You're reading me wrong, the Fixed network is only centimeters away so
I'd rather use it, with the antenna's affixed to the tuner it won't fit
in my cabinet correctly, snags other leads etc.
On 26/08/2017 10:26 PM, Gordon Smith wrote:
I don’t see the problem then. WiFi should work inside of a cabinet
given that proximity.
=================================================
My compliments and kindest regards
Gordon Smith:
<[email protected] <mailto:[email protected]>>
Accessibility & Information Technology Support Specialist..
This Message Was Created Using 100% Recycled Electrons. If you can
avoid printing it, please do so. Think of the environment, save a tree!
Contact:
• UK Free Phone: 0800 8620538
• UK Mobile/SMS: +44 (0) 7907 823971
• Vic. Australia: +61 38 82059300
• US/Canada: +1 646 9151493
• UK Geographic / Global: +44(0) 1642 688095
----------------------------------------
——
On 26 Aug 2017, at 13:17, Dane Trethowan <[email protected]
<mailto:[email protected]>> wrote:
Thanks for your thoughts, at $15 for each adapter I'm prepared to
take the gamble though I do hope my T14 works afterwoods and I don't
stuff anything up.
I Thought about the repeater idea and there's no sense me going down
that road as the LAN is centimeters away from the T14 itself,
actually its an Ithernet switch connected via a line adapter which
has its opposite number directly connected to the Asus rooter itself
so - if I can get it going - the LAN is there for the taking.
As for Wi-Fi performance of the T14 itself at present? Well as I say
I can't fault it at all but it its a pain in the bum physically as I
outlined.
Actually you do have a device that could benefit from a fixed
connection and it too uses the USB port on the back for a fixed
connection, i speak of course of your Polk Omni S6.
On 26/08/2017 10:07 PM, Gordon Smith wrote:
Firstly, to answer your comment about a service port. USB Service
ports are used by repair technicians, that kind of thing, using
dedicated software to work with specific systems. They often have
access to things like level inputs and outputs, along with other
configuration parameters which the user never needs to know about,
let alone tinker with.
Regarding the adapter, you may find that some will work, some won’t.
It depends really on how Robel have configured your system. In all
probability, your solution should work. However, not always. If the
port needs to be enabled, by the engineer analysing your system, I
mean, then you could be out of luck. But, if they are saying you
need an adapter from them, in all probability that’s just sales
talks. They’d probably charge you a fortune for the brand name, and
nothing else.
I’ll give you an example of both these scenarios because I’ve been
there. I used to own a Pace Sky box. On the rear of that box, there
was a USB host port marked, “Service”. Just out of interest, I did
exactly what you’re about to try, as that box didn’t have Ethernet
or WiFi. Sky were selling what they used to call the “Sky Connector”
kit. Essentially, it was just a LAN adapter, with a service port
extender socket as well.
Sky wanted £99.99 for this adapter, which I refused point blank to
pay. I bought a Buck-she adapter from a local computer hardware
store. I plugged it into the Service port, and turned the box on.
Well, the LEDs on the box apparently flashed like traffic lights for
a little while, then it all just went dead. That box never worked
again, and I had to replace it.
I went online and looked for a company selling the boxes, as I
refused again to pay Sky’s £349.99 asking price for the then current
Sky Plus box. I found a company selling the new boxes for just
£99.99 which, as you can see, was quite a significantly lower price.
That box, I still have to this day and it works fine.
All that having been said, I have another piece of equipment to
which I would also like to use via Ethernet. It, too, contains a USB
Service port. But the manufacturers of that device were much more
forthcoming than the Sky dealers were. They told me that, if I took
the unit into a local repair shop and gave them a reference number
of the case that I opened with the manufacturers, they would be
quite happy for me to use the port as an Ethernet hub. This, I duly
did. And I used the Slingbox in this configuration for quite some
time until my circumstances changed, and I no longer required it.
So based on my own experience, I would say that, if you consider the
gamble worthwhile, then try it. If not, then there is one more thing
you could try and this is also something I’ve done.
Why not just buy a WiFi Extender? Set it up as it comes by default,
in repeater mode. Then just plug it into an AC port close to your
tuner, and it will boost the signal to and from your router. Thus,
you can use it in a cabinet or backed shelving arrangement. That is
how my Neo box is configured and it works just fine. Although the
Neo box does have Ethernet, if I remember rightly, it isn’t
convenient for me to run cables from the media centre here in my
lounge to the router in my front room. But this solution works a
treat, solves the problem without taking any chances. The extender
only cost me £19.99 so it was definitely a worthwhile investment.
