No external actions and no @urls. Does the config file look okay to you?
On a side note, I am going through every application and purging variables when not needed, getting rid of unneeded columns in searches, tightening up the code, etc. I do have some very basic questions, though. There are quite a few arrays being built and purged, mostly due to the client wanting to update multiple rows of data with a single click. Some of these arrays are being updated in a loop action rather then using <@ROWS>. Is there a performance hit or difference for using one versus the other? I think I know the answer to this one, but is there any advantage to running a different application pool on a subdirectory that is being used for administration for the client? I do run separate application pools on our other servers per website, but this server currently has one site that is divied up between public and admin. Thanks! _____ From: Robert Shubert [mailto:[email protected]] Sent: Tuesday, October 23, 2012 3:50 PM To: [email protected] Subject: RE: TeraScript-Talk: config file In my experience, this is caused by simultaneous calls to either the External Action or to @URL. Look through your TAFs and remove these types of calls. Robert From: WebDude [mailto:[email protected]] Sent: Tuesday, October 23, 2012 2:05 PM To: [email protected] Subject: RE: TeraScript-Talk: config file yes _____ From: Robert Shubert [mailto:[email protected]] Sent: Tuesday, October 23, 2012 12:53 PM To: [email protected] Subject: RE: TeraScript-Talk: config file By 'thread locks' do you mean a state where the server reports some number of threads in use and the number slowly increases until the server stops responding because it's out of threads? Robert From: WebDude [mailto:[email protected]] Sent: Tuesday, October 23, 2012 1:30 PM To: [email protected] Subject: TeraScript-Talk: config file Hi Folks, I have several versions of Tera and the old Witango running on several boxes. The one box I am concenred about, unfortunately, is running an old version of Witango (2000 but fully patched with the lastest). I am wondering if one of you kind souls who have been around for a while could take a look at the config file to see if I am missing something. We are starting to get thread lock when the server gets busy. I have been pulling my hair out and trying to make it break myself but cannot find anything. I am most concwerned with memory vs what I have set up. I have actually seen the same userreference assing to 2 users from different IP addresses... not sure waht is going on. The box is running MS 2008 server web edition with 8 gigs of ram. It is the only thing we are running on the box. The DB is on another box running MSSQL 2008. Following is what I have. I am most concerned with cache settings, datasourcelife, itembuffersize, querytimeout, rerquestlimit and threadpoolsize. If anything is glaringly incorrect, I would appreciate a response... THANKS! [Tango_2000_Server] ABSOLUTEPATHPREFIX= ALTUSERKEY=<@CGIPARAM CLIENT_IP> APPCONFIGFILE=C:\\PVSW\\Tango2000\\Configuration\\applications.ini APPLICATIONSWITCH=off APREFIX=<TABLE BORDER="1"> ASUFFIX=</TABLE> CACHE=true CACHEINCLUDEFILES=true CACHESIZE=50457280 CDELIM=, CONFIGPASSWD= CPREFIX=<TD> CRONTABFILE= CSUFFIX=</TD> CURRENCYCHAR=$ CUSTOMSCOPESWITCH=off CUSTOMTAGSPATH=C:\\PVSW\\Tango2000\\Configuration\\CustomTags DATASOURCELIFE=15 DATEFORMAT=%m/%d/%Y DBDECIMALCHAR=. DEBUGMODE=appFileSetting DECIMALCHAR=. DEFAULTERRORFILE=C:\\PVSW\\Tango2000\\Configuration\\error.htx DEFAULTSCOPE=user DOCSSWITCH=on DOMAINCONFIGFILE=C:\\PVSW\\Tango2000\\Configuration\\domains.ini DOMAINSCOPEKEY=<@CIPHER action=hash str=<@LOWER <@DOMAIN>>> DSCONFIGFILE= ENCODERESULTS=true EXTERNALSWITCH=on FILEDELETESWITCH=on FILEREADSWITCH=on FILEWRITESWITCH=on HEADERFILE=C:\\PVSW\\Tango2000\\Configuration\\Header.htx ITEMBUFFERSIZE=65535 JAVASCRIPTSWITCH=on JAVASWITCH=on LICENSE= LICENSEERRORHTML=C:\\PVSW\\Tango2000\\Configuration\\licerror.htx LIMITURLTHREADS=true LISTENERPORT=18100 LOGDIR=C:\\WebLogs\\Witango LOGGINGLEVEL=LogLevel1 LOGTORESULTS=FALSE MAILADMIN= MAILDEFAULTFROM=Administrator MAILPORT=25 MAILSERVER= MAILSWITCH=on MAXACTIONS=0 NOSQLENCODING=false OBJECTCONFIGFILE=C:\\PVSW\\Tango2000\\Configuration\\objects.ini PASSTHROUGHSWITCH=on PERSISTENTRESTART=true POSTARGFILTER= QUERYTIMEOUT=60 RDELIM=; REQUESTQUEUELIMIT=0 RETURNDEPTH=20 RPREFIX=<TR> RSUFFIX=</TR> SHUTDOWNURL= STARTSTOPTIMEOUT=60 STARTUPURL= STATICNUMERICCHARS=true STRIPCHARS=true SUPPRESS=0 TCFSEARCHPATH=<@APPFILEPATH>;<@CLASSFILEPATH>;/Tango2000/TCF/ THOUSANDSCHAR=, THREADPOOLSIZE=10 TIMEFORMAT=%H:%M:%S TIMEOUTHTML=C:\\PVSW\\Tango2000\\Configuration\\timeout.html TIMESTAMPFORMAT=%m/%d/%Y %H:%M:%S TRANSACTIONBLOCKING=true USERAGENT= USERKEY=<@USERREFERENCE> VALIDHOSTS=127.0.0.1 VARCACHEPATH=C:\\PVSW\\Tango2000\\Configuration\\variables.Tango_2000_Server VARIABLETIMEOUT=30 _____ To unsubscribe from this list, please send an email to [email protected] with "unsubscribe terascript-talk" in the body. _____ To unsubscribe from this list, please send an email to [email protected] with "unsubscribe terascript-talk" in the body. _____ To unsubscribe from this list, please send an email to [email protected] with "unsubscribe terascript-talk" in the body. _____ To unsubscribe from this list, please send an email to [email protected] with "unsubscribe terascript-talk" in the body. ---------------------------------------- To unsubscribe from this list, please send an email to [email protected] with "unsubscribe terascript-talk" in the body.
