Joe check all the caps on all the boards. Something that old you'll find at least 100 bad caps. Been there done that. Al Marquardt [EMAIL PROTECTED] Al Marquardt Electronic Repair 206 W Main Girardville Pa. 17935 ----- Original Message ----- From: "Joe Dickerson" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, May 12, 2004 11:27 AM Subject: [Techs] Mitsubishi SD-P4546-K (1990) Blows FU654...sounds like HV comes up.
> I made a call on this set originally and unplugged the set and > plugged it back in and then the power button worked. (at least you could > hear the HV come up). The CRT's don't light up and I was told the print > was available only on fische. When I got the microfische, there was only > a limited amount of information on it. (Board connection lay-out, etc.) > There is no way to see where FU 654 (GMA 4A.) is connected. When it > blows at turn-on, I hear the HV come up, but no CRT's light up. No sound > , but this may be related to the fuse blowing. Any help is greatly > appreciated. > Thanks, Guys, > Joe > -- > Joe Dickerson > Joe's TV & Appliance > Rt 1 Box 3781 > Jasper, Texas 75951 > (409) 384-3325 > use same no. for fax > > > _______________________________________________ > Tech Repair CD...order your just $49.00 plus shipping...One year of updates free. > www.intrepid-video.com www.tech-repair.net > Techs mailing list > [EMAIL PROTECTED] > http://intrepid-video.com/mailman/listinfo/techs_intrepid-video.com > > _______________________________________________ Tech Repair CD...order your just $49.00 plus shipping...One year of updates free. www.intrepid-video.com www.tech-repair.net Techs mailing list [EMAIL PROTECTED] http://intrepid-video.com/mailman/listinfo/techs_intrepid-video.com
