You must be kidding.  No way are Zip Lok bags hermetic.
Water vapor will diffuse right through.  (Note that waterproof
does not equal hermetic).

Rick N6RK


Brooke Clarke wrote:
> HI Rick:
>
> For humidity control in other applications I have used Zip-Lok bags.
> How about putting the 10811 in a Zip-Lok bag and run the wires through a
> hole that gets epoxy sealed?  Some desiccant would lower the humidity if
> that is an advantage.
>
> Have Fun,
>
> Brooke Clarke
>
> --
> w/Java http://www.PRC68.com
> w/o Java http://www.pacificsites.com/~brooke/PRC68COM.shtml
> http://www.precisionclock.com
>
>
>
> Richard (Rick) Karlquist wrote:
>
>>>Given that HP's engineers have done such a good job with
>>>the oven and oscillator design, is there anything to be gained
>>>by adding extra thermal insulation (lagging)?  How much
>>>
>>>
>>
>>Not a good idea.  The best thing you could do to improve
>>temp stability of a 10811 is to tweak the resistors that
>>proportion the power between the two heater transistors.
>>At some ratio, the thermal gain will peak at over 1000
>>typically.  If you just take pot luck, you would be lucky
>>to do 100.  You are still limited by the tempco of the
>>electronics, no matter what thermal gain you achieve at
>>the crystal.
>>
>>You should also be aware that the 10811 is fairly humidity
>>sensitive, which can seem like temperature sensitivity
>>if the humidity and temperature change together.
>>
>>The HP E1938 was a much better design in terms of environmental
>>insensitivity, but that didn't help much because the
>>ultimate stability was limited by crystal frequency jumps,
>>which didn't seem so bad with the 10811 due to the large
>>environment errors in it.  In the E1938 they stuck out like
>>a sore thumb.
>>
>>Rick Karlquist N6RK
>>
>>
>>_______________________________________________
>>time-nuts mailing list
>>[email protected]
>>https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>>
>>
>>
>
> _______________________________________________
> time-nuts mailing list
> [email protected]
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>
>



_______________________________________________
time-nuts mailing list
[email protected]
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts

Reply via email to