Hi Tom, The reason I investigated this is that I needed a very good (<2E-012 @ 1s) short term ADEV reference to measure the performance of our GPSDO (which is around 2E-012 at 1 second as you know :) on the TSC5120A. I found that I could use the MTI 260 reference from TSC for this purpose up to about 50s intervalls, then switch to the Rb above 50s. They both have their strengths depending on the measurement intervall.
It would make sense to slave an MTI 260 OCXO to a PRS10 with a PLL lock time of about 20s. This would generate a very clean output - the Phase noise of the 260 is better than the PRS10, as well as the ADEV <20s would be improved. bye, Said _______________________________________________ time-nuts mailing list [email protected] https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
