Can you send your data files?
Rodrigo 2017-07-01 0:42 GMT-03:00 Bruce Mutton via Therion <[email protected]>: > Curious > > I am having the problem I described about 4 years ago on this forum. > > > > https://www.mail-archive.com/[email protected]/msg04547.html > > > > Not absolutely sure it ever went away, I think it did, it must have, but it > is back again. > > > > I only get cave-list outputs (.html and .kml) if I don’t select any survey > for export (ie rely on the default that selects all surveys). > > > > If I do select a survey (in this case the only survey at this level of the > dataset) before the export statement, I get an empty cave-list.html and no > cave-list.kml is produced. > > I also get this warning, in the (modified) log file statements as below: > > The coordinate system cs and coordinates must be OK, as the plan.kml is > created perfectly in both scenarios. > > > > > > … > > #################### end of cavern log file #################### > > done > > calculating basic statistics ... done > > processing extended elevation ... done > > processing references ... done > > selecting export objects ... done > > writing ../Output/NiagaraSurveyList.html ... done > > writing ../Output/NiagaraContinuations.html ... done > > writing ../Output/NiagaraCaveList.html ... done > > writing ../Output/NiagaraCaveList.kml ... > > C:\Program Files (x86)\Therion\therion.exe: warning -- geographical > reference is not associated with table > > done > > > > processing projection plan ... done > > average distortion: 0.50% > > writing ../Output/NiagaraPlan.pdf ... > > processing projection none ... done > > … > > converting scraps ... done > > making map ... done > > … > > done > > processing projection elevation ... done > > writing ../Output/NiagaraElev020.pdf ... > > … > > converting scraps ... done > > making map ... done > > … > > done > > processing projection extended ... done > > writing ../Output/NiagaraElevEXT.pdf ... > > … > > converting scraps ... done > > making map ... done > > … > > done > > writing ../Output/NiagaraPlan.kml ... done > > writing ../Output/Niagara3DModel.kml ... done > > writing ../Output/Niagara3DModel.lox ...... done > > writing ../Output/Niagara3DModel.3d ... done > > writing ../Output/Niagara3DModel.lox ... > > … > > converting scraps ... done > > making map ... done > > … > > done > > writing ../Output/Niagara3DModel.3d ... done > > writing xtherion file ... done > > compilation time: 7 sec > > > > Am using: > > therion 5.4.1+88c8a06 (2017-05-18) > > Survex 1.2.27 > > > > Any ideas what might cause this? > > > > Bruce > > > > > > > _______________________________________________ > Therion mailing list > [email protected] > https://mailman.speleo.sk/listinfo/therion > _______________________________________________ Therion mailing list [email protected] https://mailman.speleo.sk/listinfo/therion
