The main problem is „overpointed“ lines with zillions of points - typical
problem of TopoDroid.
In new version of Therion there is new command for lines - „simplify“. It
should remove most of unnecessary points. When followed by command „Convert to
curve“ you should receive smooth lines with only several points. Enough for
good drawing and much, much, much faster.
Try another Android application - Qave.
>>> scrap outline intersects itself - it is only warning
m.s.
> 2. 7. 2017 v 18:02, Saeid Bostandoust via Therion <[email protected]>:
>
> Im resolve a problem with a simple hack...
> 1- duplicate topodroid scrap with topodroid survey.sql file now we have more
> than one scraps with same draw.
> 2- split a cave into small scraps on locations near to the stations and just
> wall around them.
> 3- remove not needed points, lines, areas and etc.
> 4- now we have a project with all of stations and more than one scraps with
> draw.
> After that metapost works good and export done without any errors but for now
> a scrap line intersects itself warning occurs and i look for solution for
> resolve it.
> This is a best simple way i think for split a sketch and your drawing...
> Thanks, Saeid.
>
>
> On Sunday, July 2, 2017 8:27 PM, Saeid Bostandoust <[email protected]> wrote:
>
>
> Im resolve a problem with a simple hack...
> 1- duplicate topodroid scrap with topodroid survey.sql file now we have more
> than one scraps with same draw.
> 2- split a cave into small scraps on locations near to the stations and just
> wall around them.
> 3- remove not needed points, lines, areas and etc.
> 4- now we have a project with all of stations and more than one scraps with
> draw.
> This is a best simple way i think for split a sketch and your drawing...
> Thanks, Saeid.
>
>
>
> On Sunday, July 2, 2017 1:04 PM, Martin Sluka <[email protected]> wrote:
>
>
> Send me your files please. I'll chect it at evening - it is half past 10 a.m.
> here.
>
> Odesláno z iPhonu
>
> 2. 7. 2017 v 10:30, Saeid Bostandoust <[email protected]
> <mailto:[email protected]>>:
>
>> Im check it, all of my points, lines and etc... between scrap and endscarp
>> and all of my design between cave walls
>> but a problem not resolve.
>>
>>
>> On Sunday, July 2, 2017 12:44 PM, Martin Sluka via Therion
>> <[email protected] <mailto:[email protected]>> wrote:
>>
>>
>> An scrap is a unit from which all Therion's output are created.
>>
>> So all objects of particular scrap MUST be between lines scrap - endsrap in
>> th2 files. Of they are outside, they will not be drawn.
>>
>> It is not simple work, all active objects of an active scrap are in blue. On
>> top right corner of map editor is a window where is structure of your th2
>> file. Above it are buttons for selecting different parts of overall th2
>> file. Select the particular scrap by that button and check on map window if
>> everything of that scrap is selected. If not check the line number of
>> endscrap command of that scrap. There is a button "Move to" just bellow of
>> window with th2 structure. Write there line number of endscrap, select
>> missing objects on by one and press "Move to".
>>
>> Repeat it untill all objects will be in their particular scraps.
>>
>> Sorry, but no more simple way.
>>
>> Recommendation: Create small scraps from beginning.
>>
>> m.s.
>>
>> Odesláno z iPhonu
>>
>> 2. 7. 2017 v 9:20, Saeid Bostandoust via Therion <[email protected]
>> <mailto:[email protected]>>:
>>
>>> Im resolve the problem by split my scrap into small scraps but another
>>> problems occurs.
>>> 1- scrap outline intersects itself
>>> 2- most of pit lines, slope lines, rock-border lines and etc... not
>>> exported to pdf
>>> What should i do?
>>>
>>> ####################### metapost log file ########################
>>> This is MetaPost, version 1.209 (kpathsea version 5.1.0) (mem=mpost
>>> 2010.01.31) 2 JUL 2017 09:52
>>> **data.mp
>>> (./data.mp [4001] [4002] [4003] [4004] [4005] [4006] [4007] [4008] [4009]
>>> [4010
>>> ] [4011] [4012] [4013]
>>> [1] [2]
>>> [Warning: scrap outline intersects itself in scrap Cave-Plan4@Shapur]
>>> [Warning: scrap outline intersects itself in scrap Cave-Plan4@Shapur] [3]
>>> [4] [5] [6] [7] [8]
>>> [Warning: scrap outline intersects itself in scrap Cave-Plan2@Shapur] [9]
>>> [10] [11]
>>> [Warning: scrap outline intersects itself in scrap Cave-Plan1@Shapur] [12]
>>> [13] [14] (./mptextmp.mp) [15] )
>>>
>>>
>>> On Sunday, July 2, 2017 10:31 AM, Saeid Bostandoust via Therion
>>> <[email protected] <mailto:[email protected]>> wrote:
>>>
>>>
>>> Thanks for answering.
>>> I found the problem nearly, my project plan is very large and a th2 file of
>>> plan is about 23000 lines, im delete most of lines and reduce it to near
>>> 5000 lines and all done without errors... what should i do now?
>>> maybe 23000 lines cannot be parsed and processed with metapost...
>>>
>>>
>>> On Sunday, July 2, 2017 6:55 AM, michael brewer via Therion
>>> <[email protected] <mailto:[email protected]>> wrote:
>>>
>>>
>>> Hi
>>> I had this error recently and solved it by changing the scale of the output
>>> from 1 500 to 1 1000. I assumed my output was exceeding the size allowable
>>> for the pdf document?
>>>
>>> Michael
>>>
>>> From: Therion [mailto:[email protected]
>>> <mailto:[email protected]>] On Behalf Of Saeid Bostandoust via
>>> Therion
>>> Sent: Sunday, July 2, 2017 8:56 AM
>>> To: List for Therion users
>>> Cc: Saeid Bostandoust
>>> Subject: Re: [Therion] Metapost exit code -- 2
>>>
>>> Thanks Bruce, but i dont understand how can i found the problem and what is
>>> that realy...
>>>
>>> On Sunday, July 2, 2017 12:26 AM, Bruce Mutton via Therion
>>> <[email protected] <mailto:[email protected]>> wrote:
>>>
>>> Saeid
>>> Try this
>>> https://therion.speleo.sk/wiki/faq#what_does_error_--_cp_exit_code_--_2_mean
>>>
>>> <https://therion.speleo.sk/wiki/faq#what_does_error_--_cp_exit_code_--_2_mean>
>>>
>>> Bruce
>>>
>>> From: Therion [mailto:[email protected]
>>> <mailto:[email protected]>] On Behalf Of Saeid Bostandoust via
>>> Therion
>>> Sent: Sunday, 2 July 2017 3:36 AM
>>> To: [email protected] <mailto:[email protected]>
>>> Cc: Saeid Bostandoust <[email protected] <mailto:[email protected]>>
>>> Subject: [Therion] Metapost exit code -- 2
>>>
>>> Hi, What is this exit code? and why it happen? and how to cor
>
>
>
>
> _______________________________________________
> Therion mailing list
> [email protected] <mailto:[email protected]>
> https://mailman.speleo.sk/listinfo/therion
> <https://mailman.speleo.sk/listinfo/therion>
_______________________________________________
Therion mailing list
[email protected]
https://mailman.speleo.sk/listinfo/therion
