On Wed, Dec 09, 2020 at 09:11:35AM +0100, Jan Klemkow wrote:
> On Tue, Dec 08, 2020 at 09:03:53PM -0300, Daniel Bolgheroni wrote:
> > I have a FT232H variant (marked FT232HQ, 0403:6014) which works with
> > uftdi(4).
> >
> > Still related to uftdi(4), sys/dev/usb/ftdi.c has a comment saying uftdi(4)
> > does not support multiple serial ports because ucom(4), but I'm able to use
> > both ucom(4) in parallel from the same FT2232H (dual).
>
> Hi Daniel,
>
> How does your device attach? Could you send with your device attached?
Hi Jan,
In the case of FT232H(Q), before the patch adding it to usbdevs, it was
attaching as ugen(4). After the patch:
uftdi0 at uhub0 port 1 configuration 1 interface 0 "FTDI Single RS232-HS" rev
2.00/9.00 addr 3
ucom0 at uftdi0 portno 1
In the case of FT2232H (dual):
uftdi0 at uhub0 port 2 configuration 1 interface 0 "FTDI Dual RS232-HS" rev
2.00/7.00 addr 3
ucom0 at uftdi0 portno 1
uftdi1 at uhub0 port 2 configuration 1 interface 1 "FTDI Dual RS232-HS" rev
2.00/7.00 addr 3
ucom1 at uftdi1 portno 2
The full dmesg is below. Custom kernel, but the only change is the IDs for the
device I mentioned before.
Thank you.
full dmesg:
OpenBSD 6.8-current (GENERIC.MP) #9: Tue Dec 8 10:57:52 -03 2020
dbolgheroni@a320:/home/dbolgheroni/openbsd/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8469942272 (8077MB)
avail mem = 8197922816 (7818MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xccbfd000 (64 entries)
bios0: vendor LENOVO version "N10ET54W (1.33 )" date 09/18/2018
bios0: LENOVO 20CL006VBR
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC ASF! HPET ECDT APIC MCFG SSDT SSDT SSDT SSDT SSDT
SSDT SSDT SSDT SSDT PCCT SSDT UEFI MSDM BATB FPDT UEFI BGRT DMAR
acpi0: wakeup devices LID_(S4) SLPB(S3) IGBE(S4) EXP2(S4) XHCI(S3) EHC1(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpiec0 at acpi0
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz, 2494.57 MHz, 06-3d-04
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz, 2494.25 MHz, 06-3d-04
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,RDSEED,ADX,SMAP,PT,SRBDS_CTRL,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 2 (EXP1)
acpiprt3 at acpi0: bus 3 (EXP2)
acpiprt4 at acpi0: bus -1 (EXP3)
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
acpibat0 at acpi0: BAT0 model "45N1773" serial 1004 type LION oem "SANYO"
acpibat1 at acpi0: BAT1 model "45N1775" serial 632 type LION oem "SANYO"
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0: version 1.0
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT340F" at acpi0 not configured
acpicpu0 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@233 mwait.1@0x40), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PUBS, resource for XHCI, EHC1
acpipwrres1 at acpi0: NVP3, resource for PEG_
acpipwrres2 at acpi0: NVP2, resource for PEG_
acpitz0 at acpi0: critical temperature is 128 degC
acpivideo0 at acpi0: VID_
acpivout0 at acpivideo0: LCD0
acpivideo1 at acpi0: VID_
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 2494 MHz: speeds: 2601, 2600, 2500, 2300, 2100, 2000,
1800, 1700, 1500, 1400, 1200, 1100, 900, 800, 600, 500 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 5G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 5500" rev 0x09
drm0 at inteldrm0
inteldrm0: msi, BROADWELL, gen 8
azalia0 at pci0 dev 3 function 0 "Intel Core 5G HD Audio" rev 0x09: msi
azalia0: No codecs found
xhci0 at pci0 dev 20 function 0 "Intel 9 Series xHCI" rev 0x03: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
"Intel 9 Series MEI" rev 0x03 at pci0 dev 22 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel I218-LM" rev 0x03: msi, address
68:f7:28:f9:ce:6a
