You could use Morgaine's table as a template. Templates are very important
in TW.
This is a simplified example, because I don't understand auto insurance
etc. that well.
Let's say you had a template tiddler like this:
And a Auto tiddler like this:
Notice how the fields of the tiddlers contain the important information
about the car. If youre TW is not using fields, you will
have to change each tiddler for each car every time there is a new car.
That is a lot of work!
Notice also the template invocation {{||VersicherungTemplate}} .
When closed, this appears as this:
This, of course, is only the start. You would want to move all data about
the auto, including the name and ID,
smogging, inspections, etc. to a tiddler about the car, or perhaps to a
car/year (I am not sure which you are
tracking).
Your TW seems to have only two cars (Toyota Hybrid, Toyota Yaris). If that
is all you need, then it doesn't matter.
But if you want to add many cars, then you will want to use templates.
Good luck!
On Thursday, February 27, 2020 at 2:41:43 AM UTC-8, Gerald Weis wrote:
>
> Hello Morgaine O'Herne
>
> this is functional but its dosn't work if you use a template-tiddler
> The fields of the template wil not be createt in the target tiddler.
> for this to use i must know how i can make the Fields in the target
> tiddler.
> then i can do.
>
>
> Am Donnerstag, 27. Februar 2020 07:21:09 UTC+1 schrieb Morgaine O'Herne:
>>
>> I did it like this: All of the data in the columns is in the Fields.
>> You can see this at http://morgensharn.tiddlyspot.com. The tiddler is
>> "Eriel - Armor Weight."
>>
>> @@.table
>> |ITEM|WEIGHT|
>> |{{!!a1}}|{{!!b1}}|
>> |{{!!a2}}|{{!!b2}}|
>> |{{!!a3}}|{{!!b3}}|
>> |{{!!a4}}|{{!!b4}}|
>> |{{!!a5}}|{{!!b5}}|
>> |{{!!a6}}|{{!!b6}}|
>> |{{!!a7}}|{{!!b7}}|
>> |{{!!a8}}|{{!!b8}}|
>> |{{!!a9}}|{{!!b9}}|
>> |{{!!a10}}|{{!!b10}}|
>> |TOTAL|<$macrocall $name="eval"
>> cell="(=!!b1+!!b2+!!b3+!!b4+!!b5+!!b6+!!b7+!!b8+!!b9+!!b10)" format="2"
>> target="armor">|
>> @@
>>
>>
>>
>> On Sunday, February 23, 2020 at 12:49:12 AM UTC-7, Gerald Weis wrote:
>>>
>>> Hi Folks
>>>
>>> i have a table with 2 columns of numbers.
>>> now i want to have the sum from every columns.
>>>
>>> the Position of the sum shoud be above or below the columns.
>>>
>>> I have no solution found for this.
>>>
>>>
>>> Any Ideas?
>>>
>>> thanks for all
>>>
>>
--
You received this message because you are subscribed to the Google Groups
"TiddlyWiki" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/tiddlywiki/b55659a9-580d-45ed-89a2-3452889f520f%40googlegroups.com.
