Oh ok, thanks.
------ Original Message ------
From: "Matthew Carpenter" <[email protected]>
To: "Telrad List" <[email protected]>
Cc: "Adam Moffett" <[email protected]>
Sent: 2/7/2017 11:53:39 PM
Subject: Re: [Telrad] Handover
At this point we were told the X2 is not ready for primetime and to
lock the UE to the Cell.
It seems it can be turned on, but Dave said it will flop back and forth
from eNB to eNB causing other issues.
MattCarpenter
On Tue, Feb 7, 2017 at 4:26 PM, Nathan Anderson <[email protected]>
wrote:
Not us, yet. Haven't even tried wandering down that rabbit hole.
I will note, though, that CPE8000 firmware has a vastly superior
mechanism for locking to specific eNB than the 7000 does (at least
currently), because it isn't based on frequency but rather Cell-ID.
So you can change channels on your eNBs and your locked-down 8000s
won't need to be reconfigured. And you can have multiple Cell-IDs in
the preferred list, and the cell-lock can either be hard (only ever
connect to this Cell-ID) or soft (prefer this Cell-ID; if it isn't
available, feel free to connect to something else, but then check
every X minutes to see if something in the preferred list happens to
be broadcasting again).
It'd be nice if this also came to the 7000 at some point, but then
again if X2/handover is either working right now or close to working,
maybe they consider putting more effort into the 7K firmware a waste
of time.
-- Nathan
--------------------------------------------------------------------------------
From:[email protected] <[email protected]> on behalf of
Adam Moffett <[email protected]>
Sent: Tuesday, February 7, 2017 12:21 PM
To:[email protected]
Subject: [Telrad] Handover
Is anybody using handover successfully?
I'm looking for a way to keep UE on the best eNB without locking in
specific frequencies.
_______________________________________________
Telrad mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/telrad
--
Matthew Carpenter
806-316-5071 office
806-236-9558 cell
_______________________________________________
Telrad mailing list
[email protected]
http://lists.wispa.org/mailman/listinfo/telrad