Have you seen any headlamps that use the new surface mount LEDs?

Like the ones used in this worklight:
http://www.prweb.com/releases/2013/2/prweb10271063.htm

George


On Sat, Jun 15, 2013 at 1:51 AM, David <[email protected]> wrote:

> It is has been a long time since I mentioned anything about
> new LED headlamps.
>
> The lamp I am about to describe was found yesterday at
> AutoZone for a cost of $ 14.99 plus tax.
>
>
> http://contentinfo.autozone.com/znetcs/product-info/en/US/lbm/31077/image/4/
>
> It has a large lens diameter by today's LED standards,
> at over 2 inches in diameter.    I have seen similar headlamps on
> Chinese web-sites for many years, but never seen one sold
> here in the U.S. in a retail store.
>
> It has 53 five millimeter white LED's.     It switches from 10, to 27
> to 53 LED's.    The 10 setting is typical of your really cheap LED
> headlamps.
> The 27 was far brighter, and the 53 appeared to be
> only slightly brighter than the 27.     It has a flashing mode, that seemed
> brighter.
>
> The plastic materials of this headlamp are really cheaply built.    But the
> circuit board looks pretty cool.     But the headlamp is lightweight.
>
> This headlamp is not water resistant.     But maybe with a dab of silicone
> sealant, it can be upgraded to be water-resistant, but never water-proof,
> unless you sealed it permanently for just one use.
>
> It uses 3 AA size batteries, that are included.
>
> I would like to take this to a machine shop and reverse engineer it,
>  to make more durable headlamp.
>
> Hopefully, it will survive a couple of trips to Kiwi Sink.     The switch
> seems
> sturdy enough for that purpose.
>
> Ref:
>
>
> http://www.autozone.com/autozone/accessories/Police-Security-53-LED-headlamp/_/N-25dr?itemIdentifier=554758_0_0_
>
> The brand name is Police Security.
>
> David Locklear
>
> P.S.    There are quite a few new LED headlamps out there if anybody
> wants to post something about them.     There is one sold at Northern
> Tool Company for $ 45 that I have been wanting to try.
>

Reply via email to