Hi members, This Zenith PTV has a fairly good picture after I adjust the focus on all 3 tubes, but after about 20 minutes the focus adjustments drifts, and I have to readjust the focus. When it's cold, the adjustment range on the pots, are about in the middle. After warm-up I have to turn it almost to the full range in the CW direction.
The gray wire from the High voltage bleeder assy., measures 44.2K to ground. I understand that it should OHM out between 48-51K. I am thinking about ordering a new Focus block assy., from H.B. electronics in California. They have them for about $75. I checked all 3 of the 120K ohm resisters on the CRT modules, and they check OK. Do I need to replace them anyway, and do you think a new focus block will correct my problem, or am I over looking something ? I guess what I need, is a little insurance from the list, before shoveling out that much $$$ for a part I might not need. Please advise, TIA, LLW LeRoy Westlund Westlund TV & Electronics 97 North Main "Where there's a will,... Centerfield, UT 84622-0087 There's always a way." Ph./Fax 435-528-3822 mailto:[EMAIL PROTECTED] _______________________________________________ Tech Repair CD...order your just $49.00 plus shipping...One year of updates free. www.intrepid-video.com www.tech-repair.net Techs mailing list [EMAIL PROTECTED] http://intrepid-video.com/mailman/listinfo/techs_intrepid-video.com
