Hi Stefan,
* Stefan Sperling wrote:
> On Thu, Mar 10, 2022 at 12:25:17PM +0100, Stefan Sperling wrote:
> > Unless anyone else finds a problem, this patch can be considered ready
> > for review and commit.
>
> Of course, I forgot to apply my sysassert fix to the second phy context
> command function... Fixed here.
I have this patch (and the previous ones as well) running on the
following HW connected to a Fritzbox 7560 which reports that the Thinkpad
is connected via 80MHz and 11ac.
iwx0 at pci2 dev 0 function 0 "Intel Wi-Fi 6 AX200" rev 0x1a, msix
iwx0: hw rev 0x340, fw ver 67.8f59b80b.0, address bc:f1:71:cf:3d:f7
iwx0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
lladdr 50:7b:9d:73:aa:8a
index 2 priority 4 llprio 3
trunk: trunkdev trunk0
groups: wlan
media: IEEE802.11 autoselect (VHT-MCS3 mode 11ac)
status: active
ieee80211: join karlsruhe.v01d chan 44 bssid cc:ce:1e:8b:cf:d1 56%
wpakey wpaprotos wpa2 wpaakms psk wpaciphers ccmp wpagroupcipher ccmp
So far all is stable and the speed difference is measureable.
Previously, the max speed I had was around 17M/s, with the patch I get
around 25M/s.
Cheers and thanks for the work!
Matthias
