Thanks Geoff. I think I've found the culprit - you've got additional WHERE clauses in your index definition of dead IS NULL and image_attempts = 1, yet neither of those are true in the SQL INSERT when the product is created. That'd be why the indexer isn't picking up your new records. Best to either remove those conditions, or ensure the expected values are covered by them.
Cheers -- Pat On 05/01/2013, at 11:59 AM, geoffw8 wrote: > Hey Pat > > https://gist.github.com/4d62474260ceaa42f6f6 > > There ya go. Thats the dev config... Let me know if you need anything else. > > Thanks again for this! > > Regards > > Geoff > > On Friday, January 4, 2013 2:45:14 AM UTC, Pat Allan wrote: > Hi Geoff > Sounds like you're doing everything right. Can you add your Sphinx > configuration file to that gist - though you should remove any database > usernames and passwords from the sources. > > -- > Pat > > > On 04/01/2013, at 1:39 PM, geoffw8 wrote: > > > Hi Pat, > > > > Woops, my bad. Here's a link to a gist after I rebuilt: > > https://gist.github.com/9a6e0127491b48173416 > > > > Let me make sure I'm getting this right. So I did the migration, added > > "set_property :delta => true" into my index block and rebuilt. > > > > What I do is delete all the records from our database - rebuild so the > > index is empty and we have no results - and start redownloading the > > products into the database - what I would expect without typing rake > > ts:index (or giving ANY additional command) is for the products to be > > immediately available. Is this the correct workflow? > > > > I did just go through this again (on a new laptop) and it hasn't worked > > again, and the delta value is marked as 1 for all the products. > > > > Arghh! Its driving me mad. Would appreciate any pointers...! > > > > Thanks, > > > > Geoff > > > > > > > > On Thursday, January 3, 2013 8:26:21 AM UTC, Pat Allan wrote: > > Hi Geoff > > This is different in the Sphinx output - but I guess you may have disabled > > deltas at some point in the meantime? > > > WARNING: no such index 'product_delta', skipping. > > > > Run ts:rebuild and give it another spin, just to confirm. > > > > -- > > Pat > > > > On 03/01/2013, at 1:23 AM, geoffw8 wrote: > > > > > Hi Pat > > > > > > (Can't believe I didn't see this, I was just writing a new post!!) > > > > > > Yes, the delta flag for the product was set to true (1 in the db). > > > > > > I am using version 2.0.13 of TS and Sphinx 2.0.6-release (r3473) > > > > > > Here is the full output: > > > > > > Product Load (0.8ms) SELECT `products`.* FROM `products` WHERE (guid = > > > '1411077050' AND feed_id = 2) LIMIT 1 > > > Brand Load (0.6ms) SELECT `brands`.* FROM `brands` WHERE > > > `brands`.`name` = 'Schuh' LIMIT 1 > > > (0.1ms) BEGIN > > > SQL (2.5ms) INSERT INTO `products` (`additional_data_1`, > > > `additional_data_2`, `additional_data_3`, `brand`, `category_id`, > > > `colour_id`, `cost_id`, `created_at`, `dead`, `deeplink`, `delta`, > > > `description`, `feed_id`, `feed_log_id`, `gender_id`, `get_photo_status`, > > > `guid`, `image`, `image_attempts`, `is_duplicate`, `last_checked`, > > > `merchant_link`, `name`, `old_prices`, `parent_id`, `pattern_id`, > > > `permalink`, `photo_content_type`, `photo_file_name`, `photo_file_sze`, > > > `photo_updated_at`, `photograph_id`, `price`, `processed`, `rank`, > > > `sale`, `sale_on`, `subcategory_id`, `tags`, `updated_at`) VALUES > > > ('Womens Footwear', 'Women\'s Footwear', NULL, 