Just a heads up, I was trying a few install variations of -current and noticed
sshd reorder failing on boot on one of them. Unpacking
/usr/share/relink/usr/sbin/sshd/sshd.tar and running `make -f Makefile.relink
relink` by hand yielded:
ld: error: cannot open crt0.o: No such file or directory
cc: error: linker command failed with exit code 1 (use -v to see invocation)
Sure enough, that particular install had base72 but not comp72.
# tar ztf comp72.tgz|grep crt0.o
./usr/lib/crt0.o
./usr/lib/gcrt0.o
./usr/lib/rcrt0.o
Not sure if this is worth being picky over, as non-compiler installs are
rare/not recommended, but I wanted to make a mention just in case. Thanks.
dmesg (amd64 VMM):
OpenBSD 7.2-current (GENERIC) #949: Thu Jan 26 09:54:34 MST 2023
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 1593823232 (1519MB)
avail mem = 1526300672 (1455MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf36e0 (10 entries)
bios0: vendor SeaBIOS version "1.14.0p0-OpenBSD-vmm" date 01/01/2011
bios0: OpenBSD VMM
acpi at bios0 not configured
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel(R) Core(TM) i5-8259U CPU @ 2.30GHz, 2304.01 MHz, 06-8e-0a
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,CX8,SEP,PGE,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,PCLMUL,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,RDRAND,HV,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,RDSEED,ADX,SMAP,CLFLUSHOPT,MD_CLEAR,MELTDOWN
cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB 64b/line
4-way L2 cache, 6MB 64b/line 12-way L3 cache
cpu0: smt 0, core 0, package 0
cpu0: using VERW MDS workaround
pvbus0 at mainbus0: OpenBSD
pvclock0 at pvbus0
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "OpenBSD VMM Host" rev 0x00
virtio0 at pci0 dev 1 function 0 "Qumranet Virtio RNG" rev 0x00
viornd0 at virtio0
virtio0: irq 3
virtio1 at pci0 dev 2 function 0 "Qumranet Virtio Network" rev 0x00
vio0 at virtio1: address fe:e1:bb:d1:69:3f
virtio1: irq 5
virtio2 at pci0 dev 3 function 0 "Qumranet Virtio Storage" rev 0x00
vioblk0 at virtio2
scsibus1 at vioblk0: 1 targets
sd0 at scsibus1 targ 0 lun 0: <VirtIO, Block Device, >
sd0: 24576MB, 512 bytes/sector, 50331648 sectors
virtio2: irq 6
virtio3 at pci0 dev 4 function 0 "OpenBSD VMM Control" rev 0x00
vmmci0 at virtio3
virtio3: irq 7
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns8250, no fifo
com0: console
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (4d3a796cdb2bafb8.a) swap on sd0b dump on sd0b
Brian Conway
