Had K7MLR
At 04:13 PM 4/15/2005, you wrote:
Hi David:
There's an appendix in the Stanford Research manual for the PRS10 Rb oscillator that explains how to make 1,000 measurements each second and thus get 1 ps accuracy every second. It involves using a precision external clock into the SR620 and connecting the Ref Out (1 kHz derived from the internal or Ref oscillator) into the External Gate input. The Start and Stop signals need to be something like 10 MHz, or probably any frequency at or above 1 kHz. And the gate is used to enable a measurement 1,000 times per second.
Each second you could see a drift of 1E-12 and 1E-14 in 10 seconds! I'm going to try using this method to set one Cs standard to the one I think is now set.
Note that some of the HP counters can display a large number of digits per second when measuring frequency, BUT NOT in time interval mode.
I like the SR620!
Have Fun,
Brooke Clarke, N6GCE
-- w/Java http://www.PRC68.com w/o Java http://www.pacificsites.com/~brooke/PRC68COM.shtml http://www.precisionclock.com
David Kirkby wrote:
....
That counter sure was a pretty high-spec device in its day. I looked today in the Standford Research cataloge and they have the SR620
http://www.thinksrs.com/products/SR620.htm
but I note that has a 25ps single shot capture. I've not looked at the current HP (sorry Agilent) specs on this sort of equipment. . . . .
_______________________________________________ time-nuts mailing list [email protected] https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
_______________________________________________ time-nuts mailing list [email protected] https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