'Schuh', NULL, NULL, NULL, > > > '2013-01-02 14:17:08', 0, > > > 'http://www.awin1.com/pclick.php?p=696651025&a=93579&m=2044', 1, 'Youll > > > get more attention showing these off than sticking your thumb out! The > > > Hitch Hike is one of our own and features a black suede upper and two > > > functional buckles. This tough little ankle boot sits on a 6cm heel and a > > > cleated sole.', 2, 13125, NULL, NULL, '1411077050', > > > 'http://www.schuh.co.uk/images/product/141107/1411077050_exlg.jpg', NULL, > > > NULL, NULL, > > > 'http://www.schuh.co.uk/womens-black-schuh-hitch-hike/1411077050/', > > > 'Schuh Hitch Hike', NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, > > > '85.00', NULL, NULL, 0, NULL, NULL, NULL, '2013-01-02 14:17:08') > > > Feed Load (1.0ms) SELECT `feeds`.* FROM `feeds` WHERE `feeds`.`id` = 2 > > > LIMIT 1 > > > Category Load (0.5ms) SELECT `categories`.* FROM `categories` WHERE > > > `categories`.`id` IS NULL LIMIT 1 > > > Subcategory Load (0.5ms) SELECT `subcategories`.* FROM `subcategories` > > > WHERE `subcategories`.`id` IS NULL LIMIT 1 > > > (2.4ms) COMMIT > > > Sphinx 2.0.6-release (r3473) > > > Copyright (c) 2001-2012, Andrew Aksyonoff > > > Copyright (c) 2008-2012, Sphinx Technologies Inc (http://sphinxsearch.com) > > > > > > using config file > > > '/Users/geoffmwright/Documents/rails/WTL2/config/development.sphinx.conf'... > > > WARNING: no such index 'product_delta', skipping. > > > total 0 reads, 0.000 sec, 0.0 kb/call avg, 0.0 msec/call avg > > > total 0 writes, 0.000 sec, 0.0 kb/call avg, 0.0 msec/call avg > > > Sphinx Query (3.9ms) > > > Sphinx Found 0 results > > > > > > And I just checked in the db, and this product does have delta set to 1 > > > > > > Any ideas on where to look first? Its not working on my local, or prod > > > environments. > > > > > > Thanks for your help all, its much appreciated > > > > > > Kind regards, > > > > > > Geoff > > > > > > On Sunday, December 23, 2012 1:13:34 AM UTC, Pat Allan wrote: > > > Hi Geoff > > > You omitted the data for the new product - can you confirm that the delta > > > flag was set to true there? Also, what version of Thinking Sphinx are you > > > using? > > > > > > Cheers > > > > > > -- > > > Pat > > > > > > On 16/12/2012, at 1:04 PM, geoffw8 wrote: > > > > > > > Hey, so I am having this EXACT issue and when I run the shell command I > > > > get: > > > > > > > > gw:WTL2 gwt$ search --config config/development.sphinx.conf -i > > > > product_delta top > > > > Sphinx 2.0.4-release (r3135) > > > > Copyright (c) 2001-2012, Andrew Aksyonoff > > > > Copyright (c) 2008-2012, Sphinx Technologies Inc > > > > (http://sphinxsearch.com) > > > > > > > > using config file 'config/development.sphinx.conf'... > > > > index 'product_delta': search error: . > > > > > > > > All seems to be well coming in: > > > > > > > > Product Load (1.3ms) SELECT `products`.* FROM `products` WHERE (guid = > > > > 'BLFA1176M1851' AND feed_id = 1) LIMIT 1 > > > > Brand Load (0.4ms) SELECT `brands`.* FROM `brands` WHERE > > > > `brands`.`name` = 'Bench' LIMIT 1 > > > > (0.1ms) BEGIN > > > > SQL (0.6ms) INSERT INTO `products` (`data omitted') > > > > Feed Load (0.5ms) SELECT `feeds`.* FROM `feeds` WHERE `feeds`.`id` = > > > > 1 LIMIT 1 > > > > Category Load (0.2ms) SELECT `categories`.* FROM `categories` WHERE > > > > `categories`.`id` IS NULL LIMIT 1 > > > > Subcategory Load (0.2ms) SELECT `subcategories`.* FROM > > > > `subcategories` WHERE `subcategories`.