Try downloading Monitor3 from the Symmetricom WWW site: http://www.symmetricom.com/support/knowledge_base/software_download.aspx?prodtype=TTM&file=Monitor_setup.zip
Connect your PC to the cesium module with a null modem cable, typically DB-25 on the cesium end. Start by trying either 2400-7-O-2 or 9600-7-O-2. If that doesn't start talking, try running "Detect ComPort settings" on the "File->Configure Serial Port" menu. Monitor3 should work with most of the Datum/FTS 5045/4201 cesium modules. The control functions don't work, but it should be able to read all the monitor parameters, save them, etc. -RL ------------------------------------------------------------ Robert Lutwak, Senior Scientist Symmetricom - Technology Realization Center 34 Tozer Rd. Beverly, MA 01915 (978) 232-1461 Voice [EMAIL PROTECTED] (Business) (978) 927-4099 FAX [EMAIL PROTECTED] (Personal) (339) 927-7896 Mobile > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Behalf Of Magnus Danielson > Sent: 17 March 2006 17:20 > To: [email protected] > Subject: [time-nuts] Telecom Solutions DCD Cesium > > Hi! > > This morning a Telecom Solutions DCD Cesium landed on my lab-bench at > home. > There is something wrong with it, but there should still be some time left > on the tube according to the source. Anyway, I am looking for info (the > manuals > *should* be on the way, but I will not hold my breath) and especially > anything giving away usefull info on the serial port as well as service > info. > > Any hints and tips is welcome. > > In the meanwhile I am figuring out how to solve the 48V problem, but I > have > a cludge available. > > Cheers, > Magnus > > _______________________________________________ > time-nuts mailing list > [email protected] > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts _______________________________________________ time-nuts mailing list [email protected] https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
