I know what you mean about the volume problem. From similar enquiries elsewhere there is no way to adjust volume in Recovery.
What I use is the FiiO A1 Mini Portable Headphone Amplifier for this sort of job. Just plug the usb connection lead into your iMac to provide power to the amplifier via the micro usb cable provided, and then connect the amplifier via the 3.5 leads provided to your 3.5 socket on your iMac. Then turn on the amplifier - it is the button furthest away from the headphone socket. Hold it down for about 3 seconds to turn on. The volume up is the button closest to the headphone socket and the volume down is alongside. Plug your earphones / headphones into the amplifier and you are good to go. Once the amplifier is on pressing the on off button briefly cycles through loudness profiles. Hold down the same button to turn off. I use several of these amplifiers with different annoyingly quiet devices. They apparently do not work with digital radios but I have not personally tried this. They are pretty cheap for what they do on Amazon. I bought mine for about £20. If the latest iMac does not have 3.5inch socket then I am afraid words like without a paddle and creek come to mind. David Griffith David Griffith and -----Original Message----- From: Dane Trethowan [mailto:grtd...@internode.on.net] Sent: 27 June 2017 03:04 To: techno-chat@techno-chat.net Subject: [Techno-Chat]: iMac recovery utility with Voiceover Hi! I'm currently in the middle of reinstalling Mac OS on my iMac, I've been having an issue with Sound Forge for Mac hwich has prevented me from entering any activation information for the application, every time I've tried to enter information - or even run the Application I get a "Registration Error" and the software quits so perhaps the way around this is a full and complete reinstall of everything from the ground up bypassing the Mac Migration Wizard -. The whole procedure will be straight forward but the main thing that's irritating me right now is the incredibly low audio volume of Voiceover whilst in the recovery utility so if anyone knows if its possible to raise the volume here then I'd really like to hear about it, I suspect that I'll just have to struggle on though. -- ********** "Live each day as if you were goiing to die tomorrow, learn each day as if you were going to live forever" ------------------------------ This post, like all posts to the Techno Chat E-Mail group has been scanned by our server-side antivirus/malware solution. This should not, however, be viewed as a substitution for your own security strategy. We assume no culpability whatever, implicit or otherwise, for any compromise to your systems as a result of opening any post to this group. Suffice it to say that we remain vigilant within the boundaries of reason. We strongly urge you to do likewise! You have been warned!!! You can find an RSS listing of all posts to this group at: <https://mail.mac-access.net:7025/list/techno-chat@techno-chat.net> To encourage your friends to join this group, first accept our thanks for spreading the word. Then, have them send a message to the list processing engine at: <techno-chat-j...@techno-chat.net> To toggle on/off Digest (batch) mode for this group, please send a blank message to: <techno-chat-dig...@techno-chat.net> To leave the group, please send a blank message to: <techno-chat-le...@techno-chat.net>. To contact the support address for this group, please write to: supp...@techno-chat.net> ------------------------------ ------------------------------ This post, like all posts to the Techno Chat E-Mail group has been scanned by our server-side antivirus/malware solution. This should not, however, be viewed as a substitution for your own security strategy. We assume no culpability whatever, implicit or otherwise, for any compromise to your systems as a result of opening any post to this group. Suffice it to say that we remain vigilant within the boundaries of reason. We strongly urge you to do likewise! You have been warned!!! You can find an RSS listing of all posts to this group at: <https://mail.mac-access.net:7025/list/techno-chat@techno-chat.net> To encourage your friends to join this group, first accept our thanks for spreading the word. Then, have them send a message to the list processing engine at: <techno-chat-j...@techno-chat.net> To toggle on/off Digest (batch) mode for this group, please send a blank message to: <techno-chat-dig...@techno-chat.net> To leave the group, please send a blank message to: <techno-chat-le...@techno-chat.net>. To contact the support address for this group, please write to: supp...@techno-chat.net> ------------------------------
