Hi: Inside the FTS4060 there's a white plastic Molex like connector that has a male body and female sockets. Probably for use with the optional internal battery & charger.
The male mating part of the body is 0.248" x 0.824". The holes for the contacts are 0.161" ID and the female contacts are 0.084" ID. This looks similar to the Molex 03-09-1042 except that instead of a point on one end this connector has a couple of the corners chamfered sort of like and IEC line cord connector. A drawing and link to data sheet of the Molex connector is at: <http://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?langId=-1&storeId=10001&catalogId=10001&productId=224160> Molex and Amp (Tyco) don't seem to carry anything like it. The three active contacts are: Black = Ground Red = 30 volts from the brick power supply (nice place to connect an external Austron 1290A backup supply) Orange = +5 Volts from chassis voltage regulator (nice place to get power for a TVB divider). Does anyone know what this and it's mating connector are? Have Fun, Brooke Clarke -- w/Java http://www.PRC68.com w/o Java http://www.pacificsites.com/~brooke/PRC68COM.shtml http://www.precisionclock.com _______________________________________________ time-nuts mailing list [email protected] https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