azalia1 at pci0 dev 27 function 0 "Intel 9 Series HD Audio" rev 0x03: msi
azalia1: codecs: Realtek ALC292
audio0 at azalia1
ppb0 at pci0 dev 28 function 0 "Intel 9 Series PCIE" rev 0xe3: msi
pci1 at ppb0 bus 2
rtsx0 at pci1 dev 0 function 0 "Realtek RTS5227 Card Reader" rev 0x01: msi
sdmmc0 at rtsx0: 4-bit, dma
ppb1 at pci0 dev 28 function 1 "Intel 9 Series PCIE" rev 0xe3: msi
pci2 at ppb1 bus 3
iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 7265" rev 0x59, msi
ehci0 at pci0 dev 29 function 0 "Intel 9 Series USB" rev 0x03: apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
pcib0 at pci0 dev 31 function 0 "Intel 9 Series LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 9 Series AHCI" rev 0x03: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG MZ7TD256, DXT0> naa.5002538500000000
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 9 Series SMBus" rev 0x03: apic 2 int 18
iic0 at ichiic0
pchtemp0 at pci0 dev 31 function 6 "Intel 9 Series Thermal" rev 0x03
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x943300 0x330340 0xf002a3
0x12e800
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
uftdi0 at uhub0 port 1 configuration 1 interface 0 "FTDI Single RS232-HS" rev
2.00/9.00 addr 2
ucom0 at uftdi0 portno 1
uvideo0 at uhub0 port 8 configuration 1 interface 0 "SunplusIT Inc Integrated
Camera" rev 2.00/0.18 addr 3
video0 at uvideo0
uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.03 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd1: 244197MB, 512 bytes/sector, 500116577 sectors
root on sd1a (6a1a8d378f82a753.a) swap on sd1b dump on sd1b
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
iwm0: hw rev 0x210, fw ver 17.3216344376.0, address dc:53:60:0c:83:2a
ucom0 detached
uftdi0 detached
uftdi0 at uhub0 port 1 configuration 1 interface 0 "FTDI Single RS232-HS" rev
2.00/9.00 addr 2
ucom0 at uftdi0 portno 1
ucom0 detached
uftdi0 detached
uftdi0 at uhub0 port 1 configuration 1 interface 0 "FTDI Single RS232-HS" rev
2.00/9.00 addr 2
ucom0 at uftdi0 portno 1
ucom0 detached
uftdi0 detached
uftdi0 at uhub0 port 1 configuration 1 interface 0 "FTDI Single RS232-HS" rev
2.00/9.00 addr 2
ucom0 at uftdi0 portno 1
ucom0 detached
uftdi0 detached
uslcom0 at uhub0 port 1 configuration 1 interface 0 "Silicon Labs CP2102 USB to
UART Bridge Controller" rev 1.10/1.00 addr 2
ucom0 at uslcom0 portno 0
uftdi0 at uhub0 port 2 configuration 1 interface 0 "FTDI Single RS232-HS" rev
2.00/9.00 addr 4
ucom1 at uftdi0 portno 1
ucom0 detached
uslcom0 detached
ucom1 detached
uftdi0 detached
uftdi0 at uhub0 port 2 configuration 1 interface 0 "FTDI Single RS232-HS" rev
2.00/9.00 addr 2
ucom0 at uftdi0 portno 1
uftdi1 at uhub0 port 1 configuration 1 interface 0 "FTDI Single RS232-HS" rev
2.00/9.00 addr 4
ucom1 at uftdi1 portno 1
ucom1 detached
uftdi1 detached
uftdi1 at uhub0 port 1 configuration 1 interface 0 "FTDI Single RS232-HS" rev
2.00/9.00 addr 4
ucom1 at uftdi1 portno 1
ucom1 detached
uftdi1 detached
ucom0 detached
uftdi0 detached
uftdi0 at uhub0 port 2 configuration 1 interface 0 "FTDI Dual RS232-HS" rev
2.00/7.00 addr 2
ucom0 at uftdi0 portno 1
uftdi1 at uhub0 port 2 configuration 1 interface 1 "FTDI Dual RS232-HS" rev
2.00/7.00 addr 2
ucom1 at uftdi1 portno 2
ucom0 detached
uftdi0 detached
ucom1 detached
uftdi1 detached
uftdi0 at uhub0 port 2 configuration 1 interface 0 "FTDI Dual RS232-HS" rev
2.00/7.00 addr 2
ucom0 at uftdi0 portno 1
uftdi1 at uhub0 port 2 configuration 1 interface 1 "FTDI Dual RS232-HS" rev
2.00/7.00 addr 2
ucom1 at uftdi1 portno 2
ucom0 detached
uftdi0 detached
ucom1 detached
uftdi1 detached
uftdi0 at uhub0 port 2 configuration 1 interface 0 "FTDI Dual RS232-HS" rev
2.00/7.00 addr 2
ucom0 at uftdi0 portno 1
