Thanks a lot.....
Andrea --------- Original Message -------- Da: "List for Therion users" <therion at speleo.sk> To: "'List for Therion users'" <therion at speleo.sk> Oggetto: Re: [Therion] scale image Data: 15/10/08 13:23 Hi Andrea I’ve got an output of sorts. (You can rename the thc file to txt) Errors that stopped your files compiling mainly to do with misnaming. File extensions missing in your thconfig file, selection of the map to plot missing. Small glitches: Two bottom lines in isler.th2 needed reversing (tick the reverse box) so the yellow arrow points inside the passage. Hope this gets you started again. Bruce From: therion-bounces at speleo.sk [mailto:[email protected]] On Behalf Of andrea.marassich at email.it Sent: Wednesday, 15 October 2008 9:08 p.m. To: List for Therion users Subject: Re: [Therion] scale image Hi, sorry to bother you again with this issue, which probably is little bit beyond basics and beyond my current understanding of Therion, but it' the cave I'm working on, so I'm just in need of the output :) I just attach the files, hope it works. Maybe there's some very basic misunderstanding....not just the connection of the scraps. thanks a bunch Andrea --------- Original Message -------- Da: "List for Therion users" <therion at speleo.sk> To: "List for Therion users" <therion at speleo.sk> Oggetto: Re: [Therion] scale image Data: 14/10/08 17:31 Hi Andrea, first sorry for the late answer, I am a little bit busy right now. Just to be sure, that I understand your problem correctly: You have an old drawing of some cave part without any centreline data, but you are able to map two stations in that drawing to stations in your centreline. Is this correct? If this is the situation, all you need to do is to add these two stations to this scrap and reference them with "-name" option to the names you know as you do for scraps where you have complete centreline. And new scrap should be placed correctly - I believe. More complicated it would be, if you will have just one or no station, but even this is feasible. If it does not help you, do not hesitate to send me some sample data that demonstrate your problem. My be I did not understood your problem correctly. Regards, S. On Fri, Oct 10, 2008 at 3:59 PM, <andrea.marassich at email.it> wrote: > Sorry, forgot to mention two stations of my centerline are located into the > image I can draw and which is without scale. > > hope this give you enough information. > > best, > > Andrea Marassich > > Hi, > > sorry to bother with a beginner question, but cannot make it even reading > through the archives. > > I have a .th file with centerline and .th2 file with his scraps. > > Now I should add to this a th2 file with an image of an old survey. I drawed > walls and all objects in the scrap but do not know the scale and do not have > original data of the centerline. > > How can I put together my centerline/scrap of known scale with this image? > Do not know how to do it and I'm having dificulty understanding how the > scale process is working. > > could you help me on this? > > thanks a lot > > Andrea Marassich > > _______________________________________________ > Therion mailing list > Therion at speleo.sk > http://mailman.speleo.sk/mailman/listinfo/therion > > _______________________________________________ Therion mailing list Therion at speleo.sk http://mailman.speleo.sk/mailman/listinfo/therion _______________________________________________ Therion mailing list Therion at speleo.sk http://mailman.speleo.sk/mailman/listinfo/therion -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://mailman.speleo.sk/pipermail/therion/attachments/20081015/ae920326/attachment.html>
