⢠declination <specification> â set the default declination for all data objects in this survey (which can be overridden by declination definitions in subsurveys). The <specification> has three forms: 1. [] an empty string. This will reset the declination definition. 2. [<value> <units>] will set a single value (also for undated surveys). 3. [<date1> <value1> [<date2> <value2> ... ] <units>] will set declination for several dates. Then the declination of each shot will be set according to the date specification of the data object. If you want to explicitly set the declination for undated survey data, use â-â instead of date. 3 Note: itâs not possible to reference any object from the higher- level surveys. 14 If no declination is specified and some geodetic coordinate system is defined, the declination is automatically computed using built-in geomagnetic model. N.B.: The declination is positive when the magnetic north is east of true north.
So if you write declination 0 to particular survey it should work. m.s. On 1.11.2010, at 12:06, Graham Mullan wrote: > Therion appears to correct for mag deviation automatically, based on > the date that a survey was carried out. is it possible to turn this > feature off within specific surveys? I have much legacy data where > either the relevant correction has already been applied or where > they have recorded a "compass correction" which includes both > instrument error and mag deviation in one figure. > > Graham > -- > graham.mullan at coly.org.uk > > 0117 9502556 or 07887 637064 (or 0844 2327803) > _______________________________________________ > Therion mailing list > Therion at speleo.sk > http://mailman.speleo.sk/mailman/listinfo/therion
