Walter, HTH Courtesy of Jeff Dougherty >From Tech Repair CD:
Zenith\A50M91W\No video(black)*audio OK\\\\Replace FBT(95-4134-19)*QX3200 HOT(2SD1880)*QX3402(K790 FET REG)*CRX3412(ECG580)\\\\\\\\ ZENITH \9-1674\Dead Set\\\9-1674\Replace Flyback #95-4134-15* Bleeder Assy #A-17196-12* Crx3412 Use ECG 577 1kv* 5a* 70ns Fast Switch* Qx3200=1167-01 Or 2sd2553\\\\\\\\ I guess the question is, did you use OEM for the HOT? [EMAIL PROTECTED] From: [EMAIL PROTECTED](walter�wood) Date: Wed, Dec 8, 2004, 1:55pm (EST-3) To: [EMAIL PROTECTED] (Techs) Subject: [Techs] Zenith RA56M91D-- 9-1978 Sweep board shutting down Reply�to: [EMAIL PROTECTED] (ELECTRONICS PROFESSIONALS LIST) This set comes on with sound but no raster. High voltage is present for about 1 second, as shown by the flash of a neon bulb in the glass tube I use to isolate the anode lead. A neon bulb held near the flyback does the same, whether the anode is inserted into the splitter or not. Anyone got any tips for me?? TIA Walter ===== Walter Wood United TV Service 501 Poplar St. P.O. box 602 Pulaski Tn. 38478 mailto:[EMAIL PROTECTED] ______________________________________________ Tech Repair CD...order your just $49.00 plus shipping...One year of updates free. www.intrepid-video.com www.tech-repair.net Techs mailing list [EMAIL PROTECTED] http://intrepid-video.com/mailman/listinfo/techs_intrepid-video.com Joes....Electronics �(Joe:Tech/2004) [EMAIL PROTECTED] Fax::509-479-2283 _______________________________________________ Tech Repair CD...order your just $49.00 plus shipping...One year of updates free. www.intrepid-video.com www.tech-repair.net Techs mailing list [EMAIL PROTECTED] http://intrepid-video.com/mailman/listinfo/techs_intrepid-video.com
