Ciao TonyM & all I had a look at the Material Design Icons. Very useful. A couple of notes...
Sizing -- they all seem to be 24x24 so making TW ready versions should be a cinch by simply changing height and width in the SVGs to 22pt x 22pt. License -- though the site says attribution is not strictly necessary I myself favour putting a note directly into the Tiddler after the SVG. This is part so I can, later, know where to go for more. Part because I think it helps other uses to know too if they get included in something public. Part because its basically good to acknowledge. Here is something I made up that I think will work ... <!-- Material Design icon from - https://material.io License - https://www.apache.org/licenses/LICENSE-2.0.html (Apache 2.0) --> Best wishes Josiah -- You received this message because you are subscribed to the Google Groups "TiddlyWiki" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/tiddlywiki. To view this discussion on the web visit https://groups.google.com/d/msgid/tiddlywiki/1a342ebc-f30d-4843-9e81-d92b3be34b35%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
