Heya

Thanks alot, sorry, misread before :-) I will check when I'm off work, I 
only have access from home. I assume they are both the latest, 2.1.4.

- There is no encoding set in either database environment in database.yml - 
should I set it?

- I will change my deploy and cron(rake task) aswell

Thanks


Den tirsdag den 8. april 2014 08.56.58 UTC+2 skrev Pat Allan:
>
> Hi Daniel
>
> Thanks for those details - all useful, but one more bit of detail may be 
> helpful: what version of *Sphinx* (not Thinking Sphinx) is installed in 
> each environment? Best to make sure they’re the same (and, ideally, 2.1.4 
> or newer on both machines).
>
> However, my thinking is as follows:
> * You likely have encoding set to utf8 in your config/database.yml file 
> for your development environment. You’ll want to set this for your 
> production environment as well.
> * You only need to run the ts:rebuild task when your index structure 
> changes (it’s the equivalent of db:migrate) - and ts:rebuild stops and 
> starts your Sphinx daemon, which is likely why you’ve seen some ‘no enabled 
> local indexes’ errors. Change your cron task to just the ts:index instead, 
> which will avoid restarting the daemon.
>
> Cheers
>
> — 
> Pat
>
> On 8 Apr 2014, at 4:39 pm, Daniel Gottschalck <[email protected]<javascript:>> 
> wrote:
>
> Hi Pat
>
> Thanks for your response.
>
> Both environments are using latest Thinking Sphinx gem '3.1.0' - along 
> with MySQL - and mysql2 gem (latest)
>
> I have a whenever cron task, to run ts:rebuild at 12pm every day.
>
> Den tirsdag den 8. april 2014 00.46.26 UTC+2 skrev Pat Allan:
>>
>> What database and what version of Sphinx are you using locally? And what 
>> about on production?
>>
>> Also: do you have any cron tasks set up that involve Sphinx/Thinking 
>> Sphinx?
>>
>> On 8 Apr 2014, at 5:16 am, Daniel Gottschalck <[email protected]> wrote:
>>
>> Hi
>>
>>
>> Ive implemented Thinking Sphinx on a site.
>>
>> The search functionality works fine in development on my MacBook Pro OSX 
>> 10.9.2.
>>
>> I can do search with æ,ø,å letters and results will show just fine. The 
>> search I do is with city names "Århus, Værløse, Allerød".
>>
>>
>> But when I try with the same letters on the remote server which is Ubuntu 
>> 12.04, Apache/Passenger setup, it wont return any results at all.
>>
>>
>> I can search with any other english letter: a-y
>>
>>
>> I received this error sometime aswell:
>>
>> Think​ingSp​hinx:​:Sphi​nxErr​or: n​o ena​bled ​local​ inde​xes t​o 
>> sea​rch *search#index*
>>
>>
>> rake ts:rebuild etc works just fine:
>>
>> indexing index 'refinery_wayfinders_club_core'...
>>>
>>> WARNING: collect_hits: mem_limit=0 kb too low, increasing to 13824 kb
>>>
>>> collected 75 docs, 0.0 MB
>>>
>>> sorted 0.0 Mhits, 100.0% done
>>>
>>> total 75 docs, 1781 bytes
>>>
>>> total 0.052 sec, 33804 bytes/sec, 1423.52 docs/sec
>>>
>>> indexing index 'refinery_page_core'...
>>>
>>> WARNING: collect_hits: mem_limit=0 kb too low, increasing to 13568 kb
>>>
>>> collected 10 docs, 0.0 MB
>>>
>>> sorted 0.0 Mhits, 100.0% done
>>>
>>> total 10 docs, 205 bytes
>>>
>>> total 0.030 sec, 6629 bytes/sec, 323.40 docs/sec
>>>
>>> indexing index 'refinery_wayfinders_project_core'...
>>>
>>> WARNING: collect_hits: mem_limit=0 kb too low, increasing to 14368 kb
>>>
>>> collected 189 docs, 0.0 MB
>>>
>>> collected 928 attr values
>>>
>>> sorted 0.0 Mvalues, 100.0% done
>>>
>>> sorted 0.0 Mhits, 100.0% done
>>>
>>> total 189 docs, 15852 bytes
>>>
>>> total 0.404 sec, 39155 bytes/sec, 466.83 docs/sec
>>>
>>> skipping non-plain index 'refinery_wayfinders_club'...
>>>
>>> skipping non-plain index 'refinery_page'...
>>>
>>> skipping non-plain index 'refinery_wayfinders_project'...
>>>
>>> total 1310 reads, 0.010 sec, 0.0 kb/call avg, 0.0 msec/call avg
>>>
>>> total 29 writes, 0.002 sec, 3.4 kb/call avg, 0.0 msec/call avg
>>>
>>> Started searchd successfully (pid: 21517).
>>>
>>
>>  
>> I tried adding a thinking_sphinx.yml config file with a charset_table 
>> with all the neccessary unicodes, then it wouldn't reindex at all.
>>
>> So, any suggestions?
>>
>> How can I get the production environment to allow the "æ,ø,å" characters 
>> so the search will work?
>>
>>
>> Thanks in advance
>>
>>
>> Regards
>>
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Thinking Sphinx" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to [email protected].
>> To post to this group, send email to 
>> thinkin...@googlegroups.<http://googlegroups.com/>
>> com <http://googlegroups.com/>.
>> Visit this group at http://groups.google.com/group/thinking-sphinx.
>> For more options, visit https://groups.google.com/d/optout.
>>
>>
>>
> -- 
> You received this message because you are subscribed to the Google Groups 
> "Thinking Sphinx" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to [email protected] <javascript:>.
> To post to this group, send email to [email protected]<javascript:>
> .
> Visit this group at http://groups.google.com/group/thinking-sphinx.
> For more options, visit https://groups.google.com/d/optout.
>
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"Thinking Sphinx" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To post to this group, send email to [email protected].
Visit this group at http://groups.google.com/group/thinking-sphinx.
For more options, visit https://groups.google.com/d/optout.

Reply via email to