Yes, Joe. The replacement I used didn't have an "A" on the end, but it does have a black "dot" just after the STR*, which they say means the same thing. Didn't notice any "blooming" of the picture.
Regards, LLW LeRoy Westlund Westlund TV & Electronics 97 North Main "At least I'll go down Centerfield, UT 84622-0087 swingin,......what a swingin Ph./Fax 435-528-3822 way to go." mailto:[EMAIL PROTECTED] -----Original Message----- From: Joe Tech2004 <[EMAIL PROTECTED]> To: ELECTRONICS PROFESSIONALS LIST <[EMAIL PROTECTED]> Date: Saturday, January 17, 2004 4:25 AM Subject: Re: [Techs] Orion TV model TV2520A B+ too high ? LeRoy, You say "I replaced the parts again with good Generics from a reliable source" Not to say thats not so, and not so much questioning source reliability as to the HOW GOOD Generic.... (Thats always been a problem, i've had to many to even want to remember).... ORION#: (I2B4901100) You sure your generic is a (STR30110A) and not a (STR30110) < no (A) enough difference to be the problem causer... What happens when you adjust screen up & down.... Does it bloom, does B+ vdc regulation change .... Does fly feel a bit warmer then normal..... Just ask yourself this: "WHY ME" :^) "joe" ================================== [EMAIL PROTECTED] From: [EMAIL PROTECTED] (LeRoy Westlund) Date: Fri, Jan 16, 2004, 12:04pm (EST-2) To: [EMAIL PROTECTED] Subject: [Techs] Orion TV model TV2520A B+ too high ? Reply to: [EMAIL PROTECTED] (ELECTRONICS PROFESSIONALS LIST) Hi members, I replaced the Reg IC (STR30110A), and the H.O.T. (2SD2499) and an open R515 (1.6 ohm 3 watt), about 3 months ago in this "Top of the line" Orion TV. Now it has came back to haunt me, with the same parts blown again. I replaced the parts again with good Generics from a reliable source. I also replaced the 1 @ 160 volt elect. cap. in the horz driver ckt.(Even though it tested OK). The picture looks real good, but both heat sinks seem to be running quite Hot. Especially the H.O.T heat sink. The B+ measures 121.7 volts, and I am wondering if that is too high for this set, since the Regulator is an STR30110A. You would think the B+ should be only 110 volts. NO ? Any advice is appreciated, LLW LeRoy Westlund Westlund TV & Electronics 97 North Main "At least I'll go down Centerfield, UT 84622-0087 swingin,......what a swingin Ph./Fax 435-528-3822 way to go." mailto:[EMAIL PROTECTED] _________________________________________ Please include original text when replying to this email. Once you get your unit repaired, please post the fix to the group. Order your tech repair CD today, Version 3.0 only $49.00-more monitor tips-user friendly program. [EMAIL PROTECTED] www.tech-repair.net ______ Techs mailing list [EMAIL PROTECTED] http://intrepid-video.com/mailman/listinfo/techs_intrepid-video.com Go to the link above and scroll to the bottom to enter your email address Joes....Electronics (Joe:Tech/2004) [EMAIL PROTECTED] Fax::509-479-2283 _________________________________________ Please include original text when replying to this email. Once you get your unit repaired, please post the fix to the group. Order your tech repair CD today, Version 3.0 only $49.00-more monitor tips-user friendly program. [EMAIL PROTECTED] www.tech-repair.net ______ Techs mailing list [EMAIL PROTECTED] http://intrepid-video.com/mailman/listinfo/techs_intrepid-video.com Go to the link above and scroll to the bottom to enter your email address _________________________________________ Please include original text when replying to this email. Once you get your unit repaired, please post the fix to the group. Order your tech repair CD today, Version 3.0 only $49.00-more monitor tips-user friendly program. [EMAIL PROTECTED] www.tech-repair.net ______ Techs mailing list [EMAIL PROTECTED] http://intrepid-video.com/mailman/listinfo/techs_intrepid-video.com Go to the link above and scroll to the bottom to enter your email address
