dpio-tx-c-23
[drm] enabling dpio-common
[drm] disabling dpio-common
[drm] disabling dpio-tx-c-23
[drm] disabling dpio-tx-c-01
[drm] disabling dpio-tx-b-23
[drm] disabling dpio-tx-b-01
[drm] disabling display
[drm] disabling always-on
[drm] [CONNECTOR:73:DP-] status updated from disconnected to disconnected
[drm] [CONNECTOR:75:HDMI-A-]
[drm] enabling always-on
[drm] enabling display
[drm] crt adpa set to 0xf40000
[drm] Something enabled VGA plane, disabling it
drm:pid63523:connector_bad_edid *WARNING* HDMI-A-: EDID is invalid:
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[drm] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
[drm] enabling bit-banging on i915 gmbus dpc. force bit now 1
drm:pid63523:connector_bad_edid *WARNING* HDMI-A-: EDID is invalid:
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[00] ZERO 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[drm] disabling bit-banging on i915 gmbus dpc. force bit now 0
[drm] DP dual mode HDMI ID: 0xffff8000202c2a90E (err 0)
[drm] DP dual mode adaptor ID: 00 (err 0)
[drm] DP dual mode adaptor (type 1 DVI) detected (max TMDS clock: 165000 kHz)
[drm] disabling display
[drm] disabling always-on
[drm] [CONNECTOR:75:HDMI-A-] status updated from disconnected to disconnected
[drm] [CONNECTOR:62:VGA-] force=0
[drm] enabling always-on
[drm] enabling display
[drm] crt adpa set to 0xf40000
[drm] Something enabled VGA plane, disabling it
[drm] enabling dpio-common
[drm] trigger hotplug detect cycle: adpa=0xf40000
[drm] valleyview hotplug adpa=0xf40000, result 0
[drm] CRT not detected via hotplug
[drm] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[drm] GMBUS [i915 gmbus vga] NAK on first message, retry
[drm] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
[drm] drm: skipping non-existent adapter i915 gmbus vga
[drm] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[drm] enabling bit-banging on i915 gmbus vga. force bit now 1
[drm] disabling bit-banging on i915 gmbus vga. force bit now 0
[drm] CRT not detected via DDC:0x50 [no valid EDID found]
[drm] disabling dpio-common
[drm] disabling display
[drm] disabling always-on
[drm] [CONNECTOR:62:VGA-] status updated from disconnected to disconnected
[drm] [CONNECTOR:65:DP-]
[drm] enabling always-on
[drm] enabling display
[drm] crt adpa set to 0xf40000
[drm] Something enabled VGA plane, disabling it
[drm] enabling dpio-tx-b-01
[drm] enabling dpio-tx-b-23
[drm] enabling dpio-tx-c-01
[drm] enabling dpio-tx-c-23
[drm] enabling dpio-common
signature.asc
Description: PGP signature
