Bluetooth connection was a problem on one of the DistoX I have, sometimes it worked other times it did not ( as luck would have it, generally went I had taken it caving.) In the end the problem was the BT in the distoX, so we had to send it back to get a new one soldered on
Andrew Wookey wrote: > +++ marco corvi [2010-04-16 09:07 +0200]: >> On Fri, 2010-04-16 at 04:49 +0100, Wookey wrote: >> ... >>> Here is a calib file. This one had 2 legs missing so has couple of >>> extra 'downs' at the end. Not sure if that's fatal. If not could you >>> send me back a set of numbers >> hi wookey, >> >> attached are the calibration coeffs of your disto. >> calibration shots are well distributed over the directions. >> max error is about 0.5 deg. >> did not play to get it lower. > > Thanx Marco. Beat's article on how to do the sums has now been > published inthe CREG journal (I have a copy in front of me). So that > means you can release the code and include it in topolinux. > > I had some trouble getting bluetooth to work with the distoX and my > openmoko and then failed to get topolinux to run with the version of > stdlibc++ installed and actually talk to the bluetooth serial device, > so I took my netbook underground to experiment with instead, but then > failed to get bluetooth association even though it had been working > justfine the evening before. > > So I didn't get to try it underground usefully. But I can see that > some changes to the interface would be helpful. Hopefully I'll have > some more time to work on it in order to get it going usefully for this > summer's expo. > > Wookey