uftdi1 at uhub0 port 2 configuration 1 interface 1 "FTDI Dual RS232-HS" rev
2.00/7.00 addr 2
ucom1 at uftdi1 portno 2
uslcom0 at uhub0 port 1 configuration 1 interface 0 "Silicon Labs CP2102 USB to
UART Bridge Controller" rev 1.10/1.00 addr 4
ucom2 at uslcom0 portno 0
ucom0 detached
uftdi0 detached
ucom1 detached
uftdi1 detached
uhub0: device problem, disabling port 2
uftdi0 at uhub0 port 2 configuration 1 interface 0 "FTDI Dual RS232-HS" rev
2.00/7.00 addr 2
ucom0 at uftdi0 portno 1
uftdi1 at uhub0 port 2 configuration 1 interface 1 "FTDI Dual RS232-HS" rev
2.00/7.00 addr 2
ucom1 at uftdi1 portno 2
ucom0 detached
uftdi0 detached
ucom1 detached
uftdi1 detached
ucom2 detached
uslcom0 detached
uslcom0 at uhub0 port 1 configuration 1 interface 0 "Silicon Labs CP2102 USB to
UART Bridge Controller" rev 1.10/1.00 addr 2
ucom0 at uslcom0 portno 0
ucom0 detached
uslcom0 detached
uhub3 at uhub0 port 1 configuration 1 interface 0 "Generic 4-Port USB 2.0 Hub"
rev 2.10/1.17 addr 2
uhub4 at uhub3 port 1 configuration 1 interface 0 "Generic 4-Port USB 2.0 Hub"
rev 2.10/1.17 addr 4
uhidev0 at uhub4 port 1 configuration 1 interface 0 "Dell Dell KB216 Wired
Keyboard" rev 1.10/1.08 addr 5
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub4 port 1 configuration 1 interface 1 "Dell Dell KB216 Wired
Keyboard" rev 1.10/1.08 addr 5
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=3, output=0, feature=0
uhidev2 at uhub4 port 2 configuration 1 interface 0 "PixArt Lenovo USB Optical
Mouse" rev 2.00/1.00 addr 6
uhidev2: iclass 3/1
ums0 at uhidev2: 3 buttons, Z dir
wsmouse2 at ums0 mux 0
uftdi0 at uhub4 port 3 configuration 1 interface 0 "FTDI TTL232R-3V3" rev
2.00/6.00 addr 7
ucom0 at uftdi0 portno 1
ugen0 at uhub4 port 4 "Kvaser AB Kvaser Leaf Light v2" rev 2.00/0.01 addr 8
umass0 at uhub3 port 4 configuration 1 interface 0 "Generic Mass Storage" rev
2.00/1.12 addr 9
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 2 targets, initiator 0
sd2 at scsibus4 targ 1 lun 0: <Generic, Flash Disk, 8.07> removable
sd2: 3900MB, 512 bytes/sector, 7987200 sectors
uhub5 at uhub0 port 12 configuration 1 interface 0 "Generic 4-Port USB 3.0 Hub"
rev 3.00/1.17 addr 10
uhub6 at uhub5 port 1 configuration 1 interface 0 "Generic 4-Port USB 3.0 Hub"
rev 3.00/1.17 addr 11
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev0 detached
uhid0 detached
uhid1 detached
uhidev1 detached
wsmouse2 detached
ums0 detached
uhidev2 detached
ucom0 detached
uftdi0 detached
ugen0 detached
uhub4 detached
sd2 detached
scsibus4 detached
umass0 detached
uhub3 detached
video0 detached
uvideo0 detached
uhub6 detached
uhub5 detached
uhub0 detached
uhub2 detached
uhub1 detached
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00
addr 1
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
uvideo0 at uhub0 port 8 configuration 1 interface 0 "SunplusIT Inc Integrated
Camera" rev 2.00/0.18 addr 2
video0 at uvideo0
uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev
2.00/0.03 addr 2
uftdi0 at uhub0 port 2 configuration 1 interface 0 "FTDI Dual RS232-HS" rev
2.00/7.00 addr 3
ucom0 at uftdi0 portno 1
uftdi1 at uhub0 port 2 configuration 1 interface 1 "FTDI Dual RS232-HS" rev
2.00/7.00 addr 3
ucom1 at uftdi1 portno 2
ucom0 detached
uftdi0 detached
ucom1 detached
uftdi1 detached
uftdi0 at uhub0 port 2 configuration 1 interface 0 "FTDI Dual RS232-HS" rev
2.00/7.00 addr 3
ucom0 at uftdi0 portno 1
uftdi1 at uhub0 port 2 configuration 1 interface 1 "FTDI Dual RS232-HS" rev
2.00/7.00 addr 3
ucom1 at uftdi1 portno 2
ucom0 detached
uftdi0 detached
ucom1 detached
uftdi1 detached
uftdi0 at uhub0 port 1 configuration 1 interface 0 "FTDI Single RS232-HS" rev
2.00/9.00 addr 3
ucom0 at uftdi0 portno 1
--
db
