Hi, I can't seem to get vncviewer to connect to an OSX display exported via VNC if I use the PasswordFile option!
The server is setup using: sudo /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/kickstart -activate -configure -access -on -clientopts -setvnclegacy -vnclegacy yes -clientopts -setvncpw -vncpw mypasswd -restart -agent -privs -all Then the client just does: vncviewer PasswordFile=mypasswd.txt OSX::5900 It says it is connected, but doesn't display anything: CConn: connected to host 192.168.42.111 port 5900 CConnection: Server supports RFB protocol version 3.889 CConnection: Using RFB protocol version 3.8 ^ Stuck at this point, no window appears. But if I do: echo mypasswd | vncviewer passwdInput=1 192.168.42.111::5900 or if I just type the password into the dialog box... it works! I've tried vncviewer 1.0.1 on various platforms and the version that comes with Fedora 13... no go Any ideas? Antoine ------------------------------------------------------------------------------ This SF.net email is sponsored by Sprint What will you do first with EVO, the first 4G phone? Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first _______________________________________________ Tigervnc-devel mailing list Tigervnc-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/tigervnc-devel
