Hmmm, even scraps extending far beyond a known station could cause a problem - usually, it is the case with steep passages. In your case, it looks like some outline problem.
Are you able to isolate such scrap and send me some minimalistic sample? Thanks, S. On Mon, 1 Feb 2021 at 20:10, Benedikt Hallinger <b...@hallinger.org> wrote: > Hi, thanks for responding, > > i have the problem only tested with the lox. > The red box fits nicely my selected data. > The survex file also is OK. > > Probably it's caused by artifacts, see screenshot. > Thats an old bug, and caused by some scraps extending far beyond a known > station (walls are marked unsurveyed). > > > Am 2021-02-01 19:52, schrieb Stacho Mudrak: > > Hi Beni, > > > > thanks for review. > > > > Are you having coloring problem with .lox file or .pdf map? > > > > I have tried on my dataset, but when I select whole cave - entire > > color range is used - from magenta to red. > > > > When I select just a part of the cave, coloring changes and the whole > > range is used for selected part. > > > > Does your red rectangle fit selected data or is it much bigger? If the > > latter is the case, there must be some artifacts still remaining - > > that were not removed with selection. Maybe some stations? Does this > > problem remain also with aven .3d export? > > > > It would be great if we could find this bug before therion goes to > > debian release. > > > > S. > > > > On Mon, 1 Feb 2021 at 10:17, Benedikt Hallinger <b...@hallinger.org> > > wrote: > > > >> Checked it, looks good for me (data selection, and pdf map printout > >> with > >> people showing up again), with one exception: > >> > >> - I source all of the cave's data. (ok) > >> - Then i select jsut a part of it. (ok) > >> - The lox output contains just the selected part (ok) > >> - The altitude coloring is all the same, despite having significant > >> altitude changes in the dataset. > >> The reason seems to be that the coloring is done according in > >> relation > >> to ALL the cave, not just the selected parts - in comparison to the > >> entire system the altitude difference is negligible, but i expected > >> the > >> lox to generate the altitude band according to the actual min/max > >> values > >> of the selected dataset. > >> > >> $ therion -v > >> therion 5.5.6 (2020-12-27) > >> - using Proj 7.2.1, compiled against 7.2.1 > >> > >> But: therion compile cdf201b5bf921 has the same behaviour. > >> > >> Am 2021-01-27 8:59, schrieb Benedikt Hallinger: > >>> I just did apt-get update, and see 5.5.6ds1-5 > >>> > >>> That is the old version, right? I do wait for 5.5.6ds1-6 ? > >>> > >>> > >>> Am 2021-01-26 16:16, schrieb Wookey: > >>>> On 2021-01-24 14:40 +0100, Benedikt Hallinger wrote: > >>>>> Wookey, when is this expected to appear in testing? > >>>>> I would test it > >>>> > >>>> It's there now. > >>>> > >>>> Wookey > >>>> _______________________________________________ > >>>> Therion mailing list > >>>> Therion@speleo.sk > >>>> https://mailman.speleo.sk/listinfo/therion > >>> _______________________________________________ > >>> Therion mailing list > >>> Therion@speleo.sk > >>> https://mailman.speleo.sk/listinfo/therion > >> _______________________________________________ > >> Therion mailing list > >> Therion@speleo.sk > >> https://mailman.speleo.sk/listinfo/therion > > _______________________________________________ > > Therion mailing list > > Therion@speleo.sk > > https://mailman.speleo.sk/listinfo/therion > _______________________________________________ > Therion mailing list > Therion@speleo.sk > https://mailman.speleo.sk/listinfo/therion >
_______________________________________________ Therion mailing list Therion@speleo.sk https://mailman.speleo.sk/listinfo/therion