Just my thoughts.
=================================================
My compliments and kindest regards
Gordon Smith:
<[email protected] <mailto:[email protected]>>
Accessibility & Information Technology Support Specialist..
This Message Was Created Using 100% Recycled Electrons. If you can
avoid printing it, please do so. Think of the environment, save a tree!
Contact:
• UK Free Phone: 0800 8620538
• UK Mobile/SMS: +44 (0) 7907 823971
• Vic. Australia: +61 38 82059300
• US/Canada: +1 646 9151493
• UK Geographic / Global: +44(0) 1642 688095
----------------------------------------
——
On 26 Aug 2017, at 12:14, Dane Trethowan <[email protected]
<mailto:[email protected]>> wrote:
And that I am, he's given me excellent advice and service up until
this point so let me explain.
I bought a Rotel T14 Dab/FM/Internet Internet streamer back in
February this year, its a wonderful high quality piece of gear and
I have no problem with the equipment except for one annoyance, the
T14 doesn't have a LAN port so all connectivity to your network is
done by Wi-Fi though this in itself is absolutely nothing to
complain about.
The T14's Wi-Fi connectivity is rock solid on either 2.4 or 5.0GHZ
with an array of 3 antennas on the back.
So one has to wonder why the designers of the T14 left out a LAN port?
W-Fi connectivity is fine as it goes (in particular very good Wi-Fi
connectivity)( but its a damn pain in the bum having those 3
antennas standing proud on the back of your T14 when you're wanting
to house the device in a cabinet or shelf.
So I turned to the manual of the Rotel T14 to see if any other
connectivity solution was offered and I discovered that yes, their
was another way and that was using an adapter that plugs into the
USB port on the back of the T14.
Now apparently this USB port is labeled "Service", whatever that is
supposed to mean.
The manual then tells the user to "Consult Your Rotel Dealer" and
that's exactly what I did.
The dealer didn't have any idea what I was talking about but at
least he did contact the distributor of Rotel equipment out here
asking for a further explanation of this mysterious USB to Ethernet
Port adapter.
The dealer got back to me telling me that he hoped to have stock of
the adapter within a week and the cost of the adapter could be
anywhere from $50 to $100, possibly that much? Well if it meant I
could connect the Rotel T14 to a fixed LAN port then I'd be happy.
Well all this was some time ago and I've not heard a dicky bird on
the subject from my friendly Rotel dealer so I decided to take
matters into my own hands and I'm not sure whether this will work
but its worth a try.
I spotted some USB 3 to Ethernet port adapters on eBay at $15 each
so I bought four of those given the usefulness of the adapters
themselves for other applications in my home.
I'm awaiting the arrival of these adapters and then comes the
business of testing one with the Rotel T14 to see whether it will
work, i'm hoping it will and I won't need some sort of proprietary
adapter from Rotel.
I'll let the list know how I get on.
--
**********
"Live each day as if you were goiing to die tomorrow, learn each
day as if you were going to live forever"
------------------------------
This post, like all posts to the Techno Chat E-Mail group has been
scanned by our server-side antivirus/malware solution. This should
not, however, be viewed as a substitution for your own security
strategy. We assume no culpability whatever, implicit or otherwise,
for any compromise to your systems as a result of opening any post
to this group. Suffice it to say that we remain vigilant within the
boundaries of reason. We strongly urge you to do likewise! You have
been warned!!!
You can find an RSS listing of all posts to this group at:
<https://mail.mac-access.net:7025/list/[email protected]>
or at:
<https://www.mail-archive.com/search?l=all&[email protected]>
To encourage your friends to join this group, first accept our
thanks for spreading the word. Then, have them send a message to
the list processing engine at:
<[email protected]
<mailto:[email protected]>>
To toggle on/off Digest (batch) mode for this group, please send a
blank message to:
<[email protected]
<mailto:[email protected]>>
To leave the group, please send a blank message to:
<[email protected]
<mailto:[email protected]>>.
To contact the support address for this group, please write to:
[email protected] <mailto:[email protected]>>
------------------------------
--
**********
"Live each day as if you were goiing to die tomorrow, learn each day as if you were
going to live forever"
--
**********
"Live each day as if you were goiing to die tomorrow, learn each day as if you were
going to live forever"
