From: "Mike Feher" <[EMAIL PROTECTED]> Subject: [time-nuts] FE-10A Date: Sun, 24 Jul 2005 10:13:36 -0400 Message-ID: <[EMAIL PROTECTED]>
Mike, > All of the sudden I need a 5 MHz reference. I have loads of 10 MHz ones, > but, the only 5 MHz I could find is an FE-10A and a couple of HP 00105 > oscillators. I am pretty sure the 00105s died years ago. What I need is the > pinout on P3 (J3). It is the only connector under the oscillator oven > assembly intended to mate I assume with the power supply. I need to use this > today, to test out a piece of equipment, so, any timely replies would really > be appreciated. A nice bonus would be the meaning of the numbers for the > circuit check switch. The switch is numbered 1 through 9 but not labeled as > to function. Thanks - Mike Have you already ruled out the frequency division with a spare D-flip-flop? Not ideal, but with a sufficiently good flip-flop the additional phase noise isn't too much of an annoyance (depending on your needs naturally). Cheers, Magnus _______________________________________________ time-nuts mailing list [email protected] https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
