Hi guys, I’m digging this topic since I’m running in a similar issue. Would that be possible to have for the points with the option “altitude" something like : 640 [-30], where 640 would be the altitude and -30 the depth ?
Thanks, Phil > On 14 Mar 2019, at 17:38, Xavier Robert via Therion <[email protected]> wrote: > > Hi all, > > I think I have found a trick. The other Xavier led me to the right tracks, > thanks a lot ! > > Finally, this is quite simple with the point altitude, and no need to change > anything inside the : > - If we use the point altitude only with the option -align, we get the > altitude > - If we use the point altitude with the options -align and -value [-1004 m] > where 1004 is the altitude of the main entrance, we print the depth only for > that point (Do not forget the "-" before the altitude of the main entrance), > and thus, we do not erase the classic point altitude. > > The only (small) limits are : > If the main entrance changes, we need to manually update ALL the points that > print the depth. But that should not be be everyday, and not a big issue to > do that. > the symbology of the two points is the same. I will have a look for a way to > modify that and let you know if I find a trick (If I copy the code of the > point Altitude, and call it p_u_depth(expr pos, R, S, A), it crashes...). > > Cheers, > > Xav > > _______________________________________________ > Therion mailing list > [email protected] > https://mailman.speleo.sk/listinfo/therion
_______________________________________________ Therion mailing list [email protected] https://mailman.speleo.sk/listinfo/therion
