#638: usb-storage script not working
-------------------------------------+--------------------------------------
Reporter: [EMAIL PROTECTED] | Owner:
Type: defect | Status: new
Priority: normal | Milestone:
Component: Problems with Debian | Version: initng-0.6.0
Severity: normal | Keywords:
-------------------------------------+--------------------------------------
On my debian sarge I have installed the usb-storage script from
http://wiki.kanotix.net/CoMa.php?CoMa=usb-storage to get in KDE an
automatic icon for plugged usb-devices. The script is located in
/etc/hotplug/usb/
If I plug in an usb-device after starting the system with sysvinit I find
in /var/log/messages
May 3 21:20:52 flori kernel: usb 3-5: new high speed USB device using
address 2
May 3 21:20:52 flori kernel: SCSI subsystem initialized
May 3 21:20:52 flori kernel: Initializing USB Mass Storage driver...
May 3 21:20:52 flori kernel: scsi0 : SCSI emulation for USB Mass Storage
devices
May 3 21:20:52 flori kernel: Vendor: Sony Model: Sony DSC
Rev: 4.50
May 3 21:20:52 flori kernel: Type: Direct-Access
ANSI SCSI revision: 02
May 3 21:20:52 flori usb.agent[7074]: usb-storage: loaded
successfully
May 3 21:20:52 flori kernel: usbcore: registered new driver usb-storage
May 3 21:20:52 flori kernel: USB Mass Storage support registered.
May 3 21:20:52 flori kernel: SCSI device sda: 253696 512-byte hdwr
sectors (130 MB)
May 3 21:20:52 flori kernel: sda: assuming Write Enabled
May 3 21:20:52 flori scsi.agent[7140]: sd_mod: loaded sucessfully
(for disk)
May 3 21:20:52 flori kernel: /dev/scsi/host0/bus0/target0/lun0: p1
May 3 21:20:52 flori kernel: Attached scsi removable disk sda at scsi0,
channel 0, id 0, lun 0
And then the icon appears.
Using initng /var/log/messages tells me
May 3 20:50:31 flori kernel: usb 3-5: new high speed USB device using
address 2
May 3 20:50:32 flori kernel: SCSI subsystem initialized
May 3 20:50:32 flori kernel: Initializing USB Mass Storage driver...
May 3 20:50:32 flori kernel: scsi0 : SCSI emulation for USB Mass Storage
devices
May 3 20:50:32 flori kernel: Vendor: Sony Model: Sony DSC Rev:
4.50
May 3 20:50:32 flori kernel: Type: Direct-Access ANSI SCSI revision:
02
May 3 20:50:32 flori kernel: usbcore: registered new driver usb-storage
May 3 20:50:32 flori kernel: USB Mass Storage support registered.
May 3 20:50:32 flori usb.agent[3777]: usb-storage: loaded
successfully
May 3 20:50:58 flori kernel: SCSI device sda: 253696 512-byte hdwr
sectors (130 MB)
May 3 20:50:58 flori kernel: sda: assuming Write Enabled
May 3 20:50:58 flori kernel: /dev/scsi/host0/bus0/target0/lun0: p1
May 3 20:50:58 flori kernel: Attached scsi removable disk sda at scsi0,
channel 0, id 0, lun 0
May 3 20:50:58 flori scsi.agent[4214]: sd_mod: loaded sucessfully
(for disk)
Only a few differences. But with initng no icon appears.
Florian
--
Ticket URL: <http://www.initng.org/ticket/638>
InitNG <http://www.initng.org/>
The Next Generation InitSystem
_______________________________________________
Tickets mailing list
[email protected]
http://jw.dyndns.org/mailman/listinfo/tickets
