First, I am sorry for all e-mails I have not answered until now - I am quite busy at work right now :(((
Could you please use map in offset instead (see samples/map-offset in therion samples dir) or http://therion.speleo.sk/samples.doc/30.html. This should work in extended elevation also I hope. Regards, S. On Wed, Mar 18, 2009 at 6:38 PM, Gilbert Fernandes (mailinglist) <gfe_list at aliceadsl.fr> wrote: > > Hello, > > I notice a problem when you try to move a part of the survey on the final > survey. > I follow the doc (wiki chapt 3.4.4 offseting scraps > http://therion.speleo.sk/wiki/doku.php?id=tbe:wiki3 > <http://therion.speleo.sk/wiki/doku.php?id=tbe:wiki3> ) > It work fine, but to move down a branch of the survey on an extended > elevation, I add a virtual vertical survey with the flags indicated in the > doc >  flags duplicate >   extend ignore >   20 20a 10.00 90 0 0 0 0 0 > > But all the points "altitude" give the new altitude increased of 10 meters > (with a vertical survey of 10 m). > How can I do to have the good altitude ? Do you have a special flag on the > survey measurments to say to therion to not take in account this survey for > altitude ? > I have the same probleme in the 3D model  with Loch because my 3D model take > in account this survey and my branch is not in the good place. > If you have a solution, thanks a lot ! > Gilbert > _______________________________________________ > Therion mailing list > Therion at speleo.sk > http://mailman.speleo.sk/mailman/listinfo/therion >
