Anyone have datasheet or operating conditions for a ERC (Electronic Research Company) EROS-750-LGL-2REVA 10 MHz OVCXO? It has six pins on the side, with pin #1 on the left. Mine has a wiring harness installed as follows: #1 - Red #2 - Black and paralleled with coax shields #3 - Coax center, shield is to #2 #4 - Orange #5 - N/C #6 - Coax center, shield is to #2 Ground is obviously #2. The coax outputs are presumably sine out and EFC. If I attach +15V to orange, it sucks 0.5A and then drops down to 0.1A. So presumably this is the heater. I've tried +12V and +15V on red, but I'm not seeing an output on either coax. I'm hestitant to try higher voltages, unless I get some more info. I suppose it is possible I need to hold EFC at some level to get the oscillator running ... ? Thanks, -- Christopher. _______________________________________________ time-nuts mailing list [email protected] https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