`id` IS NULL LIMIT 1 > > > > (0.4ms) COMMIT > > > > Sphinx 2.0.4-release (r3135) > > > > Copyright (c) 2001-2012, Andrew Aksyonoff > > > > Copyright (c) 2008-2012, Sphinx Technologies Inc > > > > (http://sphinxsearch.com) > > > > > > > > using config file > > > > '/Users/geoffwright/Documents/rails/WTL2/config/development.sphinx.conf'... > > > > indexing index 'product_delta'... > > > > collected 0 docs, 0.0 MB > > > > collected 0 attr values > > > > sorted 0.0 Mvalues, 100.0% done > > > > total 0 docs, 0 bytes > > > > total 0.014 sec, 0 bytes/sec, 0.00 docs/sec > > > > total 5 reads, 0.000 sec, 25.5 kb/call avg, 0.0 msec/call avg > > > > total 5 writes, 0.000 sec, 0.2 kb/call avg, 0.0 msec/call avg > > > > rotating indices: succesfully sent SIGHUP to searchd (pid=1488). > > > > Sphinx Query (2.1ms) > > > > Sphinx Found 0 results > > > > > > > > > > > > Any ideas what I might be doing wrong? I'd have thought collected > > > > should be > 0 > > > > > > > > Cheers > > > > > > > > Geoff > > > > > > > > On Thursday, November 17, 2011 3:55:22 AM UTC, Strafe wrote: > > > > Ooohh, okay. > > > > > > > > On Wed, Nov 16, 2011 at 10:39 PM, Pat Allan <[email protected]> > > > > wrote: > > > > We have a confusion of terms here… > > > > > > > > On a *nix box the shell I'm talking about would be bash, zsh, etc. On > > > > Windows, I guess it's cmd.exe? > > > > > > > > On 17/11/2011, at 10:37 AM, Benjamin Zumhagen wrote: > > > > > > > > > I ran that command in the IRB shell > > > > > > > > > > On Wed, Nov 16, 2011 at 9:08 PM, Pat Allan > > > > > <[email protected]> wrote: > > > > > You need to run this command in your shell, not in script/console. > > > > > > > > > > -- > > > > > Pat > > > > > > > > > > On 16/11/2011, at 8:37 PM, Benjamin Zumhagen wrote: > > > > > > > > > > > This is what I get when I run that command. > > > > > > > > > > > > irb(main):006:0> search --config config/development.sphinx.conf -i > > > > > > hardware_delta dell > > > > > > SyntaxError: (irb):6: syntax error, unexpected tIDENTIFIER, > > > > > > expecting keyword_do or '{' or '(' > > > > > > search --config config/development.sphinx.conf -i hardware_delta > > > > > > dell > > > > > > ^ > > > > > > (irb):6: syntax error, unexpected tUMINUS, expecting $end > > > > > > search --config config/development.sphinx.conf -i hardware_delta > > > > > > dell > > > > > > ^ > > > > > > from > > > > > > C:/ruby192/lib/ruby/gems/1.9.1/gems/railties-3.0.9/lib/rails/commands/console.rb:44:in > > > > > > `start' > > > > > > from > > > > > > C:/ruby192/lib/ruby/gems/1.9.1/gems/railties-3.0.9/lib/rails/commands/console.rb:8:in > > > > > > `start' > > > > > > from > > > > > > C:/ruby192/lib/ruby/gems/1.9.1/gems/railties-3.0.9/lib/rails/commands.rb:23:in > > > > > > `<top (required)>' > > > > > > from script/rails:6:in `require' > > > > > > from script/rails:6:in `<main>' > > > > > > > > > > > > On Wed, Nov 16, 2011 at 5:36 AM, Pat Allan > > > > > > <[email protected]> wrote: > > > > > > I'm afraid I don't know what the cause of the problem is here… it > > > > > > looks like you don't even have 20 records, so it's not a matter of > > > > > > pagination getting in the way… the delta processing happens, the > > > > > > new record seems to be recorded in it. > > > > > > > > > > > > What happens if you run - from the command line - a manual search: > > > > > > search --config config/development.sphinx.conf -i hardware_delta > > > > > > dell > > > > > > > > > > > > Does it get returned? > > > > > > > > > > > > -- > > > > > > Pat > > > > > > > > > > > > On 14/11/2011, at 8:34 PM, Strafe wrote: > > > > > > > > > > > > > Creating Record > > > > > > > > > > > > > > irb(main):003:0> Hardware.create(:equipment_manufacturer => > > > > > > > "Dell", :equipment_model => "1337", :serial_number => "12345678") > > > > > > > Sphinx 2.0.1-beta (r2792) > > > > > > > Copyright (c) 2001-2011, Andrew Aksyonoff > > > > > > > Copyright (c) 2008-2011, Sphinx Technologies Inc (http:// > > > > > > > sphinxsearch.com) > > > > > > > > > > > > > > using config file 'C:/ruby192/project/config/ > > > > > > > development.sphinx.conf'... > > > > > > > indexing index 'hardware_delta'... > > > > > > > WARNING: collect_hits: mem_limit=0 kb too low, increasing to > > > > > > > 14592 kb > > > > > > > collected 1 docs, 0.0 MB > > > > > > > sorted 0.0 Mhits, 100.0% done > > > > > > > total 1 docs, 16 bytes > > > > > > > total 0.029 sec, 551 bytes/sec, 34.46 docs/sec > > > > > > > total 2 reads, 0.000 sec, 0.0 kb/call avg, 0.0 msec/call avg > > > > > > > total 9 writes, 0.000 sec, 0.1 kb/call avg, 0.0 msec/call avg > > > > > > > rotating indices: succesfully sent SIGHUP to searchd (pid=7588). > > > > > > > => #<Hardware id: 11, equipment_model: "1337", serial_number: > > > > > > > "12345678", equipment_building: nil, equipment_loca > > > > > > > tion: nil, delta: true, created_at: "2011-11-14 13:20:37", > > > > > > > updated_at: > > > > > > > "2011-11-14 13:20:37", equipment_manufacturer: "Dell"> > > > > > > > > > > > > > > Then I run a Hardware.search with no parameters and it doesnt > > > > > > > show up. > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Nov 11, 7:11 am, Pat Allan <[email protected]> wrote: > > > > > > >> If you have deltas defined, then the indexing should happen > > > > > > >> already - you don't need to run define_indexes or index_delta. > > > > > > >> > > > > > > >> Can you show us what data you're using in the new record, and > > > > > > >> what your test search query is? > > > > > > >> > > > > > > >> -- > > > > > > >> Pat > > > > > > >> > > > > > > >> On 11/11/2011, at 12:43 AM, Strafe wrote: > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >>> Step 1. I have premade records which are indexed initially. > > > > > > >> > > > > > > >>> irb(main):001:0> Hardware.last > > > > > > >>> => #<Hardware id: 3, [...] delta: false > > > > > > > >> > > > > > > >>> Step 2. I create a new record > > > > > > >> > > > > > > >>> irb(main):001:0> Hardware.last > > > > > > >>> => #<Hardware id: 4, [...] delta: true > > > > > > > >> > > > > > > >>> Step 3. I checked for defined indexes > > > > > > >> > > > > > > >>> irb(main):003:0> Hardware.define_indexes > > > > > > >>> => true > > > > > > >> > > > > > > >>> Step 4. I check out delta index > > > > > > >> > > > > > > >>> irb(main):004:0> Hardware.index_delta > > > > > > >>> Sphinx 2.0.1-beta (r2792) > > > > > > >>> Copyright (c) 2001-2011, Andrew Aksyonoff > > > > > > >>> Copyright (c) 2008-2011, Sphinx Technologies Inc (http:// > > > > > > >>> sphinxsearch.com) > > > > > > >> > > > > > > >>> using config file 'C:/ruby192/cec_inventory/config/ > > > > > > >>> development.sphinx.conf'... > > > > > > >>> indexing index 'hardware_delta'... > > > > > > >>> WARNING: collect_hits: mem_limit=0 kb too low, increasing to > > > > > > >>> 14592 kb > > > > > > >>> collected 1 docs, 0.0 MB > > > > > > >>> sorted 0.0 Mhits, 100.0% done > > > > > > >>> total 1 docs, 18 bytes > > > > > > >>> total 0.060 sec, 295 bytes/sec, 16.44 docs/sec > > > > > > >>> total 2 reads, 0.000 sec, 0.0 kb/call avg, 0.0 msec/call avg > > > > > > >>> total 9 writes, 0.000 sec, 0.1 kb/call avg, 0.0 msec/call avg > > > > > > >>> rotating indices: succesfully sent SIGHUP to searchd (pid=1824). > > > > > > >>> => [#<ThinkingSphinx::Deltas::DefaultDelta:0x414b910 [........] > > > > > > >>> ] > > > > > > >> > > > > > > >>> Here is my define index block > > > > > > >> > > > > > > >>> define_index do > > > > > > >>> # fields > > > > > > >>> indexes equipment_manufacturer, :sortable => true > > > > > > >>> indexes equipment_model, :sortable => true > > > > > > >>> indexes serial_number > > > > > > >>> indexes equipment_building > > > > > > >>> indexes equipment_location > > > > > > >> > > > > > > >>> set_property :delta => true > > > > > > >>> has created_at, updated_at > > > > > > >>> end > > > > > > >> > > > > > > >>> Let me know if you need anything else. > > > > > > >> > > > > > > >>> On Nov 9, 9:58 pm, Pat Allan <[email protected]> wrote: > > > > > > >>>> Hi > > > > > > >> > > > > > > >>>> Could you run us through how you're testing the deltas in the > > > > > > >>>> command line? It's worth noting that Sphinx takes a second to > > > > > > >>>> load the new data, so don't run a search *straight* after > > > > > > >>>> creating a new object - I usually use `sleep 0.5` in my tests > > > > > > >>>> to account for this. > > > > > > >> > > > > > > >>>> Also, can you provide the full define_index block? > > > > > > >> > > > > > > >>>> Cheers > > > > > > >> > > > > > > >>>> -- > > > > > > >>>> Pat > > > > > > >> > > > > > > >>>> On 10/11/2011, at 4:22 AM, Strafe wrote: > > > > > > >> > > > > > > >>>>> I know this has been covered before, but I couldn't find > > > > > > >>>>> something in > > > > > > >>>>> the other documents which helped me, so I thought i'd make a > > > > > > >>>>> thread > > > > > > >>>>> here. > > > > > > >> > > > > > > >>>>> So im running Rails 3.0.9 on Ruby 1.9.2. > > > > > > >> > > > > > > >>>>> Thinking Sphinx worked great, then I decided I wanted to > > > > > > >>>>> implement > > > > > > >>>>> Delta Indexes. > > > > > > >> > > > > > > >>>>> So I added the column to my model > > > > > > >> > > > > > > >>>>> :delta, :boolean, :default => true, :null => false > > > > > > >> > > > > > > >>>>> Then I added the property to my model > > > > > > >> > > > > > > >>>>> define_index do > > > > > > >>>>> set_property :delta => true > > > > > > >>>>> end > > > > > > >> > > > > > > >>>>> Then I ran my migrations > > > > > > >> > > > > > > >>>>> Then I ran a rake ts:rebuild > > > > > > >> > > > > > > >>>>> Started my rails server, and everything seemed to be working. > > > > > > >> > > > > > > >>>>> However, when I create or destroy objects they do not appear > > > > > > >>>>> in the > > > > > > >>>>> search. > > > > > > >> > > > > > > >>>>> It would seem that everything is working fine, the delta > > > > > > >>>>> index is in > > > > > > >>>>> the model, it's set to true when I create a record. I see the > > > > > > >>>>> Sphinx > > > > > > >>>>> stuff in the console without errors when I create a record. > > > > > > >> > > > > > > >>>>> And when I run the index_delta command in the IRB it seems to > > > > > > >>>>> find all > > > > > > >>>>> the new records. > > > > > > >> > > > > > > >>>>>> Hardware.index_delta > > > > > > >>>>> Sphinx 2.0.1-beta (r2792) > > > > > > >>>>> Copyright (c) 2001-2011, Andrew Aksyonoff > > > > > > >>>>> Copyright (c) 2008-2011, Sphinx Technologies Inc (http:// > > > > > > >>>>> sphinxsearch.com) > > > > > > >> > > > > > > >>>>> using config file 'C:/ruby192/cec_inventory/config/ > > > > > > >>>>> development.sphinx.conf'... > > > > > > >>>>> indexing index 'hardware_delta'... > > > > > > >>>>> WARNING: collect_hits: mem_limit=0 kb too low, increasing to > > > > > > >>>>> 14592 kb > > > > > > >>>>> collected 2 docs, 0.0 MB > > > > > > >>>>> sorted 0.0 Mhits, 100.0% done > > > > > > >>>>> total 2 docs, 31 bytes > > > > > > >>>>> total 0.038 sec, 803 bytes/sec, 51.86 docs/sec > > > > > > >>>>> total 2 reads, 0.000 sec, 0.0 kb/call avg, 0.0 msec/call avg > > > > > > >>>>> total 9 writes, 0.000 sec, 0.1 kb/call avg, 0.0 msec/call avg > > > > > > >>>>> rotating indices: succesfully sent SIGHUP to searchd > > > > > > >>>>> (pid=7772). > > > > > > >>>>> [delta index stuff here] > > > > > > >> > > > > > > >>>>> Even if i run a ts:reindex when the searchd is running, it > > > > > > >>>>> doesnt find > > > > > > >>>>> the new records, it only set's their delta to false. They > > > > > > >>>>> don't show > > > > > > >>>>> up. The only way I can get them to show is if I run a > > > > > > >>>>> ts:rebuild. > > > > > > >> > > > > > > >>>>> Can you guys help me? Sorry If i accidentally left out some > > > > > > >>>>> details. > > > > > > >> > > > > > > >>>>> -- > > > > > > >>>>> You received this message because you are subscribed to the > > > > > > >>>>> Google Groups "Thinking Sphinx" group. > > > > > > >>>>> To post to this group, send email to > > > > > > >>>>> [email protected]. > > > > > > >>>>> To unsubscribe from this group, send email to > > > > > > >>>>> [email protected]. > > > > > > >>>>> For more options, visit this group > > > > > > >>>>> athttp://groups.google.com/group/thinking-sphinx?hl=en. > > > > > > >> > > > > > > >>> -- > > > > > > >>> You received this message because you are subscribed to the > > > > > > >>> Google Groups "Thinking Sphinx" group. > > > > > > >>> To post to this group, send email to > > > > > > >>> [email protected]. > > > > > > >>> To unsubscribe from this group, send email to > > > > > > >>> [email protected]. > > > > > > >>> For more options, visit this group > > > > > > >>> athttp://groups.google.com/group/thinking-sphinx?hl=en. > > > > > > > > > > > > > > -- > > > > > > > You received this message because you are subscribed to the > > > > > > > Google Groups "Thinking Sphinx" group. > > > > > > > To post to this group, send email to [email protected]. > > > > > > > To unsubscribe from this group, send email to > > > > > > > [email protected]. > > > > > > > For more options, visit this group at > > > > > > > http://groups.google.com/group/thinking-sphinx?hl=en. > > > > > > > > > > > > > > > > > > > -- > > > > > > You received this message because you are subscribed to the Google > > > > > > Groups "Thinking Sphinx" group. > > > > > > To post to this group, send email to [email protected]. > > > > > > To unsubscribe from this group, send email to > > > > > > [email protected]. > > > > > > For more options, visit this group at > > > > > > http://groups.google.com/group/thinking-sphinx?hl=en. > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > You received this message because you are subscribed to the Google > > > > > > Groups "Thinking Sphinx" group. > > > > > > To post to this group, send