You got it, the plmnid was wrong so the S1 connection never came up.
On Jul 21, 2016, at 10:10 AM, Shayne Lebrun <[email protected]> wrote: > I believe the order is that you have to have a valid S1 connection, *then* > the eNodeB will try to turn on the GPS. If the GPS works, *then* the eNodeB > will start turning on the antenna ports. > > If you take an eNodeB out of the box, plug in a GPS, log in to the management > IP, and look at the timing port, the unit will never ever ever say that it > has timing, or even gps-comm-status. It needs to be configured enough, and > cabled enough, to have a valid S1 signaling connection to the EPC. > > I’ve told telrad that some UI changes, like a simple command to tell us where > it is in the process between ‘cold boot’ and ‘fully functional’ would be > nice, as well as maybe some more descriptive statuses. ‘timing > gps-comm-status NoS1Server’ would be far more useful. > > Or, you know, just decouple initiating the GPS device from having a valid s1 > server. > > Similarly, imagine this: > >show ran port > PORT OPERATIONAL ADMIN > NUM STATUS STATE > ------------------------------ > 1 OutOfService-NoTiming InService > etc > Or: > >show ran port > PORT OPERATIONAL ADMIN > NUM STATUS STATE > ------------------------------ > 1 OutOfService-NoS1 InService > > Or maybe even: > >show ran port > PORT OPERATIONAL ADMIN ERROR > NUM STATUS STATE STATE > ----------------------------------------------- > 1 OutOfService InService NoTiming or NoS1 > > > Or maybe couple it into show status device: > >show status device > general { > product-type COMPACT; > product-subtype ENB; > compact-model-type BreezeCompact3000; > } > inventory { > hw-ver "1 (CORE: E500MC v3.2)"; > serial-number 95018308; > main-sw-ver 0606.04013; > backup-sw-ver 0600.02616; > running-sw MainSW; > boot-ver 2013.01.00014; > up-time 2016-07-21T11:07:27-05:00; > } > Service-prerequisites{ > S1-signalling VALID; > Timing VALID; > Ran-ports VALID; > } > > Or something like that. > > > From: [email protected] [mailto:[email protected]] On Behalf Of > David Peterson > Sent: Thursday, July 21, 2016 11:45 AM > To: [email protected] > Subject: Re: [Telrad] GPS > > It will also look like that if your S1 is down. > > David > > > From: [email protected] [mailto:[email protected]] On Behalf Of > Steve Discher > Sent: Thursday, July 21, 2016 11:39 AM > To: Scott Lambert <[email protected]> > Subject: Re: [Telrad] GPS > > Did you follow the wiring diagram that came with the GPS to make the cable? > If so, they are fried. They require a standard Cat5 cable, not the one on > the diagram that seems to still be included with some antennas. That wiring > diagram was for a different radio platform, not the Compact and we have had > many operators follow it and kill their GPS. Telrad has been RMA ing any > that happened to. We went through our tock and removed those directions but > I suspect there are some floating around still. > > > On Jul 21, 2016, at 9:21 AM, Dan Petermann <[email protected]> wrote: > > We are putting up 2 new sectors and both of them have no GPS comms. > > Any idea of what to look for? I have a hard time believing that both GPS > antennas are bad. > > > BreezeCompact> show timing > timing gps-comm-status Down > timing external-1pps-status NotExist > timing coordinates longitude "" > timing coordinates latitude "" > timing coordinates altitude 0 > [ok][1969-12-31 17:02:24] > _______________________________________________ > Telrad mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/telrad > > Steve Discher > [email protected] > ISP Supplies Office: (855) 947-7776 / Fax: (866) 585-2175 > 10770 State Hwy. 30, Suite 200 College Station, TX 77845 > http://www.ispsupplies.com > Follow my WISP Blog > Follow the WirelessRoadshow.net > > > <image001.jpg><image002.jpg> <image001.jpg><image002.jpg> > <image001.jpg><image002.jpg> <image001.jpg><image002.jpg> > <image001.jpg><image002.jpg> > > _______________________________________________ > Telrad mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/telrad
_______________________________________________ Telrad mailing list [email protected] http://lists.wispa.org/mailman/listinfo/telrad
