On Sun, Mar 14, 2021 at 12:13:20AM +0000, Thomas Windisch wrote:
> On Sat, Mar 13, 2021 at 11:34:29AM +0000, Stuart Henderson wrote:
> > Nothing changed in umb(4) since 6.8-release. The change last year was
> > between 6.7 and 6.8 ("IPv6 is no longer on by default. It must be
> > enabled with "inet6 eui64").
>
> It seems that the issue I had was not related to OpenBSD but due to
> bad configuration of the modem. What I failed to mention in my inital
> email was that there were two modems (same model and firmware) on two
> machines: one running -current, the other 6.8-release. I wrongfully
> assumed that it had to do something with the OS. Apparently only one of
> the modems had a setting set for inet4 AND/OR inet6 that is limiting
> or not overwritten by umb or via MBIM. Both should have had the same
> factory settings, colour me surprised. After issuing an appropriate
> AT-command I can now also get IPv6 on my -current machine.
>
Could you share dmesg, modem model and AT commands you used to configure
it for IPv6?
--
Regards,
Mikolaj