email to [email protected]. > > > > > > To unsubscribe from this group, send email to > > > > > > [email protected]. > > > > > > For more options, visit this group at > > > > > > http://groups.google.com/group/thinking-sphinx?hl=en. > > > > > > > > > > -- > > > > > You received this message because you are subscribed to the Google > > > > > Groups "Thinking Sphinx" group. > > > > > To post to this group, send email to [email protected]. > > > > > To unsubscribe from this group, send email to > > > > > [email protected]. > > > > > For more options, visit this group at > > > > > http://groups.google.com/group/thinking-sphinx?hl=en. > > > > > > > > > > > > > > > > > > > > -- > > > > > You received this message because you are subscribed to the Google > > > > > Groups "Thinking Sphinx" group. > > > > > To post to this group, send email to [email protected]. > > > > > To unsubscribe from this group, send email to > > > > > [email protected]. > > > > > For more options, visit this group at > > > > > http://groups.google.com/group/thinking-sphinx?hl=en. > > > > > > > > -- > > > > You received this message because you are subscribed to the Google > > > > Groups "Thinking Sphinx" group. > > > > To post to this group, send email to [email protected]. > > > > To unsubscribe from this group, send email to > > > > [email protected]. > > > > For more options, visit this group at > > > > http://groups.google.com/group/thinking-sphinx?hl=en. > > > > > > > > > > > > > > > > -- > > > > You received this message because you are subscribed to the Google > > > > Groups "Thinking Sphinx" group. > > > > To view this discussion on the web visit > > > > https://groups.google.com/d/msg/thinking-sphinx/-/yQzDyqDPR3cJ. > > > > To post to this group, send email to [email protected]. > > > > To unsubscribe from this group, send email to > > > > [email protected]. > > > > For more options, visit this group at > > > > http://groups.google.com/group/thinking-sphinx?hl=en. > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > You received this message because you are subscribed to the Google Groups > > > "Thinking Sphinx" group. > > > To view this discussion on the web visit > > > https://groups.google.com/d/msg/thinking-sphinx/-/eGZsYthFdacJ. > > > To post to this group, send email to [email protected]. > > > To unsubscribe from this group, send email to > > > [email protected]. > > > For more options, visit this group at > > > http://groups.google.com/group/thinking-sphinx?hl=en. > > > > > > > > > > > > > > > > > > -- > > You received this message because you are subscribed to the Google Groups > > "Thinking Sphinx" group. > > To view this discussion on the web visit > > https://groups.google.com/d/msg/thinking-sphinx/-/IVzzLxsn6aYJ. > > To post to this group, send email to [email protected]. > > To unsubscribe from this group, send email to > > [email protected]. > > For more options, visit this group at > > http://groups.google.com/group/thinking-sphinx?hl=en. > > > > > > > > -- > You received this message because you are subscribed to the Google Groups > "Thinking Sphinx" group. > To view this discussion on the web visit > https://groups.google.com/d/msg/thinking-sphinx/-/cxGroG3ceWEJ. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/thinking-sphinx?hl=en. -- You received this message because you are subscribed to the Google Groups "Thinking Sphinx" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/thinking-sphinx?hl=en.
