Hello Ivor, This was just posted on another list....looks promising, unless the CRT is really bad:
In follow-up to me earlier post on the IK Bypass , another tech had mentioned this method. Take three 18K resistors and connect one end of each to the Red , Green and Blue Cathodes , the solder the other ends all together. This works perfect , you can see the image come up as the filaments warm up. Image looks like crap because of the dead green cathode BUT picture is not flashing....and that is all the customer wanted.. ================================= Jeff Stielau Jeff Dougherty Intrepid Video TV/VCR 263 S Front St Steelton PA 17113 fax...717-564-4952 www.intrepid-video.com www.tech-repair.net ----- Original Message ----- From: "Ivor Schwartz" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, March 02, 2004 8:54 PM Subject: [Techs] Sony KV27EXR15 Blinking Gentlemen I have a Sony KV27EXR15 in the shop and it is blinking constantly, have adjusted the G2 control but it lasts a few minuets and starts blinking. The CRT has been cleaned at low voltage and was wondering how to do the IK MOD as explained in The Speaker. The IC in this model is CXA1313S but I don't have a plan for the pin combination. Could one of you gentlemen help me out with the pin combination for this IC. Thanks in advance Ivor Schwartz Technician Montreal _______________________________________________ Tech Repair CD...order your just $49.00 plus shipping...One year of updates free. www.intrepid-video.com www.tech-repair.net Techs mailing list [EMAIL PROTECTED] http://intrepid-video.com/mailman/listinfo/techs_intrepid-video.com _______________________________________________ Tech Repair CD...order your just $49.00 plus shipping...One year of updates free. www.intrepid-video.com www.tech-repair.net Techs mailing list [EMAIL PROTECTED] http://intrepid-video.com/mailman/listinfo/techs_intrepid-video.com
