Is there anyone out there using an apu2e4? I just received an APU2E4 / GX-412TC 4GB
https://www.pcengines.ch/apu2e4.htm I can't boot any recent kernel on it, not through USB nor through PXEBOOT. I tried amd64/i386, snapshot, 6.8, 6.6, and all cause the apu to reboot after the entry point message. E.g.: net0: 00:0d:b9:5a:13:00 using i210-2 on PCI01:00.0 (open) [Link:up, TX:0 TXE:0 RX:0 RXE:0] Configuring (net0 00:0d:b9:5a:13:00)...... ok net0: 192.168.1.26/255.255.255.0 gw 192.168.1.1 Next server: 192.168.1.1 Filename: pxeboot tftp://192.168.1.1/pxeboot... ok pxeboot : 101284 bytes [PXE-NBP] probing: pc0 com0 com1 pxe![2.1] mem[624K 62M 3518M 116K 496M a20=on] disk: net: mac 00:0d:b9:5a:13:00, ip 192.168.1.26, server 192.168.1.1 >> OpenBSD/amd64 PXEBOOT 3.53 boot> booting tftp:/bsd: 3814093+1586176+3882456+0+704512=0x988360 entry point at 0xffffffff81001000 <apu reboots> Funnily on the mSATA disk which I had spare, an old 5.3-i386 was still installed which boots fine.
