> > I'm not sure how much the answer below helped. > Bey default, dvips is configured to send the resulting > PS file directly to the printer using the command lpr. > If you want a Postscript file, use 'dvips -o file.ps file.dvi'. > If you always want this behaviour, you can run texconfig as root > and change the default dvips output. >
Right,.. it's all dep. of what output you desire. (Of course, default may blur view, but essential is to focus on what you want.. (?), I think.) mh > /Mats > > > Michael Hallgren wrote: > > Hi, > > > > > > > >>Hi, dear: > >> > >>I am a fresh in tex, I had a problem with my dvips, when I try to > >>run dvips > >>it gave me this: > >> > >>This is dvips(k) 5.86 Copyright 1999 Radical Eye Software > >>(www.radicaleye.com) > >>' TeX output 2002.10.04:1658' -> |lpr > >><texc.pro>sh: lpr: not found > >><special.pro>. > > > > > > Means: can't find printer. You're attempting to print or save to file? > > > > Cheers > > > > mh > > > > > >> > >>Can you tell me what is wrong? Thanks. > >> > >>Regards, > >>Shutian > >> > >> > > > > > > -- > ============================================= > Mats Bengtsson > Signal Processing > Signals, Sensors and Systems > Royal Institute of Technology > SE-100 44 STOCKHOLM > Sweden > Phone: (+46) 8 790 8463 > Fax: (+46) 8 790 7260 > Email: [EMAIL PROTECTED] > WWW: http://www.s3.kth.se/~matsb > ============================================= > >
