On Sat, Feb 05, 2022 at 05:22:50PM +0100, Jan Stary wrote: > On Feb 02 00:04:37, alexander.bl...@gmx.net wrote: > > On Tue, Feb 01, 2022 at 08:00:36AM +0100, Otto Moerbeek wrote: > > > > Are you running with any malloc flags? > > > > > > This bug report enabled me to find a bug that would pop up if G mode > > > is enabled. > > > > > > New diff below. New tests appreciated. > > > Passed a make build on macppc (Mac Mini, dmesg below). > > 4288m32.43s real 3309m41.24s user 802m02.37s system > Recompiling now with the new malloc to see the difference.
Note that during a make build, libs get installed after building them so all dynamically linked programs will use the new malloc from that point, as there is no revision bump. -Otto > > > Jan > > > [ using 1308496 bytes of bsd ELF symbol table ] > console out [ATY,RockHopper2_A] console in [keyboard], using USB > using parent ATY,RockHopper2Paren:: memaddr 98000000, size 8000000 : consaddr > 9c008000 : ioaddr 90020000, size 20000: width 1920 linebytes 2048 height 1080 > depth 8 > Copyright (c) 1982, 1986, 1989, 1991, 1993 > The Regents of the University of California. All rights reserved. > Copyright (c) 1995-2022 OpenBSD. All rights reserved. https://www.OpenBSD.org > > OpenBSD 7.0-current (GENERIC) #0: Mon Jan 31 13:22:27 CET 2022 > h...@ppc.stare.cz:/usr/src/sys/arch/macppc/compile/GENERIC > real mem = 1073741824 (1024MB) > avail mem = 1025527808 (978MB) > random: good seed from bootblocks > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root: model PowerMac10,2 > cpu0 at mainbus0: 7447A (Revision 0x102): 1499 MHz: 512KB L2 cache > mem0 at mainbus0 > spdmem0 at mem0: 1GB DDR SDRAM non-parity PC3200CL3.0 > memc0 at mainbus0: uni-n rev 0xd2 > "hw-clock" at memc0 not configured > kiic0 at memc0 offset 0xf8001000 > iic0 at kiic0 > mpcpcibr0 at mainbus0 pci: uni-north > pci0 at mpcpcibr0 bus 0 > pchb0 at pci0 dev 11 function 0 "Apple UniNorth AGP" rev 0x00 > agp at pchb0 not configured > radeondrm0 at pci0 dev 16 function 0 "ATI Radeon 9200" rev 0x01 > drm0 at radeondrm0 > radeondrm0: irq 48 > mpcpcibr1 at mainbus0 pci: uni-north > pci1 at mpcpcibr1 bus 0 > macobio0 at pci1 dev 23 function 0 "Apple Intrepid" rev 0x00 > openpic0 at macobio0 offset 0x40000: version 0x4614 feature 3f0302 LE > macgpio0 at macobio0 offset 0x50 > "modem-reset" at macgpio0 offset 0x1d not configured > "modem-power" at macgpio0 offset 0x1c not configured > macgpio1 at macgpio0 offset 0x9: irq 47 > "programmer-switch" at macgpio0 offset 0x11 not configured > "gpio5" at macgpio0 offset 0x6f not configured > "gpio6" at macgpio0 offset 0x70 not configured > "extint-gpio15" at macgpio0 offset 0x67 not configured > "escc-legacy" at macobio0 offset 0x12000 not configured > zs0 at macobio0 offset 0x13000: irq 22,23 > zstty0 at zs0 channel 0 > zstty1 at zs0 channel 1 > aoa0 at macobio0 offset 0x10000: irq 30,1,2 > "timer" at macobio0 offset 0x15000 not configured > adb0 at macobio0 offset 0x16000 > apm0 at adb0: battery flags 0x0, 0% charged > piic0 at adb0 > iic1 at piic0 > maxtmp0 at iic1 addr 0xc8: max6642 > kiic1 at macobio0 offset 0x18000 > iic2 at kiic1 > wdc0 at macobio0 offset 0x20000 irq 24: DMA > audio0 at aoa0 > ohci0 at pci1 dev 26 function 0 "Apple Intrepid USB" rev 0x00: irq 29, > version 1.0, legacy support > ohci1 at pci1 dev 27 function 0 "NEC USB" rev 0x43: irq 63, version 1.0 > ohci2 at pci1 dev 27 function 1 "NEC USB" rev 0x43: irq 63, version 1.0 > ehci0 at pci1 dev 27 function 2 "NEC USB" rev 0x04: irq 63 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 configuration 1 interface 0 "NEC EHCI root hub" rev 2.00/1.00 > addr 1 > usb1 at ohci0: USB revision 1.0 > uhub1 at usb1 configuration 1 interface 0 "Apple OHCI root hub" rev 1.00/1.00 > addr 1 > usb2 at ohci1: USB revision 1.0 > uhub2 at usb2 configuration 1 interface 0 "NEC OHCI root hub" rev 1.00/1.00 > addr 1 > usb3 at ohci2: USB revision 1.0 > uhub3 at usb3 configuration 1 interface 0 "NEC OHCI root hub" rev 1.00/1.00 > addr 1 > mpcpcibr2 at mainbus0 pci: uni-north > pci2 at mpcpcibr2 bus 0 > kauaiata0 at pci2 dev 13 function 0 "Apple Intrepid ATA" rev 0x00 > wdc1 at kauaiata0 irq 39: DMA > wd0 at wdc1 channel 0 drive 0: <ST9160821A> > wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors > wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 > "Apple UniNorth Firewire" rev 0x81 at pci2 dev 14 function 0 not configured > gem0 at pci2 dev 15 function 0 "Apple Uni-N2 GMAC" rev 0x80: irq 41, address > 00:14:51:17:42:34 > bmtphy0 at gem0 phy 0: BCM5221 100baseTX PHY, rev. 4 > uhub4 at uhub3 port 1 configuration 1 interface 0 "Mitsumi Electric Hub in > Apple Extended USB Keyboard" rev 1.10/4.10 addr 2 > uhidev0 at uhub4 port 3 configuration 1 interface 0 "Mitsumi Electric Apple > Extended USB Keyboard" rev 1.10/4.10 addr 3 > uhidev0: iclass 3/1 > ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 13 > wskbd0 at ukbd0: console keyboard > uhidev1 at uhub4 port 3 configuration 1 interface 1 "Mitsumi Electric Apple > Extended USB Keyboard" rev 1.10/4.10 addr 3 > uhidev1: iclass 3/0, 3 report ids > uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0 > ucc0 at uhidev1 reportid 3: 4 usages, 4 keys, enum > wskbd1 at ucc0 mux 1 > vscsi0 at root > scsibus1 at vscsi0: 256 targets > softraid0 at root > scsibus2 at softraid0: 256 targets > bootpath: /pci@f4000000/ata-6@d/disk@0:/bsd > root on wd0a (64c5f028a86139ec.a) swap on wd0b dump on wd0b > radeondrm0: RV280 > [drm] *ERROR* Unable to locate a BIOS ROM > radeondrm0: 1920x1080, 32bpp > wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0 > wskbd1: connecting to wsdisplay0 > wsdisplay0: screen 1-5 added (std, vt100 emulation)