I would probably just delete unnecessary shots and stations directly from XVI file. It is a simple text file. There are station names, you can use.
Regards, S. On 24 November 2011 19:48, Xavier Pennec <Xavier.Pennec at inria.fr> wrote: > > I have a cave which is quite complex and I would like to make elevations > with different projection angles. > My problem is that I cannot group all the shots for each elevation in > separate surveys, so that when I export the xvi sketch to draw my > elevations, I got all the stations and shots. I put below an example of the > big cloud of points that it makes in the xvi: this superimposition of all > the shots which will not be drawn in the elevation prevent from seeing the > stations and shots which should be drawn. Does anyone see a solution to > select only the stations/shots that I need? > So far, I duplicated the whole survey to keep only the points that I > needed, but this has to be done for each connected component independently, > which is not very easy. > > Xavier > > > > -- > > ------------------------- > > Xavier Pennec > > Senior Research Scientist / Directeur de recherche > > Asclepios project-team, INRIA Sophia-Antipolis > > 2004 Route des Lucioles, BP93 > > F-06902 Sophia-Antipolis Cedex, France > > +33 4 92 38 76 64 > > +33 6 78 35 16 90 > > http://www-sop.inria.fr/asclepios/ > > ------------------------------- > > > _______________________________________________ > Therion mailing list > Therion at speleo.sk > http://mailman.speleo.sk/mailman/listinfo/therion > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://mailman.speleo.sk/pipermail/therion/attachments/20111202/edec3187/attachment.html>
