Bill, have you try to define an overall map in the highest survey and select it in thconfig?
Martin Odesláno z iPhonu 30. 10. 2019 v 0:14, Bill Gee <[email protected]>: > It wasn't even hard! That is, it was not hard AFTER I figured out how to do > it :-) Until then it was a pain ... > > There is one feature I have found that does not work. It has not annoyed me > enough yet to go looking for a solution. One of my four maps has a section > where two passages run pretty much the same way, one directly above the > other. In the single-cave map I handled this by setting the upper passage off > to the side. That does not come through to the group map. The two passages > are drawn on top of each other. > > There is probably some magic I could do with select and map commands to make > it happen. > > -- > Bill Gee > > > > On Tuesday, October 29, 2019 5:14:00 PM CDT Scott Falkingham wrote: > > Thanks for the quick responses. With Bill's examples, I was able to get it > > working. > > > > All I had to do was to switch from sourcing multiple .th files in the > > thconfig to sourcing a single master .th file with its own survey that > > input the individual .th files in it. Fantastic. > > > > Scott > > > > > > On Tue, 29 Oct 2019 at 07:01, Bill Gee <[email protected]> wrote: > > > > > I have done this, and it wasn't even hard! The attached files show how I > > > took four separate cave maps and combined them into one. > > > > > > > > > > > > -- > > > > > > Bill Gee > > > > > > > > > > > > > > > > > > > > > On Monday, October 28, 2019 11:24:21 PM CDT Scott Falkingham wrote: > > > > > > > Hi Folks, > > > > > > > > > > > > > > Is it supported to export a model of multiple caves to a single KML > > > > file? > > > > > > > When I attempt the export, the entrance placemarks of both caves show > > > > up, > > > > > > > but only the first sourced caves centerline is exported. Not only that, > > > > > > > all of the placemarks are grouped in a single folder. > > > > > > > > > > > > > > Conversely, exporting a cave-list of multiple caves to KML works as > > > > > > > expected, with both caves showing up in individual folders. > > > > > > > > > > > > > > Thanks. > > > > > > > > > > > > > > Scott > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > Therion mailing list > > > [email protected] > > > https://mailman.speleo.sk/listinfo/therion > > > > > > > > _______________________________________________ > Therion mailing list > [email protected] > https://mailman.speleo.sk/listinfo/therion _______________________________________________ Therion mailing list [email protected] https://mailman.speleo.sk/listinfo/therion
