Hmmm, this situation is not yet correctly solved in therion. Every station even in extended elevation has its unique coordinates. You have following possibilities:
1. Remove this problematic station from one of these two scraps (it is not 100% solution, but should help) 2. Add not equate, but zero length (or 0.00001 m) shot between these two stations (may be this will help, may be not). There is simple way of solving this problem - adding an option for the station, that is has to be extended from another station instead of taking absolute coordinates. I will put it on the TODO list. Thanks for pointing out this, S. Quoting marco corvi <marco.corvi at elsag.it>: > hi, > > i have a question. > > i have a loop to adjust, > if i do not equate stations in extended section there is > an altitude gap between them. of course therion does not know > they are at the same altitude (or depth). > if i equate, the drawing is awfully distorted because therion > tries to draw them at the same point. > > is there a way to tell therion that two stations are at the same > altitude (depth) ? (but to draw them separately). > > thanks, marco > > > _______________________________________________ > Therion mailing list > Therion at speleo.sk > http://www.speleo.sk/mailman/listinfo/therion > >
