Hi Vasily,
Thanks, it's not the definitive solution but it's a good trick.
The problem is really related to fix command. When I comment the "fix"
and "cs" commands in my survey , the displacement is not as big as
before (357000000 units). Now the sketch is in the upper xvi limit.
I have tested your trick in 4 extended elevation sketch, and it's OK for
3, for the 4º I have only tu displace -7m in Z dimension (fix station 0
0 -7).
The only minor problem with the trick is when you want put together the
4 sketch. With the plan sketch I can move manually the xvi to 0 0, and
all the sketch are moved to the right place. Now I have to move manually
every sketch to superpose with the original XVI without morphed sketch.
But you only have to do this one time, after the sketch and xvi
associated are good placed the next time you open the .th2 file.
Evaristo.
El 06/01/2018 a las 3:42, Vasily Vl. Suhachev via Therion escribió:
Hello
I found some trick to fix XVI wrong placement problem
On a dedicated XVI thconfig use such commands
source
centerline
fix [email protected] 0 0 0
endcenterline
endsource
Station to fix is should be upper station in current elevation XVI
Please test this workaround... I hope it is working
06.01.2018 02:03, Evaristo Quiroga via Therion пишет:
It's a program bug that wrong calculate the Y coordinate. To resolve
properly it has to be corrected by Therion programmers.
--
WBR, Vasily
_______________________________________________
Therion mailing list
[email protected]
https://mailman.speleo.sk/listinfo/therion
_______________________________________________
Therion mailing list
[email protected]
https://mailman.speleo.sk/listinfo/therion
