Well, this is issue of outline scanning algorithm. Adding invisible wall: line wall:invisible 5036.0 1371.0 4832.0 1298.0 endline
Solves the problem. Therion very often has problems correctly connecting outline, if there are short wall lines and relatively long gaps between them. Adding invisible line there always solves the problem. HTH, S. On 26 February 2011 09:43, Andrew Atkinson <andrew at wotcc.org.uk> wrote: > Not from footleg, but here is one I have not solved yet, probably something > to do with the high level passage coming in at the end of scrap one, > separate survey > > > On 25/02/11 17:49, lada at blazcata.cz wrote: > >> If you can send me your data I can help you with debugging. Otherwise it >> is hard to say what is wrong. >> Odesláno z mého bezdrátového zaÅÃzenà BlackBerry(R) >> >> -----Original Message----- >> From: Footleg<drfootleg at gmail.com> >> Sender: therion-bounces at speleo.sk >> Date: Fri, 25 Feb 2011 17:08:25 >> To: List for Therion users<therion at speleo.sk> >> Reply-To: List for Therion users<therion at speleo.sk> >> Subject: Re: [Therion] Lox Model showing walls from wrong side >> >> _______________________________________________ >> Therion mailing list >> Therion at speleo.sk >> http://mailman.speleo.sk/mailman/listinfo/therion >> >> _______________________________________________ >> Therion mailing list >> Therion at speleo.sk >> http://mailman.speleo.sk/mailman/listinfo/therion >> > > _______________________________________________ > Therion mailing list > Therion at speleo.sk > http://mailman.speleo.sk/mailman/listinfo/therion > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://mailman.speleo.sk/pipermail/therion/attachments/20110226/b51a3bb0/attachment.html>
