On 2020/04/20 23:43, Mark Kettenis wrote: > > bwfm(4) is working for me, but when in device tree mode (wherever the > > uSD is routed) bse(4) is flaky - ethernet link doesn't come up at boot, > > if I leave it for a little while with a ping running to the bse from > > another machine I get the occasional packet through but that's all. > > Do you see that too? > > I don't see that, but I suspect this is because the device tree has > phy-mode set to "rgmii" instead of "rgmii-rxid". > > A workaround is to take the bcm2711-rpi-4-b.dtb, fixup4.dat and > start4.elf files from > > https://github.com/raspberrypi/firmware/tree/next/boot > > and put them on the MS-DOS partition of your uSD card.
Thanks, confirmed it's working for me with the newer files.