Hi Everyone, I want to document an assembly procedure having about 20 major steps with each step consisting of a primary operation preceded by a pre- assembly inspection sub-step and a post-assembly verification sub- step. Many steps will be illustrated with photos.
I'd like my procedure to have some or all of these features: 1) Defined sequence -- the steps must be done in a specific order. See also 6), below. 2) Display one step at a time -- i.e., close other steps. 3) Must click check box to advance to next step. 4) Access to pop-up reference tiddlers via, say, sidebar tag cloud or links embedded in individual steps. 5) Novice / Expert modes in which more or less information is displayed. I expect my experienced operators to actually need only a checklist but the more inexperienced such as trainees and engineers (!) will need hand-holding. It should be easy to switch between modes. 6) Master tiddlers that can employ (deploy?) other tiddlers in a specified sequence. This is important because the procedure steps appliy to a few assemblies with somewhat different content. 7) Minor data collection such as serial numbers, revision codes, go-no- go test results -- stuff like that. Is it possible that someone has collected the right set of plugins for a job like this? Thanks, -- Sam --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "TiddlyWiki" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/TiddlyWiki?hl=en -~----------~----~----~----~------~----~------~--~---
